• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.4
• /
• pp.281-286
• /
• 2019

Raman spectra of a-C:H thin films deposited with an unbalanced magnetron sputtering system showed that the G peak shifted to a higher wavenumber as the target power density increased and $I_D/I_G$ ratio increased from 0.902 to 1.012. Moreover, the transmittance of a-C:H films fabricated at 60 nm tended to decrease with increasing target power density; at 550 nm in the visible light region, the transmittance decreased from 69% to 58%. The rms surface roughness values of the a-C:H thin films decreased with increasing target power density, and varied from 1.11 nm to 0.71 nm. In order to achieve efficient light trapping, the light scattering at the rough interface must be enhanced. Consequently, the surface roughness of the thin film will decrease with the target power density. Further, the refractive index and reflectivity of the a-C:H thin films increased with increasing target power density; however, the Brewster angle decreased with the target power density. Hence, dye-sensitized solar cells using an a-C:H antireflective coating increased the CE, $V_{OC}$, and $J_{SC}$ by approximately 8.6%, 5.5%, and 4.5%, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.37-37
• /
• 2005

Human chorionic gonadotropin (hCG) is a heterodimeric glycoprotein hormone consisting of non-covalently linked two subunits, the ${\alpha}$ and ${\beta}$ subunit. It has been used as a infertility drug for ovulation to mimic luteinizing hormone $(LH).^{1)}$ A stable cell line was established by transfection of Rc/CMV-i-dhfr-hCG, expression vector containing hCG ${\alpha}-$ and ${\beta}-genes$, into dihydrofolate reductase-deficient CHO cells and subesquent methotrexate-mediated gene amplification. Anchorage-dependent CHO cells were adapted into a serum-free and/or animal component-free suspension medium through gradual serum weaning for the hCG production. The established cell line showed typical morphological characteristics and growth profile of CHO cells, and could produce FSH with passage-to-passage consistency. The high density perfusion culture of the CHO cells was carried out in Celligen Plus bioreactor equipped with a spin-filter as a internal cell retention device. The cell density reached up to $>1x10^{7}$ cells/ml in less than 7 days and a perfusion-control strategy based on cellular consumption rates of glucose was $established.^{2)}$ Biologically active recombinant hCG was purified by a series of chromatographic steps including anion exchange chromatography and hydrophobic interaction chromatography to homogeneity. The highly purified recombinant hCG was characterized for physicochemical, immunological and biological properties.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.4
• /
• pp.301-305
• /
• 2001

The co-expression of the arg U gene in a double-vector expression system of recombi-nant Escherichia coli BL22(DE3)[pET-IEN2a+pAC-argU] significantly enhanced the production level of reconminant human interferon -$\alpha$2a(rhIFN-$\alpha$2a) in high cell density cultures, compared to a recombinant E. coli culture containing only the single expression vector, pET-IEN2a. The dry cell mass concentration increased to almost 100 g/L, and more than 4 g/L of rhIFN-$\alpha$2a was accumu-lated in the culture broth. Evidently, the synthesis of rhIFN-$\alpha$2a was strongly dependent on the pre-induction growtih rate and more efficient at a higher specific growth rate. The additional sup-ply of tRN $A^{Arg(AGG/AGA)}$ enhanced the expression level of the rhIFN-$\alpha$2a gene in the early stage of the post-induction phase, yet thereafter the specific production rate of rhIFN-$\alpha$2a rapidly de-creased due to severe segregational instability of plasmid vector pET-IEN2a. It would appear that the plasmid instability with only occurred to pET-IEN2a in the double vector system, was re-lated to the effect of translational stress due to the over expression of rhIFN-$\alpha$2a.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.286-286
• /
• 2009

A small PEM fuel cell has two different stack configurations such as active and passive stacks. The active stack has a distintion of high power density although it makes system complex by using alr blower and related BOPs resulting in large system volume. On the contrary, passive stack has an advantage of compact system because it doesn't need air supplying devices although it reveals relatively low stack power density. In this study we fabricated two 10W PEMFC stacks with different stack configurations, active and passive stacks, and tested their performance and stability. The active stack consists of 13cells with an active area of $5cm^2$. The passive stack has 12cells with an active area of $16cm^2$. When we compared the stack performance of those stacks, the active stack showed higher power density compared to the passive stack, particularly at high voltage regions. However, at low voltage and high current regions, the passive stack performance was comparable to the active stack. The stack stability was largely dependent on the fuel humidity, particularly for active stack. At low humidity conditions, the active stack performance was decreased continuously and the cell voltage distribution was not uniform showing seriously low cell voltage at center cells mainly due to the cell drying. The passive stack showed relatively stable behavior at low humidity and the stack performance was largely dependent on the atmospheric conditions.

