• Economic and Environmental Geology
• /
• v.16 no.4
• /
• pp.253-256
• /
• 1983

Recently, excavation of ancient pottery kiln of Koryo celadon of the Koryo dynasty have been continued since 1979 in Hang-dong, Daegu-myun, Gangjin-gun, Jeonnam Province, south-western part of Korea. The authers carried out an archeomagnetic study using the baked earth of the floors of the kiln, togimi and fabrics of rocks which were placed firmly on the floors of the kiln. These specimens were measured using the astatic magnetometer. The results of measurements are: declination, $0.3^{\circ}W$; inclination, $52.9^{\circ}C$. Referring to the secular change curves drawn from the studies of the south-western Japan, the last period when the pottery kiln was fired finally is estimated to be around A.D. 1170. Many potsherds of Koryo celadon were excavated around the kiln. According to the shape of these potsherds, the age of the pottery kiln is estimated to be 10-12 C, which is consisted with this study.

• Journal of Energy Engineering
• /
• v.28 no.2
• /
• pp.55-62
• /
• 2019

The purpose of this research is to find the optimum combustion conditions for the celadon using a gas kiln. It is clearly defined by the amount of CO gas in the kiln that it is fired in the commonly used oxidation and reduction atmosphere. As a result, while celadon was fired at $1250^{\circ}C$, oxidation happened when the amount of CO was 0~4,500 PPM, a neutral condition happened when the of CO was 4,500~25,000PPM and a reducing process was happened when the of CO was more that 25,000PPM. To reduce gas and firing time while keeping uniformly the firing temperature and firing condition of the gas kiln, you can partially block the gas corridor and adjust it as a damper. This adjustment reduces gas consumption by 40% and shortens the firing time by 1 hour.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.1
• /
• pp.208-223
• /
• 2023

This article was prepared for the purpose of reviewing maintenance plans and strategies for designating the celadon kiln site in Banam-ri, Gochang, a monument designated by the city and province as a historical site. Prior to the discussion, the high academic potential of this site, which is attracting attention as a main point of early celadon main point, was explained, and expectations for the future designation of the monument were reviewed. Next, the current status of preservation and maintenance plans of the celadon kiln site in Banam-ri, Gochang were examined. In particular, the current preservation situation was reviewed through an on-site survey on how the ruins, which have not been designated as a monument, should be maintained for historical designation in the future. Above all, it was argued that it was necessary to conduct excavation and literature surveys to clarify the characteristics of the ruins, investigate the surrounding areas, improve information facilities for visitors, and carry out promotion in connection with them. Finally, the definition of historical sites and the status of historical designation of ceramic kilns, along with the strategies necessary for designation, were presented. In particular, the examples of the existing historical designated celadon kiln site in Dotong-ri, Jinan, and Buncheong Kiln Site in Undae-ri, Goheung were reviewed, and three types of excavation surveys, literature surveys, and academic conferences were presented as the target directions for historical designation. The result of the excavation survey is the basis for suggesting that it has cultural property values with completeness, authenticity, and identity. The literature survey is the basis for supplementing the historical and cultural character of the remains that have not been revealed by excavation. The academic conference explained that it is an opportunity to understand the nature and value of cultural assets, such as the location of cultural assets, the status of relics, and events related to relics.

• Journal of Conservation Science
• /
• v.34 no.5
• /
• pp.345-358
• /
• 2018

The purpose of this study is to analyze the characteristics of low-grade 12th-century celadons, which were excavated from a kiln site in Noksan-dong, Busan. The physical and chemical properties of the body and the glaze are evaluated through scientific analyses. All the selected celadon shards have a similar body color, regardless of the kiln from which they originated. The celadon shards from 2 3 kilns are brighter than those from 4 5 kilns, and there are two saturations, namely gray and brown. The brightness of the glaze shows a high contribution of red and yellow. The porosity of the selected shards is 8.8% in the gray saturation and 16.1% in the brown saturation. The major chemical compositions of the body and glaze are in the typical chemical composition of the celadon, but the $TiO_2$ flux contents are different. The visible characteristic difference between the 2 3 kilns and the 4 5 kilns can be attributed to the mixing and the firing process rather than the raw materials used. The difference in the $Fe_2O_3$ and $K_2O$ flux between the 2 3 and 4 5 kilns can be attributed to changes in the ingredient combination during the process. In conclusion, Noksan-dong celadon could not be easier vitrification due to the manufacturing process that primary burning process, It is highly likely that there were process differences in kilns to produce high quality celadon.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.229-248
• /
• 2005

The purpose of this study is to identify the best firing condition for Celadon, which is one of the famous traditional pottery to represent Korean culture, by minimizing energy consumption, cutting firing time, shortening the time of processing ceramic making, in order to, save energy as well as to protect the potters' health. Most Korean potter starts their reduction from $950^{\circ}C$ to change kiln atmosphere. However on this study, reduction have started from $950^{\circ}C\;to\;1200^{\circ}C$ by increasing $50^{\circ}C$ at a time. Then the results are analyzed to be compared to previous Celadon, in colors, chroma, and brightness. As a results, it is found, that the best temperature for starting reduction is $1100^{\circ}C$, when chroma and brightness values to meet same with previous celadon. Therefore the best condition could be made by starting the reduction on $1100^{\circ}C$ to fire celadon, which would have shorten 2 hours of firing process and, at the same time, it could have saved the energy by 12%.

