• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.121-129
• /
• 2011

As the molecular breeding was progressed, many plant transformation techniques were attained for improving transformation accuracy and used to produce useful transgenic plants. Day by day, new varieties were developed so new transformation techniques required for these newly developed varieties. Carnation (Dianthus caryophyllus L.) is a popular and economically important ornamental plant, all over the world. Keeping this in view, we selected 18 varieties of D. caryophyllus L. commonly available in the market and did optimization of culture conditions for more efficient tissue culture and to get higher number of plants via micro-propagation. Four varieties namely Yellowdotcom, Jakarta, Belmonte, Polartessino etc. were selected for organ culture studies from single cell line. The optimum growth was recorded in the MS media supplied with sucrose 3%, NAA 1.0 mg/L and TDZ 1.0 mg/L. except Belmonte, in which, BA 1.0 mg/L was found to be the best combination, in place of TDZ, rest ingredients were same. The most efficient coagulating agent used to obtain higher number of plant from callus was phytagel 0.3%. The most effective explant for higher shoot formation was stem in which 80.2% shoot formation was recorded. It also reduced culture periods by 6 days.

• Clean Technology
• /
• v.13 no.1 s.36
• /
• pp.64-71
• /
• 2007

The selection of a suitable adsorbent for removing organic sulfur compounds tetrahydrothiophene (THT) and t-butylmercaptan (TBM) from natural gas has been carried out. The saturation adsorption capacity for the sulfur compounds were determined by pulse adsorption method for a group of nanoporous materials, including Na-Y, Na-ZSM-5, Na,K-ET(A)S-10, Na-Mordenite, Na,K-Clinoptitolite, Ti/MCM-41, Ti/SBA-15 and amorphous titanosilicates. Among the materials tested, Na-Y and Na,K-ET(A)S-10 zeolites showed high adsorptive capacities for THT and TBM. The saturation capacity for THT on Na,K-ETS-10 was comparable with that on Na-Y zeolite, which is well known as an effective adsorbent. The capacity and adsorptivity for THT and TBM on Na,K-ETAS-10 were improved by an increase in crystallinity of Na,K-ETAS-10. An investigation of the competitive adsorption between THT and TBM from the breakthrough test using a simulated natural gas indicates that Na,K-ETS-10 selectively adsorbs THT. The breakthrough capacity for THT on Na,K-ETS-10 was 1.19 mmol/g. The results show that the high adsorption performance of Na.K-ETS-10 and Na,K-ETAS-10 is due to the highly exchanged cations in the zeolitic structure which exhibit the strong electrostatic interactions with organic sulfur compounds and their wide pore nature.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.3
• /
• pp.191-199
• /
• 2000

Genomics is providing targets faster than we can validate them and combinatorial chemistry is providing new chemical entities faster than we can screen them. Historically, the drug discovery cascade has been established as a sequential process initiated with a potency screening against a selected biological target. In this sequential process, pharmacokinetics was often regarded as a low-throughput activity. Typically, limited pharmacokinetics studies would be conducted prior to acceptance of a compound for safety evaluation and, as a result, compounds often failed to reach a clinical testing due to unfavorable pharmacokinetic characteristics. A new paradigm in drug discovery has emerged in which the entire sample collection is rapidly screened using robotized high-throughput assays at the outset of the program. Higher-throughput pharmacokinetics (HTPK) is being achieved through introduction of new techniques, including automation for sample preparation and new experimental approaches. A number of in vitro and in vivo methods are being developed for the HTPK. In vitro studies, in which many cell lines are used to screen absorption and metabolism, are generally faster than in vivo screening, and, in this sense, in vitro screening is often considered as a real HTPK. Despite the elegance of the in vitro models, however, in vivo screenings are always essential for the final confirmation. Among these in vivo methods, cassette dosing technique, is believed the methods that is applicable in the screening of pharmacokinetics of many compounds at a time. The widespread use of liquid chromatography (LC) interfaced to mass spectrometry (MS) or tandem mass spectrometry (MS/MS) allowed the feasibility of the cassette dosing technique. Another approach to increase the throughput of in vivo screening of pharmacokinetics is to reduce the number of sample analysis. Two common approaches are used for this purpose. First, samples from identical study designs but that contain different drug candidate can be pooled to produce single set of samples, thus, reducing sample to be analyzed. Second, for a single test compound, serial plasma samples can be pooled to produce a single composite sample for analysis. In this review, we validated the issue whether the second method can be applied to practical screening of in vivo pharmacokinetics using data from seven of our previous bioequivalence studies. For a given drug, equally spaced serial plasma samples were pooled to achieve a 'Pooled Concentration' for the drug. An area under the plasma drug concentration-time curve (AUC) was then calculated theoretically using the pooled concentration and the predicted AUC value was statistically compared with the traditionally calculated AUC value. The comparison revealed that the sample pooling method generated reasonably accurate AUC values when compared with those obtained by the traditional approach. It is especially noteworthy that the accuracy was obtained by the analysis of only one sample instead of analyses of a number of samples that necessitates a significant man-power and time. Thus, we propose the sample pooling method as an alternative to in vivo pharmacokinetic approach in the selection potential lead(s) from combinatorial libraries.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.91-99
• /
• 2018

