• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.140-151
• /
• 1996

In this study, we designed the routing structure and logic block of a SRAM cell-based FPGA with symmetrical-array architecture. The designed routing structure is composed of switch matrices, routing channels and I/O blocks, and the routing channels can be subdivided into single length channels, double length channels and global length channels. The interconnection between wires is made through SRAM cell-controlled pass transistors. To reduce the signal delay in pass transistors, we proposed a scheme raising the gate-control voltage to 7V. The designed SRAM cells have built-in shift register capability, so there is no need for separate shift registers. We designed SRAM cells in the LUTs(look-up tables) to enable the wirte operations to be performed synchronously with the clock for ease of system application. Each logic block (LFU) has four 4-input LUTs, flip-flops and other gates, and the LUTs can be used a sSRAM memory. The LFU also has a dedicated carry logic, so a 4-bit adder can be implemented in one LFU. We designed our FPGA using 0.6.mu.m CMOS technology, and simulation shows proper operation of a 4 bit counter at 100MHz.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.3
• /
• pp.305-313
• /
• 1999

To explore whether $Cl^-$ channel blockers interact with the ATP-sensitive $K^+\;(K_{ATP})$ channel, I have examined the effect of two common $Cl^-$ channel blockers on the $K_{ATP}$ channel activity in isolated rat ventricular myocytes using patch clamp techniques. In inside-out patches, 4,4'-diisothio-cyanatostilbene- 2,2'-disulfonic acid (DIDS) and niflumic acid applied to bath solution inhibited the $K_{ATP}$ channel activity in a concentration-dependent manner with $IC_{50}$ of 0.24 and 927 ${\mu}M,$ respectively. The inhibitory action of DIDS was irreversible whereas that of niflumic acid was reversible. Furthermore, DIDS-induced block was not recovered despite exposure to ATP (1 mM). In cell-attached and inside-out patches, DIDS blocked the pinacidil- or 2,4-dinitrophenol (DNP)-induced $K_{ATP}$ channel openings. In contrast, niflumic acid did not block the pinacidil-induced $K_{ATP}$ channel openings in inside-out patches, but inhibited it in cell-attached patches. DIDS and niflumic acid produced additional block in the presence of ATP and did not affect current-voltage relationship and channel kinetics. All these results indicate that DIDS among $Cl^-$ channel blockers specifically blocks the cardiac $K_{ATP}$ channel.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.509-518
• /
• 2023

In this paper, we designed a 4Kb poly-fuse OTP IP (Intellectual Property) required for analog circuit trimming and calibration. In order to reduce the BL resistance of the poly-fuse OTP cell, which consists of an NMOS select transistor and a poly-fuse link, the BL stacked metal 2 and metal 3. In order to reduce BL routing resistance, the 4Kb cells are divided into two sub-block cell arrays of 64 rows × 32 rows, with the BL drive circuit located between the two 2Kb sub-block cell arrays, which are split into top and bottom. On the other hand, in this paper, we propose a core circuit for an OTP cell that uses one poly-fuse link to one select transistor. In addition, in the early stages of OTP IP development, we proposed a data sensing circuit that considers the case where the resistance of the unprogrammed poly-fuse can be up to 5kΩ. It also reduces the current flowing through an unprogrammed poly-fuse link in read mode to 138㎂ or less. The poly-fuse OTP cell size designed with DB HiTek 90nm CMOS process is 11.43㎛ × 2.88㎛ (=32.9184㎛2), and the 4Kb poly-fuse OTP IP size is 432.442㎛ × 524.6㎛ (=0.227mm²).

• ETRI Journal
• /
• v.28 no.4
• /
• pp.506-508
• /
• 2006

A frequency selective surface (FSS), whose unit cell consists of a ternary tree loop loaded with a modified tripole, is proposed to block multiple frequency bands. Target frequency bands correspond to Korean personal communication services, cellular mobile communication, and 2.4 GHz industrial, scientific, and medical bands. Through the adjustment of inter-element and inter-unit cell gaps, and adjustment of the length of elements, we present an FSS design method that makes the precise tuning of multiple resonance frequencies possible. Additionally, to verify the validity of our approach, simulation results obtained from a commercial software tool and experimental data are also presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.611-617
• /
• 2000

