• 제목/요약/키워드: Celadon kiln

검색결과 22건 처리시간 0.025초

사적(史蹟)68호(號) 고려청자도요지(高麗靑瓷陶窯址)의 고고지자기(考古地磁氣) (Archeomagnetism of the Pottery of Koryo Celadon, the Historic site No. 68)

  • 김광호;배영부
    • 자원환경지질
    • /
    • 제16권4호
    • /
    • pp.253-256
    • /
    • 1983
  • Recently, excavation of ancient pottery kiln of Koryo celadon of the Koryo dynasty have been continued since 1979 in Hang-dong, Daegu-myun, Gangjin-gun, Jeonnam Province, south-western part of Korea. The authers carried out an archeomagnetic study using the baked earth of the floors of the kiln, togimi and fabrics of rocks which were placed firmly on the floors of the kiln. These specimens were measured using the astatic magnetometer. The results of measurements are: declination, $0.3^{\circ}W$; inclination, $52.9^{\circ}C$. Referring to the secular change curves drawn from the studies of the south-western Japan, the last period when the pottery kiln was fired finally is estimated to be around A.D. 1170. Many potsherds of Koryo celadon were excavated around the kiln. According to the shape of these potsherds, the age of the pottery kiln is estimated to be 10-12 C, which is consisted with this study.

  • PDF

가스가마를 사용한 최적의 청자 소성방법 연구 (Optimal firing method of the Celadon using gas kiln)

  • 김상곤
    • 에너지공학
    • /
    • 제28권2호
    • /
    • pp.55-62
    • /
    • 2019
  • 본 연구는 가스가마를 사용하여 청자를 소성 할 경우 최적의 소성조건을 구하고자 하였다. 특히 환원분위기와 산화 분위기 등의 소성분위기를 가마내의 CO 농도로 명확하게 정의하였다. $1250^{\circ}C$로 청자유약을 소성한 경우, 가마 안의 일산화탄소 양이 0~4,500PPM에서는 산화 4,500~25,000PPM에서는 중성, 25,000PPM 이상에서는 환원분위기가 됨을 관찰 할 수 있었다. 가스 가마 안의 소성분위기와 소성온도를 균일하게 하면서 가스소모량과 소성시간을 줄이기 위해서는 가마 안의 연돌을 일부 막은 후 댐퍼로 조절하면 된다. 이와 같은 조절방법으로 가스량은 40%, 소성시간은 1시간을 절약할 수 있다.

고창 반암리 청자요지의 보존 방안과 사적 지정 전략 (Conservation Plan and Historic Site Designation Strategy of Celadon Kiln Site in Banam-ri, Gochang)

  • 신민철
    • 헤리티지:역사와 과학
    • /
    • 제56권1호
    • /
    • pp.208-223
    • /
    • 2023
  • 본 글은 시도지정기념물 고창 반암리 청자요지를 사적으로 지정하기 위한 정비 방안과 전략을 검토하기 위한 목적으로 작성되었다. 본격적 논의에 앞서 초기 청자요지로 주목받고 있는 이 유적의 높은 학술적 잠재력을 설명하면서 기념물 지정으로 인해 추진될 예산 확보, 향후 사적 지정에 대한 기대까지 검토하였다. 다음으로 고창 반암리 청자요지의 보존 현황과 정비 방안을 살펴보았다. 특히 기념물로 지정된 지 1년이 되지 않은 이 유적이 향후 사적 지정을 위한 정비를 어떠한 방향으로 수행해야 할지에 대해 현지 조사 등으로 현재의 보존상황을 검토하였다. 무엇보다 유적의 명확한 성격을 밝히기 위한 발굴조사와 문헌조사를 시행하고, 현지 조사를 토대로 관람객들을 위한 안내시설을 정비하고 이와 연계한 홍보를 수행할 필요가 있음을 주장하였다. 마지막으로 사적의 정의 및 도자기 가마의 사적 지정 현황과 함께 지정에 필요한 전략을 제시하였다. 특히 기존 사적 지정된 진안 도통리 청자요지, 고흥 운대리 분청사기요지의 사례를 검토하여 발굴조사, 문헌조사, 학술대회의 세 가지를 사적 지정의 목표 방향으로 제시하였다. 발굴조사의 결과는 완전성, 진정성, 정체성을 두루 갖춘 문화재적 가치를 가지고 있다는 것을 제시하는 근거가 된다. 문헌조사는 발굴로 밝혀지지 않은 유구의 역사적·문화적 성격을 보완하는 근거가 된다. 학술대회는 문화재가 가진 위치성과 유적의 위상, 유적과 관계 있는 사건 등 문화재의 본질과 가치를 이해할 수 있는 계기가 된다는 것을 설명하였다.

