• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.2
• /
• pp.103-108
• /
• 2005

For more accurately describing the durations of the light and the dark phases of micro-algal cells over the whole light-dark cycle, and probing into the relationship between the liquid circulation time or velocity, the aeration rate and cell density, a series of experiments was carried out in 10 cm light-path flat plate photobioreactors. The results indicated that the liquid flow in the flat plate photobioreactor could be described by liquid dynamic equations, and a high biomass output, higher content and productivity of arachidonic acid, $70.10\;gm^{-2}d^{-1},\;9.62\%$ and 510.3 mg/L, respectively, were obtained under the optimal culture conditions.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.306-309
• /
• 2005

One of the most critical issues in sol id oxide fuel cell (SOFC)running on hydrocarbon fuels is the risk of carbon formation from the fuel gas. The simple method to reduce the risk of carbon formation from the reactions is to add steam to the fuel stream, leading to the carbon gasification react ion. However, the addition of steam to fuel is not appropriate for the auxiliary power unit (APU) and potable power generation (PPG) systems due to an increase of complexity and bulkiness. In this regard, many researchers have focused on so-called 'direct methane' operation of SOFC, which works with dry methane without coking. However, coking can be suppressed only by the operation with a high current density, which may be a drawback especially for the APU and PPG systems. The single chamber fuel cell (SC-SOFC) is a novel simplification of the conventional SOFC into which a premixed fuel/air mixture is introduced. It relies on the selectivity of the anode and cathode catalysts to generate a chemical potential gradient across the cell. Moreover it allows compact and seal-free stack design. In this study, we fabricated honeycomb type mixed-gas fuel cell (MGFC) which has advantages of stacking to the axial direction and increasing volume power density. Honeycomb-structured SOFC with four channels was prepared by dry pressing method. Two alternative channels were coated with electrolyte and cathode slurry in order to make cathodic reaction sites. We will discuss that the anode supported honeycomb type cell running on mixed gas condition.

• The Korean Journal of Malacology
• /
• v.14 no.2
• /
• pp.131-147
• /
• 1998

A histochemical and ultrastructural study on the epithelia of some selected digestive tracks such as esophagus, crop, intestine of a land snail N. samarangae was carried out during the period of June 1997 to may 1998. The epithelium of digestive tract are simple columnar epithelium and consisted of five types of columnar cells. Type 1 cell which is majority in number has a brush border with microvilli on the free surface of the cell and contains numerous secretory granules supposed to be neutral mucopolysaccharide. Type 2 cell, elongated conical in shape, is rarely found in the epithelium. This cell also has a brush border with microvilli on its free surface and contains well developed rough surfaced endoplasmic reticulum, Golgi bodies, and secretory granules in various electron densities. This cell seems to produce both of acid and neutral mucopolysaccharides. Type 3 cell, which is morphologically similar to the Type 1 cell, has microvilli and cilia on the free surface and exists in group only in the limited regions of the intestine. Type 4 cell, typical goblet cell containing secretory granules in high electron density. Type 5 cell rarely found in the digestive tract. This cell contain inconspicuous materials.

• International Journal of Automotive Technology
• /
• v.8 no.1
• /
• pp.119-126
• /
• 2007

Because of the low temperature operation, proton exchange membrane (PEM) fuel cell has a water phase transition. Therefore, water management is an important operation issue in a PEM fuel cell because the liquid water in the fuel cell causes electrode flooding that can lower the cell performance under high current density conditions. In this study, in order to understand the reactant distributions in the cathode channels of the PEM fuel cell, an experimental technique that can measure the species concentrations of reactant gases by using gas chromatograph (GC) is applied for an operating PEM fuel cell. The oxygen distribution along the cathode flow channels of PEM fuel cell is mainly investigated with various operating conditions. Also, the relations between cathode flooding and oxygen concentrations and oxygen consumption pattern along the cathode channel configurations of the unit cell adopted for this study are discussed using GC measurement and visualization experiment of cathode flooding. It is found that the amount of oxygen consumption is very sensitive to various operating conditions of the fuel cell and was much affected by the flooding occurrence in cathode channels.

• Korean Journal of Materials Research
• /
• v.14 no.5
• /
• pp.368-373
• /
• 2004

To improve the conventional cathode-supported tubular solid oxide fuel cell (SOFC) from the viewpoint of low cell power density, expensive fabrication process and high operation temperature, the anode-supported tubular solid oxide fuel cell was investigated. The anode tube of Ni-8mol% $Y_2$O$_3$-stabilized $ZrO_2$ (8YSZ) was manufactured by extrusion process, and, the electrolyte of 8YSZ and the multi-layered cathode of $LaSrMnO_3$(LSM)ILSM-YSZ composite/$LaSrCoFeO_3$ were coated on the surface of the anode tube by slurry dip coating process, subsequently. Their cell performances were examined under gases of humidified hydrogen with 3% water and air. In the thermal cycle condition of heating and cooling rates with $3.33^{\circ}C$/min, the anode-supported tubular cell showed an excellent resistance as compared with the electrolyte-supported planar cell. The optimum hydrogen flow rate was evaluated and the air preheating increased the cell performance due to the increased gas temperature inside the cell. In long-term stability test, the single cell indicated a stable performance of 300 mA/$\textrm{cm}^2$ at 0.85 V for 255 hr.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.3
• /
• pp.226-231
• /
• 2022

Power converter are usually equipped for fuel cell power generation system to connect alternating current (AC) electric power grid. When converting direct current (DC) of fuel cell power source into AC, the power converter has a frequency ripple, which affects the fuel cell and the grid. Therefore, an equivalent circuit having dynamic characteristics of fuel cell power, for example, impedance, is useful for designing an inverter circuit. In this study, the current, voltage and impedance characteristics were calculated through fuel cell modeling and validated by comparing them with experiments. The equivalent circuit element values according to the current density were formulated into equations so that it could be applied to the circuit design. It is expected that the process of the equivalent circuit modeling will be applied to the actual inverter circuit design and simulated fuel cell power sources.

