• Korean Journal of Ecology and Environment
• /
• v.41 no.1
• /
• pp.26-33
• /
• 2008

To understand the effect of water temperature on growth pattern of Stephanodiscus sp., we weekly or biweekly investigated in the lower part of the Nakdong River from 1994 to 2006 and performed a laboratory experiment. Stephanodiscus was the most dominant species among phytoplankton in winter when low flow persisted and the high abundances of the species were maintained from December to February. Three strains of Stephanodiscus sp. were isolated for the in vitro experiment from the Nakdong River in January 2005. Over the water temperature range of $4^{\circ}C$ to $20^{\circ}C$, the growth patterns of Stephanodiscus sp. were different in the short-term batch culture. The maximum cell density of Stephanodiscus sp. was observed at approximately $5^{\circ}C$ in the river systems, but the optimum water temperature of Stephanodiscus sp. was $10^{\circ}C$ for the growth in the laboratory experiment. However, the proliferation of Stephanodiscus sp. was related to low water temperature in the Nakdong River.

• Journal of Life Science
• /
• v.7 no.4
• /
• pp.377-383
• /
• 1997

The acute toxicity effect of triorganotin of trioganotin on the growth of microalgae and shellfish was investigated through flask culture. The value of 120 hr-LC$_{50}$ that is the median lethal concentration of TBTO on the shellfish (R. philipinarum) was found to be 6 $\mu$g/L. The acute toxicity effect of TBTO on T. suecica was obviously shown even at the concentration of 0.5 $\mu$g/L, and the effect diminished as the initial cell density increased. The effect also diminished less in the experiment done under aeration than in that done under non-aeration. To design a chemostat system for the test of chronic toxicity, the culture of T. suecica was executed in photobioreactor. In batch culture, the profiles of chlorophyII a and D.C.W. showed the growth of T. suecica very well, and the maximum specific growth rate was estimated to be 0.54 d$^{-1}$. with this value, as a dilution rate in contimuous culture, pH was nicely maintained between 7 and 9 when air was supplied with 3% CO$_{2}$. From all results and the natural environment of clam, a novel chemostat system was invented. Through this system, we can observe each independent toxicity effect of TBTO and plankton and combined toxicity effect as well.

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.359-364
• /
• 2010

Lactobacillus acidophilus A12 was isolated from chicken feces for use as an immunostimulating livestock probiotic. The purpose of this study was to optimize the production of L. acidophilus A12 using response surface methodology (RSM). Initially, the influence of growth medium was studied in terms of carbon sources (glucose, fructose, lactose, glycerol, sucrose, ethanol, and mannitol), nitrogen sources (beef extract, yeast extract, malt extract, and tryptone), and inorganic salts ($CaCl_2$, $MgSO_4$, $KH_2PO_4$, $(NH_4)_2SO_4$, $FeSO_4$, and NaCl). Through one factor-at-a time experiment, lactose, yeast extract, and $CaCl_2$ were determined to be the best sources of carbon, nitrogen, and inorganic salt, respectively. The optimum composition was found to be 17.7 g/L lactose, 18.6 g/L yeast extract, and 0.9 g/L $CaCl_2$. Under these conditions, a maximum cell density of 9.33 Log CFU/mL was produced, similar to the predicted value.

• Journal of Surface Science and Engineering
• /
• v.46 no.5
• /
• pp.192-196
• /
• 2013

Stainless steels (AISI 316L) are carburized by Inductively coupled plasma using $CH_4$ and Ar gas. The ${\gamma}_c$ phase(S-phase) is formed on the surface of stainless steel after carburizing process. The XRD peak of carburized samples is shifted to lower diffracting angle due to lattice expansion. Overall, the thickness of ${\gamma}_c$ phase showed a linear dependence with respect to increasing temperature due to the faster rate of diffusion of carbon. However, at temperatures above 500, the thickness data deviated from the linear trend. It is expected that the deviation was caused from atomic diffusion as well as other reactions that occurred at high temperatures. The interfacial contact resistance (ICR) and corrosion resistance are measured in a simulated proton exchange membrane fuel cell (PEMFC) environment. The ICR value of the carburized samples decreased from 130 $m{\Omega}cm^2$ (AISI 316L) to about 20 $m{\Omega}cm^2$. The sample carburized at 200 showed the best corrosion current density (6 ${\mu}Acm^{-2}$).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.4
• /
• pp.507-511
• /
• 1999

The pharmacological effects of hydrocooked extracts of crucian carp have been investigated. All of the hydrocooked extracts showed the contractile effect on the isolated rat duodenum and decreased to a certain extent the normal blood pressure in anesthetized rat. The hydrocooked extracts also exhibited a dose-dependent relaxation on the isolated rat aorta precontracted with 50 mM KCl. All of these except for RM 60 fraction haying cytotoxic effect against MCF-7 human breast cancer cell showed neither antibacterial activity nor antitumor activity. In addition, we found that although body weight gain in the hydrocooked extracts treated group were all reduced significantly compared to control group, there were no significant changes in the hematological parameters, except that the levels of high-density lipoprotein was significantly increased. These results suggest that the hydrocooked extracts of crucian carp may contain a variety of bioactive materials.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.12
• /
• pp.1098-1103
• /
• 1994