• Journal of the Korean Ceramic Society
• /
• v.52 no.1
• /
• pp.41-47
• /
• 2015

Celadon shards from Gangjin and Buan were analyzed for their color, chemistry and microstructures. They exhibited similar chromatic characteristics in a $CIEL^*a^*b^*$ analysis. All of the glazes assessed showed comparable compositional areas, while the bodies from Gangjin shards had higher $RO_2$ concentrations. A high degree of similarity was also noted in the microstructures of the glaze and bodies from both regions. Anorthite crystals appeared in the glaze layer, and phase separation behavior developed around these crystals. This may have been caused by the glaze chemistry and the sintering process given the lengthy heating and cooling time. A Raman analysis indicated higher isolated $SiO_4$ unit ($Q_0$) values for the Buan samples. This can stem from the higher firing temperature or the longer sintering process.

• Journal of Conservation Science
• /
• v.36 no.2
• /
• pp.112-122
• /
• 2020

The purpose of this study was to find out the correlation through comparative analysis of used materials and manufacturing techniques such as firing characteristics for sherds excavated from celadon kiln site in Punggil-ri, Jangheung. The color difference of the sherds was very wide, and even in the microstructure of the cross section of the glaze layer and the body layer, the celadons, whitewares, blackware, and stonewares could not be characterized because they did not show distinct differences from each other. As a result of estimating the firing temperature through the analysis of constituent minerals and thermal analysis, most of them were estimated to have been fired at 1000℃, but some were fired at high temperatures above 1200℃. It was difficult to clearly distinguish between celadon and whiteware even in the major compositional content of bodies. In the statistical analysis, glaze could be classified three group according to the type of sherds, but the bodies of celadons, whitewares, and blackware classified into one similar group. It is considered that it is not more likely differences in raw materials but some ingredients were removed or added during the purification process. Conclusionally, in this kiln site was found through scientific analysis that there were technical attempts to produce various ceramics, and that the manufacturing techniques and materials of ceramics were in an early stage that was not stabilized.

• Conservation and Restoration of Cultural Heritage
• /
• v.1 no.1
• /
• pp.39-48
• /
• 2012

The first twenty-five years of scientific study within Korea on Korean traditional ceramics has been characterized as a bridging effort to understand the rich field of artistic ceramic masterpieces on one hand with analytic results gained from mounds of broken shards and kiln wastes on the other. First shard pieces were collected directly from the waste mounds, but most of the analyzed shards were provided by art historians and museum staffs directly involved in systematic excavations. The scientific study is viewed as one of many complimentary ways in learning about the multi-faceted ceramics culture, ultimately connecting human spirits and endeavors from the past to the present to the future. About 1350 pieces of analyzed shards have been so far collected and organized according to the production location and time period. From the experimental results of the analysis, the compositional and microstructural characteristics of bodies and glazes have been deduced for many kiln sites of Goryeo and Joseon dynasties. Except for a few local kilns, porcelain stone was used as body material in both dynasties. The principle of mixing a clay component with a flux material was used in Korean glazes as was in China. The clay component different from body clay was often used early on. In Gangjin a porcelain material appropriate for whiteware body was mixed for celadon glaze, and in Joseon Gwangju kilns glaze stone was chief clay material. The use of wood ash persisted in Korea even in making buncheong glazes, but in Joseon whitewares burnt lime and eventually crushed lime were used as flux material.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.38-63
• /
• 2017

This study sets out to investigate the installation of royal kilns and its impact on local kilns, taking note of celadon vase with inlaid cloud pattern in Joseon Dynasty. For that purpose, it determined the kilns and period to produce celadon vases with inlaid cloud pattern, and compared them with the pattern, design, and deformity of the celadon vases produced in the royal kilns in the 15th centuries. The celadon vase with inlaid cloud pattern was superior in quality than the porcelain for tribute ware manufactured together in Jeolla Province before the installation of royal kilns. And then a majority of sagijangs at local kiln had difficult time securing enough supply of manpower and resources, and discontinued manufacturing the celadon vase with inlaid cloud pattern. En revanche, celadon vases with inlaid cloud pattern produced from specially fixed royal kilns reflected the local sagijang's skill. Local kilns were strongly influenced by the installation of royal kilns. Those could not freely use high-quality white clay, limited to the market. Besides, most of the skillful sagijangs were assigned to royal kilns. Celadon vases with inlaid cloud pattern can be used as evidence to show that the manufacturing technique was transferred from local kilns to the royal kilns as well as to show that their production in royal kilns soon became stabilized.

• Journal of the Korean Ceramic Society
• /
• v.49 no.1
• /
• pp.66-71
• /
• 2012

In ancient Goryeo celadon, the effect of the chemical composition and ionic state of Fe on the color was evaluated by Mossbauer spectroscopy and Design of Experiment (DOE) analysis. The ancient celadon pieces excavated from the kiln sites in GangJin and Buan areas were analyzed by Mssbauer spectroscopy, chromaticity, and DOE analysis. The color of celadon was found to be mainly determined by that of glaze since variations of $L^*$, $a^*$, and $b^*$ values for the body were much smaller than those for the glaze. As $Fe^{2+}$/$Fe^{3+}$ in glaze increases, $L^*$ value increases, whereas $a^*$/$b^*$ value decreases, which is well consistent with the result on the synthetic glaze. As the amount of titanium increases in the glaze, the $a^*$ and $b^*$ values decrease; on the other hand, the $L^*$ value increases, which is well consistent with the result on the synthetic glaze.