부산 녹산동 조질청자의 고고화학적 분석 (An Analysis of Archaeological Chemistry on the Low-grade Celadons Excavated at Noksan dong, Busan in Korea)

  • 남경민;김규호
    • 보존과학회지
    • /
    • 제34권5호
    • /
    • pp.345-358
    • /
    • 2018
  • 부산 녹산동 가마터에서 출토된 12세기 조질청자를 중심으로 가마터 4기에서 출토된 35점을 분석 시료로 선정하고 색도, 비중 및 흡수율, 미세구조 관찰과 태토와 유약의 조성을 분석하였다. 청자의 태토 색도는 가마에 상관없이 모두 비슷했으며 4 5호 가마 출토 선정 도편은 2 3호보다 명도가 어둡고, 채도는 회색계와 갈색계로 구분된다. 유약은 적색과 황색의 기여도가 높은 편이다. 선정된 도편의 기공률은 회색계 8.8%이고 갈색계 16.1%로 태토 색상에 따라 차이를 보인다. 태토와 유약의 주성분은 청자의 전형적인 성분 범주에 속하지만 $TiO_2$의 함량이 차이가 있다. 2 3호 가마와 4 5호 가마 청자의 가시적 차이는 사용 원료보다 수비 및 번조공정에 따른 것으로 볼 수 있으며 $Fe_2O_3$$K_2O$의 함량 차이는 공정 과정에서 배합기술의 변화를 시도한 결과로 볼 수 있다. 결론적으로 녹산동 청자는 초벌과정 없이 태토에 유약을 바른 후 한 번에 구웠던 제작 공정으로 인하여 태토가 충분히 자화되지 못했으므로 양질의 청자를 제작하기 위하여 가마별로 공정 차이가 있었을 가능성이 높다고 생각된다.

제조신뢰성 확보를 위한 청자의 소성조건 분석에 관한 연구 (A Study on Fireing condition analysis of celadon porcelain for reliability manufacturing)

  • 이철중;이병기;강경식;이병하
    • 대한안전경영과학회지
    • /
    • 제7권4호
    • /
    • pp.229-248
    • /
    • 2005
  • The purpose of this study is to identify the best firing condition for Celadon, which is one of the famous traditional pottery to represent Korean culture, by minimizing energy consumption, cutting firing time, shortening the time of processing ceramic making, in order to, save energy as well as to protect the potters' health. Most Korean potter starts their reduction from $950^{\circ}C$ to change kiln atmosphere. However on this study, reduction have started from $950^{\circ}C\;to\;1200^{\circ}C$ by increasing $50^{\circ}C$ at a time. Then the results are analyzed to be compared to previous Celadon, in colors, chroma, and brightness. As a results, it is found, that the best temperature for starting reduction is $1100^{\circ}C$, when chroma and brightness values to meet same with previous celadon. Therefore the best condition could be made by starting the reduction on $1100^{\circ}C$ to fire celadon, which would have shorten 2 hours of firing process and, at the same time, it could have saved the energy by 12%.