This paper has proposed a low-noise and high-linear RF receiver supporting TV white space from 470 MHz to 698 MHz), which is implemented in $0.13-{\mu}m$ CMOS technology. It consists of a low-noise amplifier, a RF band-pass filter, a RF amplifier, a passive down-conversion mixer, and a channel-selection low-pass filter. A low-noise amplifier and RF amplifier provide a high voltage gain to improve the sensitivity level. To suppress strong and nearby interferers, two RF filtering schemes have been performed by using a RF BPF and a down-conversion mixer. The proposed LPF has been based on the common-gate topology and adopted a bi-quad cell to achieve -24dB/oct characteristics. In addition, the RF receiver can support the overall TV band by controlling a LO frequency. The simulated results show a voltage gain of 56 dB, a noise figure of less than 2 dB, and an out-of-channel IIP3 of -2.3 dBm. It consumes 37 mA from a 1.5 V supply voltage.

• Korean Journal of Plant Resources
• /
• v.18 no.1
• /
• pp.15-21
• /
• 2005

Korean ginseng(Panax ginseng C.A. Meyer) is very difficult to obtain stable production of qualified ginseng roots because of variable stresses in soil environments. In transformation of ginseng with betain aldehyde dehydrogenase gene, compounds synthesized for controlling osmotic pressure such as proline, glycine, betaine, polyols and sugar were accumulated in cell for salt resistance in transgenic plants. 2 Agrobactgerium conjugants were acquired with bet A and bet B genes for solt resistant plants. A. tumefaciens MP90/pBetA and A. tumefaciens MP90/pBetB were recombined for increasing the tolerance to salt stress. To confirm the transformation of the binary vector, tobacco plant was transformed, and the transformant can grow on media containing high concentration of kanamycin. To identify NPT 11, BetA and BetB genes of the transformants, the band on the agarose was confirmed by PCR and RT-PCR techniques. The transformants of ginseng with bet A and bet B genes were acquired on the phytohormone free basic MS media containing only antibiotics and 1M mannitol used for selection of transgenic plant, but the transfomation efficiency for BetA and BetB was very low.

• Journal of Gastric Cancer
• /
• v.7 no.3
• /
• pp.160-166
• /
• 2007

Purpose: Recently, chemosensitivity tests have become widely used for the selection of effective drugs in gastric cancer patients. In this study, a chemosensitivity test was performed to select agents to increase the effectiveness of adjuvant chemotherapy. Materials and Methods: Chemosensitivity testing was performed in 81 gastric cancer patients that received a gastrectomy at the Yeungnam University Hospital. An ATP (adenosine triphosphate) based chemotherapy response assay was used. Clinicopatholgical factors such as sex, age, expression of tumor markers (CEA and CA19-9 levels), location of the tumor, morphology of advanced cancer, histological type, cell differentiation, depth of invasion, Lauren classification, Ming classification, lymphatic invasion, vascular invasion, neural invasion, lymph node metastasis and TNM stage were used to correlate the chemosensitivity and clinicopathological factors. Results: The most effective antitumor agents in gastric cancer patients were (in order of effectiveness) 5-FU, Epirubicin, lrinotecan and Oxaliplatin in our series. The chemosensitivity test showed a significant difference in susceptibility according to clinicopathological factors. Conclusion: Further studies on multidrug therapy are needed to evaluate synergistic effects of drugs. Therefore, for effective chemotherapy, it is more efficacious to select a chemosensitive drug than continue to use the same drug regimen.

