• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.146-148
• /
• 2012

In our study, we have focused on optimizing good quality of ZnS buffer layer by chemical bath deposition (CBD) from a bath containing $ZnSO_4$, Thiourea and Ammonia in aqueous solution onto CIGS solar cells. The influence of deposition parameter such as pH, deposition temperature, stirring speed played a very important role on transmission, homogeneity, crystalline of ZnS buffer layer. The transmission spectrum showed a good transmission characteristic above 80% invisible spectral region. CIGS thin flim solar cell with ZnS buffer layer has been realized with the efficiency of 14.2%.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.152-153
• /
• 2006

The new approach to buffer layer design for CIGS solar cells that permitted to reduce the buffer absorption losses in the short wavelength range and to overcome the disadvantages inherent to Cd-free CIGS solar cells was proposed. A chemical bath deposition method has been used to produce a high duality buffer layer that comprises thin film of CdS and Zn-based film. The double layer was grown on either ITO or CIGS substrates and its morphological, structural and optical properties were characterized. The Zn-based film was described as the ternary compound $ZnS_x(OH)_y$. The composition of the $ZnS_x(OH)_y$ layer was not uniform throughout its thickness. $ZnS_x(OH)_y$/CdS/substrate region was a highly intermixed region with gradually changing composition. The short wavelength cut-off of double layer was shifted to shorter wavelength (400nm) compared to that (520 nm) for the standard CdS by optimization of the double buffer design. The results show the way to improve the light energy collection efficiency of the nearly cadmium-free CIGS-based solar cells.

• The KIPS Transactions:PartC
• /
• v.9C no.1
• /
• pp.73-78
• /
• 2002

In WATM networks, in order to perform dynamic slot allocation required slots of mobile terminals are estimated based on DP (Dynamic Parameter) reflecting characteristics of traffic. In VBR (Variable Bit Rate) traffic, slot allocation is done at MT considering both time-dependent characteristics and QoS (Quality of Service) requirements. In this paper, DPs-buffer state information and buffer state change-are transmitted through in-band signaling. BS (Base Station) performs dynamic slot allocation considering traffic characteristics of each MT (Mobile Terminal), in other words, buffer state information informs the potentiality of 'buffer full state'to BS if MT buffer is over the specific threshold value and buffer state change notifies change in buffer state of incoming cells to MT. If buffer state information is equal to 'low (more than threshold)' and 'abrupt increase' it generates 'buffer full' state cell transmission delay or cell loss might occur. At this time BS should assign additional slots to MT, and then MT consumes cells in its buffer. In simulation, the proposed scheme shows better performance in cell delay and loss than EPSA (Estimation-Prorated Slot Assignment) in-band scheme.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.1038-1045
• /
• 2001

The electrokinetic technology was applied in bioremediation for the purpose of supplying a Pseudomonas strain capable of degrading diesel to contaminated soil bed, and their biodegradation of diesel was carried out after a desired cell distribution was obtained. Electrokinetic injection of the strain was made possible because the cells acted as negatively charged particles at neutral pH, and thus the cells were transported with a precise directionality through the soil mostly by the mechanism of electrophoresis and in part by electroosmosis. A severe pH change in the soil bed was formed due to the penetration of electrolysis products, which was harmful to the cell viability and cell transport. To achieve a desirable cell transport and distribution, the control of pH in soil bed by a recirculating buffer solution in electrode chambers was essential during the appliation of an electric field. The judicious selections of electrolyte concentration and conductivity were also important for achieving an efficient electrokinetic cell transport since a higher electrolyte concentration favored the maintenance of pH stability in soil bed, but lowered electrophoretic mobility on the other hand. With electrolyte solution of pH 7 phosphate buffer, a 0.05 M concentration showed a better cell transport buffer, a 0.05 M concentration showed a better cell transport than 0.02 M and 0.08 M. The cell under pH 8 were obtained, compared to the cells under pH 7 or pH 9 in a given time period Up to $60\%$ of diesel was degraded in 8 days by the Pseudomonas cell, which were distributed electrokinetically under the conditions of pH 8 ($1,800{\mu}S/cm$, a mixture of phosphate and ammonia buffers) and 40 mA in a soil bed of 15 cm length.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.123-126
• /
• 2000

In this paper, we are proposed to pushing window input buffer A.T.M Switch that is not use memory read and write of general window police. Pushing window switch is superior to general window switch in performance but is large to general window switch in cross point number. Max throughput and Cell occupying probability results are verified by analysis an simulation. The evaluation of performance is max throughput and cell loss probability and mean queue length.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.94-97
• /
• 1999