Atomic force microscopy (AFM) images of two conducting layered transition-metal ditellurides, $TaTe_2$ and $Ta_{0.5}$$V_{0.5}$$Te_2$, were examined and their surface and bulk structural features were compared. All the measured unit cell parameters from AFM image were consistent and in complete agreement with the results of the X-ray diffraction. The microscopic structures of corrugated surface tellurium sheets were strongly affected by the modification of metal double zig-zag chains underneath Te surface. Large difference in the height amplitudes of AFM images in $TaTe_2$ and $Ta_{0.5}$$V_{0.5}$$Te_2$ phases was observed and this reflects large difference in the surface electron densities of two phases. On surface, the shorter intralayer Te…Te contacts in $TaTe_2$ induce more electron transfer from Te p-block bands to Ta d-block bands, thus electron density on surface observed in $TaTe_2$ is much lower than that of $Ta_{0.5}$$V_{0.5}$$Te_2$. However, in bulk, interlayer Te…Te contacts in V substituted phase are shorter than those in $TaTe_2$ phase, thus tellurium-to-metal electron transfer occurs more easily in $Ta_{0.5}$$V_{0.5}$$Te_2$ phase.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.5
• /
• pp.583-588
• /
• 1993

Encapsulation capacities $(V_{gas})$ of, $H_2,\;N_2,\;CO,\;CH_4$ and CO, for $Cs_{2.5}Na_{9.5}-A (C_s-A)$ and $Na_{12}$-A (Na-A) zeolites have been measured in order to understand the effect of molecular properties on the $V_{gas}$. With appropriate number of large blocking cations on the main windows of cavities in zeolite A, gas molecules can be encapsulated in both the ${\alpha}$ -and ${\beta}$-cages, resulting in much large $V_{gas}.\;V_{gas}$ is proportional to the encapsulation pressure (Pe) and is also dependent on the molecular properties of encapsulated gases themselves, especially on intermolecular forces originated from the quadrupole moments of molecules in the molecular-dimensioned cavities of zeolite A. At the low range of Pe, molecules with larger $V_{gas}$ and intermolecular forces apparently have smaller increasing tendencies of $V_{gas}$ upon increases in Pe, showing a linear relationship between the tendencies and intermolecular forces rather than their sizes. Interactions between encapsulated molecules of $CH_4$ and framework of Cs-A have been estimated and they seem to depend on the number of encapsulated molecules per unit cell. On the basis of calculated density of $CO_2$, presence of liquid-like phase for the encapsulated molecules in the molecular dimensioned cavities of zeolite A is postulated.

• Advances in materials Research
• /
• v.2 no.2
• /
• pp.119-131
• /
• 2013

Impedance and electrical conduction studies of $Ba(Nd_{1/2}Nb_{1/2})O_3$ ceramic prepared using conventional high temperature solid-state reaction technique are presented. The crystal symmetry, space group and unit cell dimensions were estimated using Rietveld analysis. X-ray diffraction analysis indicated the formation of a single-phase cubic structure with space group $Pm\bar{3}m$. Energy dispersive X-ray analysis and scanning electron microscopy studies were carried to study the quality and purity of compound. The circuit model fittings were carried out using the impedance data to find the correlation between the response of real system and idealized model electrical circuit. Complex impedance analyses suggested the dielectric relaxation to be of non-Debye type and negative temperature coefficient of resistance character. The correlated barrier hopping model was employed to successfully explain the mechanism of charge transport in $Ba(Nd_{1/2}Nb_{1/2})O_3$. The ac conductivity data were used to evaluate the density of states at Fermi level, minimum hopping length and apparent activation energy.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.5
• /
• pp.218-225
• /
• 2021

In this study, damping capacities were comparatively investigated for Mg-9%Al alloy with as-cast (AC) and fully discontinuous precipitates (DPs) microstructures, respectively. The DPs microstructure was obtained by solution treatment at 678 K for 24 h, followed by furnace cooling to RT. The AC microstructure was typically characterized by partially divorced eutectic β(Mg₁₇Al₁₂) phase particles distributed along the α-(Mg) matrix cell boundaries. The DPs microstructure showed lamellar morphology consisting of α and β thin layers with various interlamellar spacings. The DPs microstructure had better damping capacity than the AC microstructure in the strain-amplitude independent region, while in the strain-amplitude dependent region, the damping behavior was reversed. In view of the microstructural features of AC and DPs, the lower concentration of Al in the α-(Mg) phase for the DPs microstructure and the lower β phase number density for the AC microstructure would be responsible for the higher damping capacities in the strain-amplitude independent and strain-amplitude dependent regions, respectively.

• Food Engineering Progress
• /
• v.14 no.4
• /
• pp.354-358
• /
• 2010

The methods for determining the diffusion parameters for the diffusion of d-limonene, a major volatile compound of orange juice, through a multi-layered food packaging material and predicting its absorption into the packaging material have been investigated. The packaging material used was the 1.5-mm thick multi-layered packaging material composed of high impact polystyrene (HIPS), polyvinylidene chloride (PVDC), and low density polyethylene (LDPE). Orange juice was placed in a cell where volatiles were absorbed in the sample package and kept at $23{\pm}2^{\circ}C$ for 72 hr. The d-limonene absorbed in a 1.5-mm thick multi-layered food packaging material was analyzed by a solid phase micro-extraction (SPME). The absorption parameters for the absorption of d-limonene in the packaging material were determined and absorption of d-limonene into the packaging material was predicted using absorption storage data. The SPME desorption at $60^{\circ}C$ for 1 hr resulted in the most sensitive and reproducible results. The diffusion coefficients of d-limonene in the packaging material and the partition coefficient at $23{\pm}2^{\circ}C$ were approximately $1-2{\times}10^{12}m^2$/s and 0.03, respectively. The absorption profile no earlier than 30 hr was fit well by a model derived from the Fick's law.