• Journal of Nutrition and Health
• /
• v.31 no.8
• /
• pp.1235-1243
• /
• 1998

Although an elevated plasma level of high density lipoprotein (HDL) is known as a protective component against the development of atherosclerosis and ensuing coronary heart diseases, the related mechanisms are still not established . It has been clearly demonstrated in the early stages of atherogenesis that adhesion of monocytes and lymphocytes to the vascular endothelium is enhanced via adhesion molecules, and that monocytes and macrophages accumulate in the subendothelial space. The present study has investigated whether isolated plasma HDL plays a role in protection against atherogenesis by inhibiting the expression of vascular cell adhesioin molecule-1(VCAM-1) on the endothelial cells. Effects of plasma native low density lipoprotein (LDL) and ac ethylated LDL(AcLDL) on VCAM-1 expression were also examined by using an immunocytochemical technique. While plasma HDL did not alter the basal expression of VCAM-1 , lipopolysaccharide(LPS) induction of this adhesion modlecule was markedly inhibited at a phyaiological concentration of HDL. In contrast, 30$\mu\textrm{g}$ protein/ml AcLDL increased sifnificantly both basal VCAM-1 expression and its LPD induction , suggesting that this modified LDL enhances leukocyte adhesiion to endothelial cells. Unlike AcLDL , plasma native LDL inhibited significantly VCAM-1 expression. This indicates that LDL did not undergo oxidative modificantion while incubated with endothelial cells. These results suggest that plasam HDL may inhibit atherogenesis by reducing the expression of adhesion molecules, which is a protective mechanism independent of tis reverse cholesterol transport function . Modified LDL is a potent iducer for adhesion molecules in vascular endothelical cells and could play a role in the pathogenesis of atherosclerosis by adhering to blood cells.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.32 no.1
• /
• pp.1-8
• /
• 2010

Background and Purpose: Vascular endothelial growth factor (VEGF)-C and VEGF receptor (VEGFR)-3 are involved in tumor lymphangiogenesis. Oral mucosal squamous cell carcinoma (OMSCC) preferentially metastasizes to cervical lymph nodes, so we investigated the expression and distribution of VEGFR-3 signaling proteins in OMSCC. Materials and Methods: Tissue samples of 18 OMSCC, 10 oral mucosal leukoplakia, and 3 normal oral mucosa were evaluated for expression of VEGF-C, VEGF-D, and VEGFR-3 by immunohistochemical staining. The presence of lymphatic vessels was determined using D2-40 staining, by which we also measured lymphatic vessel density (LVD). Results: 72% (13/18) and 56% (10/18) of tissue samples showed VEGF-C and VEGF-D immunopositivity in tumor cells and tumor-associated endothelial cells. VEGFR-3 was also expressed in most of OMSCC, which was up-regulated when compared with normal mucosa or with leukoplakia. Furthermore, LVD was higher in OMSCC than in leukoplakia. Conclusion: Taken together, our results suggest that autocrine activation of lymphatic endothelial cell via VEGFR-3 by VEGF-C and/or VEGF-D could be involved in progression of OMSCC. Therefore, VEGF-C/VEGFR-3 signaling pathway can be a molecular target for anti-metastatic therapy in OMSCC.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.3
• /
• pp.406-410
• /
• 2002

A new spin filter consisting of $50{\mu}m$ (nominal pore size) depth fitters rolled on a stainless steel grid was developed, using Saccharomyces cerevisiae as a model suspension cell to evaluate the spin filter performance. In a 1.8-1 fermentor with a rotation speed of 300 rpm and perfusion rate of 4 ml/min, a cell concentration of 49 g/l and ethanol concentration of 45 g/l from 100 g/l glucose could be obtained in a perfusion culture. The major mechanisms for cell separation used by the large-pore spin filter appeared to be centrifugal force and pivotal movement of the cells in the spin filter.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.1024-1030
• /
• 2001

The key factors for high-density Haematococcus pluvialis cultures and conditions for astaxanthin induction were examined to maximize astaxanthin production. Light intensity was found to be the most important factor, and thus experiments were found to be the most important factor, and thus experiments were carried out using different light sources and intensities. A high cell density of over 2.7 g/l was obtained at $75{\mu}E/m^2/s$, whereas a much lower cell concentration (<1.0 g/ 1) was obtained with lower light intensities $(15-30{\mu}E/m^2/s$. A high light intensity and the supplement of 470 nm photons had a more dramatic effect on the final astaxanthin concentration and per cell astaxanthin content. A maximum astaxanthin concentration of 6.5 mg/l was obtained at a light intensity of $160{\mu}E/m^2/s$, whereas only 1.3 and 0.7 mg/l were obtained at 30 and $15{\mu}E/m^2/s$, respectively. A supplement of 470 nm photons enhanced the carotenoid and chlorophyll formation.