In this paper, a new real-time neural network connection admission controller is proposed. The proposed controller measures traffic flows, cell loss rate and cell delay periodically each classes. The Neural network learns the relation between those measured information and service quality by real-time. Also the proposed controller uses the DWRR multiplexer with buffer dedicated to every traffic source in order to measure the delay that cells experience in buffer. Experimental result shows that the proposed method can control effectively heterogeneous traffic sources with diverse QoS requirement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.1
• /
• pp.73-82
• /
• 2004

As a new service category to better support TCP traffic in ATM networks, the Guaranteed Frame Rate (GFR) service category aims to support minimum cell rate guarantee, fairly distribute available bandwidth while keeping the simplicity of Unspecified Bit Rate (UBR). In this paper, we proposed a buffer management scheme which uses the per-VC accounting of single FWO queue and capable of supporting both GFR.1 and GFR.2 conformance definition. The proposed buffer management deal with GFR.1 and GFR.2 conformance definitions differentially by controlling the number of CLP=0 cell and CLP=1 cell which are occupying buffer space. The simulation results show that our proposed scheme satisfies the requirements of GFR services as well as improves total fairness index and each conformance definition fairness index.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.431-431
• /
• 2016

Typical Cu(In,Ga)Se2 (CIGS)-based solar cells have a buffer layer between CIGS absorber layer and transparent ZnO front electrode, which plays an important role in improving the cell performance. Among various buffer materials, chemical bath deposition (CBD)-ZnS is being steadily studied to alternative to conventional CdS and the efficiency of CBD-ZnS/CIGS solar cell shows the comparable values with that of CdS/CIGS solar cell. The intriguing thing is that reversible changes occur after exposure to illumination due to the metastable defect states in completed ZnS/CIGS solar cell, which induces an improvement of solar cell performance. Thus, it implies that the understanding of metastable defects in CBD-ZnS/CIGS solar cell is important issue. In this study, we fabricate the ITO/i-ZnO/CBD-ZnS/CIGS/Mo/SLG solar cells by controlling the NH4OH mole concentration (from 2 M to 3.5 M) of CBD-ZnS buffer layer and observe their conversion efficiency with and without light soaking for 1 hr. From the results, NH4OH mole concentration and light exposure can significantly affect the CBD-ZnS/CIGS solar cell performance. In order to investigate that which layer can contain metastable defect states to influence on solar cell performance, impedance spectroscopy and capacitance profiling technique with exposure to illumination have been applied to CBD-ZnS/CIGS solar cell. These techniques give a very useful information on the density of states within the bandgap of CIGS, free carriers density, and light-induced metastable effects. Here, we present the rearranged charge distribution after exposure to illumination and suggest the origin of the metastable defect states in CBD-ZnS/CIGS solar cell.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.283-286
• /
• 2000

One major drawback of conventional output buffered switches is that the speed of writing cells into output buffer should be N times faster than input link speed. This paper proposes a new output buffer switch that divides one output buffer into several buffers and virtually shares the divided buffers by using a distributor. The proposed switch makes it possible to reduce the memory speed. The proposed switch is evaluated in terms of the average cell latency compared with the input buffered switches which use the arbitration alogorithms, i.e., iSLIP or wrapped wave front arbiter(WWFA).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.399-402
• /
• 1998

Electroluminescent(EL) devices based on organic thin films have attracted lots of interests in large-area light-emitting display. One of the problems of such device is a lifetime, where a degradation of the cell is possibly due to an organic layers thickness, morphology and interface with electrode. In this study, light-omitting organic electroluminescent devices were fabricated using Alq$_3$(8-hydroxyquinolinate aluminum) and TPD(N,N'-diphenyl-N,N'-bis(3-methylphenyl(1-1\`-biphenyl]-4,4'-diamine). Where Alq$_3$ is an electron-transport and emissive layer, TPD is a hole-transport layer. The cell structure is ITO/TPD/Alq$_3$/Al and the cell is fabricated by vacuum evaporation method. In a measurement of current-voltage characteristics, we obtained a turn-on voltage at about 9 V. We also investigated stability of the devices using buffer layer with blend of PEI (Poly ether imide) and TPD by varying mot ratios between ITO and Alq$_3$. In current-voltage characteristics measurement, we obtained the turn-on voltage at about 6 V and observed an anomalous behavior at 3∼4 V. And we used other buffer layer of PEDT(3,4-pyrazino-3',4'-ethylenedithio-2,2',5,5'-tetrathiafulvalenium) with ITO/PEDT/TPD/Alq$_3$Al structure. We observed a surface morphology by AFM(Atomic Force Microscopy), UV/visible absorption spectrum, and PL(Photoluminescence) spectrum. We obtained the UV/visible absorption peak at 358nm in TPD and at 359nm in Alq$_3$, and the PL peaks at 410nm in TPD and at 510nm in Alq$_3$. We also studied EL spectrum in the cell structure of ITO/(TPD+PEI)/Alq$_3$/Al.