• Journal of Embryo Transfer
• /
• v.31 no.1
• /
• pp.1-7
• /
• 2016

Xenotransplantation involves multiple steps of immune rejection. The present study was designed to produce nuclear transfer embryos, prior to the production of transgenic pigs, using fibroblasts carrying transgenes human complement regulatory protein hCD59 and interleukin-18 binding protein (hIL-18BP) to reduce hyperacute rejection (HAR) and cellular rejection in pig-to-human xenotransplantation. In addition to the hCD59-mediated reduction of HAR, hIL-18BP may prevent cellular rejection by inhibiting the activation of natural killer cells, activated T-cell proliferation, and induction of $IFN-{\gamma}$. Transgene construct including hCD59 and ILI-18BP was introduced into miniature pig fetal fibroblasts. After antibiotic selection of double transgenic fibroblasts, integration of the transgene was screened by PCR, and the transgene expression was confirmed by RT-PCR. Treatment of human serum did not affect the survival of double-transgenic fibroblasts, whereas the treatment significantly reduced the survival of non-transgenic fibroblasts (p<0.01), suggesting alleviation of HAR. Among 337 reconstituted oocytes produced by nuclear transfer using the double transgenic fibroblasts, 28 (15.3%) developed to the blastocyst stage. Analysis of individual embryos indicated that 53.6% (15/28) of embryos contained the transgene. The result of the present study demonstrates the resistance of hCD59 and IL-18BP double-transgenic fibroblasts against HAR, and the usefulness of the transgenic approach may be predicted by RT-PCR and cytolytic assessment prior to actual production of transgenic pigs. Further study on the transfer of these embryos to surrogates may produce transgenic clone miniature pigs expressing hCD59 and hIL-18BP for xenotransplantation.

• Journal of Embryo Transfer
• /
• v.29 no.3
• /
• pp.283-287
• /
• 2014

Sexed semen is commonly used for the production of calves of the desired gender. Gender selection is important in animal production industries. For example, female cattle are required for the dairy industry while males are preferred in the beef cattle industry. The present study was to assess the in vivo embryo production efficiency using the semen separated according to sex during superovulation in Hanwoo. Seventy Hanwoo donor cows were flushed on day 7 of estrus cycle with same FSH and artificial insemination by the same technicians. Embryos were recovered on 7 days after the third insemination by flushing the uterus with embryo collection medium. KPN semen straws used artificial insemination contained 20 million sperm (total number 60 million per donor). Sex-sorted semen straws contained 4 million sperm (total number 12 million per donor). The results obtained were as follows: No differences were observed in the efficiency of superovulation rates on KPN semen 87%, and sexed semen 100%, respectively. The mean numbers of total embryos are each $12.58{\pm}8.31$ and $13.25{\pm}7.86$. The mean numbers of transferable embryos, sexed semen were significantly lower than KPN semen ($3.75{\pm}1.98$ vs. $8.23{\pm}6.07$, P<0.05). The rates of unfertilized embryos from superovulation using sexed semen were significantly higher than KPN semen (50% vs. 15%, P<0.05). The rate of degenerated 2-cell embryos from sexed and KPN semen was 60.87% and 11.11%, respectively (p<0.05). In conclusion, these results indicate that superovulation using sexed semen was useful, but efficient embryo production was important to reducing the damage caused by the Flowcytometer-based sperm sorting procedure.

• The KIPS Transactions:PartD
• /
• v.16D no.5
• /
• pp.767-790
• /
• 2009

Setting up a priorityfor an embedded system is greatly significant because a release plan at the early stage of product developments can properly be established through right decision making procedures based on the priorities. For instance, both dependencies among requirements and the aspects of product developers should be considered into the priorities to improve the embedded system. Especially, trade-offs among the requirements, which are quite different depending on H/W and S/W architecture styles they use, should be acknowledged without exception. However, the selection process on the priority has hitherto been fairly systematic in the existing environment where hardware and software are not being considered at once. Therefore, this paper suggests an dependency and aspect-based model and process for the requirements of the priority. For this, the paper analyzes the trade-offs between the requirements depending on the disparate Architecture styles of H/W and S/W, and it also reflects the viewpoints of the developers. For thelast thing, the model and process suggested will be applied to the case of the development of both cell phones and cameras to gain authenticity and reliability. In conclusion, the danger occurring when the release plan is constructed can be minimized by screening the priorities that optimizes the embedded system more explicitly.