• Journal of Embryo Transfer
• /
• v.15 no.2
• /
• pp.129-136
• /
• 2000

This study was carried out to investigate the effect of biological factors on the in vitro production(IVP) of bovine oocytes for development of simple culture methods and medium. Oocytes from the slaughterhouse ovaries were matured and fertilized using general protocol and this study was examined if there were necessary to co-culture, media change, media type and embryo density. This results were as follows: 1. The development rate according to co-culture with cumulus cells and non co-culture as drop culture was not significantly different in cleavage (68.9 vs 71.7%), 8-cell stage (41.2 vs 44.1%) and blastocyst stage (12.2 vs 13.8%), respectively (p<0.05) 2. The blastocyst development rates in YS and CRIaa were higher than that in TCM199 (12.4, 10.4$ vs 3.7%), but the cleavage (69.0, 77.8 and 61.0%) and 8-cell stage (31.7, 37.0 and 35.7%) development accoring to YS, TCM199 and CRIaa ws not significantly different, respectively (p<0.05). 3. There was no significantly different in cleavage (62.6, 59.5 and 61.2%), 8-cell(34.7, 37.9 and 34.0%) and blastocyst (9.5, 11.6 and 12.8%) development among medium change time as control, Group I and Group II, respectively (p<0.05). 4. Blastocyst formation of 8-cell stage according to embryo density was not significantly different in 1, 10 and 25 embryos (27.3, 22.5 and 34.0%), respectively (p<0.05). These results indicated that simple culture system could reduce bovine IVP embryos as drop culture as non co-culture system, high density embryo (25 embryos/50 $\mu$1 drop). YS defined medium and no medium change for whole culture period, although other biological factors need to examine in order to produce efficient IVP bovine embryos.

• Current Photovoltaic Research
• /
• v.2 no.2
• /
• pp.59-62
• /
• 2014

Minority carrier diffusion length is one of the most important parameters of solar cells, especially for short circuit current density (Jsc). In this report, we proposed the calculating method of the minority carrier diffusion length ($L_n$) in CIGS solar cells through biased quantum efficiency (QE). To verify this method's reliability, we chose two CIGS samples which have different grain size and calculated $L_n$ for each sample. First of all, we calculated out that $L_n$ was 56nm and 97nm for small and large grain sized-cell through this method, respectively. Second, we found out the large grain sized-cell has about 7 times lower defect density than the small grain sized-cell using drive level capacitance profiling (DLCP) method. Consequently, we confirmed that $L_n$ was mainly affected by the micro-structure and defect density of CIGS layer, and could explain the cause of Jsc difference between two samples having same band gap.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.11
• /
• pp.1534-1538
• /
• 2010

Fed-batch cultures of Hansenula polymorpha were studied to develop an efficient biosystem to produce recombinant human serum albumin (HSA). To comply with this purpose, we used a high-purity oxygen-supplying strategy to increase the viable cell density in a bioreactor and enhance the production of target protein. A mutant strain, H. polymorpha GOT7, was utilized in this study as a host strain in both 5-l and 30-l scale fermentors. To supply high-purity oxygen into a bioreactor, nearly 100% high-purity oxygen from a commercial bomb or higher than 93% oxygen available in situ from a pressure swing adsorption (PSA) oxygen generator was employed. Under the optimal fermentation of H. polymorpha with highpurity oxygen, the final cell densities and produced HSA concentrations were 24.6 g/l and 5.1 g/l in the 5-l fermentor, and 24.8 g/l and 4.5 g/l in the 30-l fermentor, respectively. These were about 2-10 times higher than those obtained in air-based fed-batch fermentations. The discrepancies between the 5-l and 30-l fermentors with air supply were presumably due to the higher contribution of surface aeration over submerged aeration in the 5-l fermentor. This study, therefore, proved the positive effect of high-purity oxygen in enhancing viable cell density as well as target recombinant protein production in microbial fermentations.

• Applied Chemistry for Engineering
• /
• v.23 no.3
• /
• pp.297-301
• /
• 2012

Microbial fuel cell (MFC) is the major of bio-electrochemical system which can convert biomass spontaneously into electricity through the metabolic activity of the microorganisms. In this study, we used an activated sludge as a microbial inoculum and then investigated the feasibility of using dairy wastewater as a possible substrate for generating electricity in MFC. To examine the performance of MFC as power generator, the characteristics on cell potentials, power density, cyclic voltammetric analysis and sustainable power estimation were evaluated for dairy wastewater. The maximum power density of $40\;mW/m^2$was achieved when the dairy wastewater containing 2650 mg/L COD was used, leading to the removal of 88% of the COD. The results from this study demonstrate the feasibility of using MFC technology to generate electricity while simultaneously treating dairy wastewater effectively.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.414-421
• /
• 1999

The influenced of light intensity, cell density, and light pathlength on photosynthetic activity of Chlorella vulgaris were investigated. Since the light respon curve varied according to reaction conditions, the parameters estimated from nonlinear regression were proved to be apparent and could not be applied to various situations. The light response model incorporating the light penetration through the microalgal suspension was developed based upon the spatial distribution of the photosynthetic activity. This model showed a good agreement with experimental data at different cell densities and light intensities. Using the model the effects of cell density and light pathlenth were simulated and some dicussions about optimization of operation conditions of photobioreactors were carried out. Concludingly, the developed model can be useful for predicting microalgal photosynthesis and for determining the optimal operating conditions.

• Journal of Digital Convergence
• /
• v.14 no.6
• /
• pp.245-251
• /
• 2016

A numerical model is developed to predict distributions of current density and temperature. Also the complete fuel cell performances were compared. In this study the effect of flow field design and flow direction on current density and temperature distribution as well as full cell performance. The complete three-dimensional Navier-Stokes equations were solved with convergence of electro-chemical reactions terms. In this paper, the two different flow field design were simulated, straight channel and rectangular serpentine flow channel, which is commonly used. The effect of flow direction, co-flow and counter-flow, was also analyzed. The current density and temperature is higher with abundant oxygen not fuel. Also, temperature distribution was able to be drawn by using computer simulation. In this paper, the relationship among flow pattern, flow field design and current denstity distribution.