Asynchronous mode W-CDMA system is kmown to be quite appropriate to the next generation mobile communication system, especially in a non-homogenious cellular architecture. In this case, however, each base station needs to use different spreading code for identification, so it is a demeanding task for a mobile terminal to find the best cell site and get an accurate code synchronization at the beginning of a communication. Since slow acquisition of a base station could mean the failure of initiation, a fast algorithm to accelerate the cell search process is essential. In this paper, a new cell search algorithm based on the binary code position modulation within the code block is proposed. Different cell sites are identified by different hopping code sequences, andeach position modulation is performed by the hopping code. The proposed algorithm is proved to make the cell search time in most places in a cell much shorter than the previous algorithms, and to make the receiver implementation simpler.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.111-111
• /
• 2012

In this talk, we represent a novel approach to investigating intra-nanorod surface plasmon coupling with control over block compositions. The multi-component rod-like nanostructures, which consist of optically active components (Au and Ag) and optically less active component (for example, Ni) in UV-vis-NIR spectral window, showed interesting optical response depending on each block length and the total length of the structure. By controlling the composition and relative lengths of the blocks that comprise these structures, we can tailor the overall optical properties. Depending on the relative fraction of Au and Ag blocks, the intensity of the transverse modes varied without noticeable peak shifts. However, the strong intraparticle surface plasmon coupling resulted in the collective appearance of longitudinal LSP modes, including higher-order modes. The experimental observations were confirmed by theoretical calculation, using a discrete dipole approximation method. In addition, we will briefly discuss how single nanorod solar cells can be synthesized by using by using electrochemical deposition and AAO hard templates.

• Journal of the Korean Home Economics Association
• /
• v.43 no.4 s.206
• /
• pp.141-159
• /
• 2005

The purpose of this study is to examine the effects of warning labels of consumption goods on consumer behavior and the consumers' evaluation in order to suggest a policy of warning labels and the Product Liability Law. The following items which are somewhat risky but are used in everyday the were selected: cup noodles, one-touch can foods, washing machine, microwave range, dry cell, hydro-oxygen detergent, baby-walker, and block-toys. Data were collected from 345 respondents by internet survey with the following results. (1) The average score of the effects of warning labels on consumer behavior was so low that warning labels are not considered effective, especially in block-toys, dry cell, and baby-walker. (2) Consumers' evaluation scores on the character size, design and sticking place of warning labels were very low. Therefore an effort to make warning labels more effective is needed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.8 no.3
• /
• pp.83-90
• /
• 1983

N-path SC tracking filter is studied beyond the audio frequency range. First, the SC filter Cell which would determine total SC filter characteristics is analyzed by the two methods, charge equation method and difference equation method. Second, 4-path and 8-path SC filter are presented, including only capacitors and switches. Then, 4-path and 8-path SC tracking filter are constructed by conisting of SC filter block and PLL block. In this experiment, maximum response shift is confirmed. With respect to the capacitor ratios and the number of path, Q and Gain(dB) is considered. Also tracking range is measured.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.9 no.6
• /
• pp.598-612
• /
• 2017

The recently developed Harmonic Polynomial Cell (HPC) method has been proved to be a promising choice for solving potential-flow Boundary Value Problem (BVP). In this paper, a flux method is proposed to consistently deal with the Neumann boundary condition of the original HPC method and enhance the accuracy. Moreover, fixed mesh algorithm with free surface immersed is developed to improve the computational efficiency. Finally, a two dimensional (2D) multi-block strategy coupling boundary-fitted mesh and fixed mesh is proposed. It limits the computational costs and preserves the accuracy. A fully nonlinear 2D numerical wave tank is developed using the improved HPC method as a verification.

• ETRI Journal
• /
• v.18 no.4
• /
• pp.229-244
• /
• 1997

Realization of the economical, reliable, and efficient ATM interface block becomes an important key to development of the ATM switching system when we consider new issues raised recently. In this paper, we summarize requirements for the ATM interface block and present the UNI (User Network Interface)/NNI (Network Node Interface) architecture to meet these requirements. We also evaluate the performance of the multiplexer adopting the various multiplexing schemes and service disciplines. For ATM UNI/NNI interface technologies, we have developed a new policing device using the priority encoding scheme. It can reduce the decision time for policing significantly. We have also designed a new spacer that can space out the clumped cell stream almost perfectly. This algorithm guarantees more than 99 % conformance to the negotiated peak cell rate. Finally, we propose the interface architecture for accommodation of the ABR (Available Bit Rate) transfer capability. The proposed structure that performs virtual source and virtual destination functions as well as a switch algorithm can efficiently accommodate the ABR service.