강진과 부안 청자 도편의 비교연구 (Comparative Study of Celadon Shards from Gangjin and Buan Kiln Sites)

  • 노형구;김수민;김응수;조우석;한정화
    • 한국세라믹학회지
    • /
    • 제52권1호
    • /
    • pp.41-47
    • /
    • 2015
  • Celadon shards from Gangjin and Buan were analyzed for their color, chemistry and microstructures. They exhibited similar chromatic characteristics in a $CIEL^*a^*b^*$ analysis. All of the glazes assessed showed comparable compositional areas, while the bodies from Gangjin shards had higher $RO_2$ concentrations. A high degree of similarity was also noted in the microstructures of the glaze and bodies from both regions. Anorthite crystals appeared in the glaze layer, and phase separation behavior developed around these crystals. This may have been caused by the glaze chemistry and the sintering process given the lengthy heating and cooling time. A Raman analysis indicated higher isolated $SiO_4$ unit ($Q_0$) values for the Buan samples. This can stem from the higher firing temperature or the longer sintering process.

장흥 풍길리 청자요지 출토 도자기들의 소성특성 및 재료학적 상관성 비교 연구 (Scientific Comparison Study on Characteristics of Firing and Making Materials for Sherds Excavated from Celadon Kiln Site of Punggil-ri, Jangheung)

  • 한민수;이장존
    • 보존과학회지
    • /
    • 제36권2호
    • /
    • pp.112-122
    • /
    • 2020
  • 본 연구는 장흥 풍길리 출토 도자기들의 소성특성 등 제작기술과 재료학적 비교 분석을 통해 상관성을 밝혀내고자 하였다. 색차 분석결과 넓은 영역에서 분포하였으며, 유약층과 태토층의 단면 미세조직에서도 청자와 백자, 흑유자기, 도기편들이 서로 특징적인 차이를 보이지 않았다. 구성광물과 열분석을 통해 소성온도를 추정한 결과, 대부분 1100℃에서 소성된 도편과 일부는 1200℃ 이상의 고온 소성된 도편들도 있었다. 태토의 주요성분분 함량에서도 청자와 백자의 명확한 구분이 어려웠으며, 통계분석에서도 유약은 도자기의 종류에 따라 3개의 그룹으로 분류할 수 있으나 태토는 청자와 백자, 흑유자기가 유사한 1개의 그룹으로 분류된다. 이는 원재료의 차이라기 보다는 수비와 같은 정선과정에서 일부 성분이 제거되거나 첨가되었을 가능성이 높다. 따라서 다양한 도자기를 제작하고자 하는 기술적인 시도가 있었고, 도자기의 제작 기술과 재료가 안정화되지 않은 초기 단계였음을 과학적 분석을 통해 알 수 있었다.

A Quarter Century of Scientific Study on Korean Traditional Ceramics Culture: From Mounds of Waste Shards to Masterpieces of Bisaek Celadon

  • Choo, Carolyn Kyongshin Koh
    • Conservation and Restoration of Cultural Heritage
    • /
    • 제1권1호
    • /
    • pp.39-48
    • /
    • 2012
  • The first twenty-five years of scientific study within Korea on Korean traditional ceramics has been characterized as a bridging effort to understand the rich field of artistic ceramic masterpieces on one hand with analytic results gained from mounds of broken shards and kiln wastes on the other. First shard pieces were collected directly from the waste mounds, but most of the analyzed shards were provided by art historians and museum staffs directly involved in systematic excavations. The scientific study is viewed as one of many complimentary ways in learning about the multi-faceted ceramics culture, ultimately connecting human spirits and endeavors from the past to the present to the future. About 1350 pieces of analyzed shards have been so far collected and organized according to the production location and time period. From the experimental results of the analysis, the compositional and microstructural characteristics of bodies and glazes have been deduced for many kiln sites of Goryeo and Joseon dynasties. Except for a few local kilns, porcelain stone was used as body material in both dynasties. The principle of mixing a clay component with a flux material was used in Korean glazes as was in China. The clay component different from body clay was often used early on. In Gangjin a porcelain material appropriate for whiteware body was mixed for celadon glaze, and in Joseon Gwangju kilns glaze stone was chief clay material. The use of wood ash persisted in Korea even in making buncheong glazes, but in Joseon whitewares burnt lime and eventually crushed lime were used as flux material.

음각운문청자의 제작현황으로 본 조선시대 관요의 설치와 지방 가마 (The Installation of Royal Kilns in Joseon Dynasty and Its Impact on Local Kilns)

  • 오영인
    • 헤리티지:역사와 과학
    • /
    • 제50권4호
    • /
    • pp.38-63
    • /
    • 2017
  • 본 논문은 조선시대 음각운문청자의 제작 추이에 주목하여 관요 운영이 지방 가마에 미친 영향과 그 결과에 대해 구체적인 규명을 시도한 글이다. 이를 위해 음각운문청자가 제작된 가마와 제작시기를 밝히고, 15세기 관요에서 제작된 청자의 문양을 확인하는 동시에 관요가 설치 운영된 이후 지방에서 자기가 제작된 양상을 살펴보았다. 음각운문청자는 관요가 운영되기 이전 전라도 일대에서 공물자기와 함께 제작되던 청자였다. 동일 가마에서 제작된 여타의 자기에 비해 태토의 발색이 밝고 정제수준이 높았으며 시유상태와 유조가 고른 양질 자기였다. 더욱이 음각운문청자에 일정한 규격과 위치로 시문된 문양은 고려청자의 운문과 조선시대 공예품의 운문이 독창적으로 반영된 특징을 보였다. 특히 음각운문청자는 관요가 설치되기 이전에 각 지역별로 다양한 공예적 특징을 보일 수 있었던 시대적 배경을 바탕으로 지역색이 뚜렷하게 반영된 자기였다. 지방 가마는 관요의 설치와 운영으로 인해 많은 영향을 받았다. 양질 백토를 사용하는데 제약을 받았고, 자기 공급처의 변경에 따라 왕실과 중앙 관청이 아닌 지방 관아나 민가에서 사용할 자기를 제작해야했다. 뿐만 아니라 기술력이 뛰어난 사기장의 대다수는 관요로 차출되어 지방의 자기 제작에 큰 타격을 끼쳤다. 그 결과 관요가 운영된 이후 지방 가마의 대다수는 인력과 자원확보에 어려움을 겪었고, 음각운문청자 역시 전라도 일대 가마에서 더 이상 제작되지 않았다. 반면에 관요에서는 지방 사기장 기술력의 이전에 따라 음각 운문청자가 일시적으로 제작되는 양상을 보였다. 즉, 음각운문청자는 관요로 차출된 전라도 사기장의 기술력이 관요에 투영된 증거인 동시에 관요 자기의 제작이 이내 안정되었음을 보여주는 단서로 그 의미를 찾을 수 있다.

뫼스바우어 분광법과 색도 분석에 의한 고대 고려청자의 발색메카니즘 연구 (Systematic Study on Colorative Mechanism of Ancient Goryeo Celadon Glaze by Mossbauer Spectroscopy and Chromaticity Analysis)

  • 전아영;노형구;김응수;조우석;김경자;김종영;김진모;김철성;강경인
    • 한국세라믹학회지
    • /
    • 제49권1호
    • /
    • pp.66-71
    • /
    • 2012
  • In ancient Goryeo celadon, the effect of the chemical composition and ionic state of Fe on the color was evaluated by Mossbauer spectroscopy and Design of Experiment (DOE) analysis. The ancient celadon pieces excavated from the kiln sites in GangJin and Buan areas were analyzed by Mssbauer spectroscopy, chromaticity, and DOE analysis. The color of celadon was found to be mainly determined by that of glaze since variations of $L^*$, $a^*$, and $b^*$ values for the body were much smaller than those for the glaze. As $Fe^{2+}$/$Fe^{3+}$ in glaze increases, $L^*$ value increases, whereas $a^*$/$b^*$ value decreases, which is well consistent with the result on the synthetic glaze. As the amount of titanium increases in the glaze, the $a^*$ and $b^*$ values decrease; on the other hand, the $L^*$ value increases, which is well consistent with the result on the synthetic glaze.