• Journal of Radiation Protection and Research
• /
• v.17 no.1
• /
• pp.11-19
• /
• 1992

To find out an effective way of treating the toxicity of cadmium, concentrations of $K^+,\;Ca^{2+}$ and c-AMP, and activities of GOT and GPT in blood of rats were determined at definite time intervals after administration of cadmium to rats. Cadmium caused more decrease of $Ca^{2+}$ concentration than $K^+$ concentration but increases of GOT and GPT activities and of c-AMP concentrations. The decreased concentration of $Ca^{2+}$ was not recovered by selenium or metallothionein. However, the increased activities of GOT and GPT, and the c-AMP concentration were down regulated remarkably by selenium but not by metallothionein. These results suggested that selenium might have the compensate effects concerning toxic index against cadmium such as increases of GOT and GPT activities, and of c-AMP concentration.

• The Korea Journal of Herbology
• /
• v.36 no.1
• /
• pp.41-49
• /
• 2021

Objective : Citrus unshiu peel (Citri Unshius Pericarpium) has been prescribed to suppress coughing and phlegm in Korean medicine. In this study, the effect of ethanol extract of Citrus unshiu peel (CEE) on apoptosis was investigated using cadmium chloride (CdCl2) treated HepG2 cells. Methods : CEE was prepared by extracting 300 g of Citri Unshius Pericarpium in 3 L of ethanol for 72 h. Apoptosis was determined by the TUNEL assay. The mitochondrial membrane potential (MMP) was monitored using the membrane-permeable fluorescent dye Rh123. The expression level of each protein was monitored by Western blot analysis. Results : CEE protected HepG2 cells from apoptosis as determined by the TUNEL assay. A decrease in MMP was observed in cells exposed to cadmium, indicating that mitochondria are involved in the induction of apoptosis. However, CEE recovered the reduction in MMP caused by cadmium. In addition, decreased expression of B-cell lymphoma 2 (Bcl-2), procaspase, and poly(ADP-ribose) polymerase (PARP) by cadmium was increased by CEE. The anti-apoptotic effect of CEE was found to be associated with inhibition of JNK and p38 phosphorylation when examining the expression of phosphorylated MAPK by Western blot. Conclusion : This study showed that CEE exerted anti-apoptotic effects in cadmium-induced HepG2 cells by inhibiting the reduction of MMP and changes in the expression level of apoptotic proteins. These results suggest the potential for CEE to be used for heavy metal-induced liver damage.

• Korean Journal of Remote Sensing
• /
• v.14 no.1
• /
• pp.53-68
• /
• 1998

Observation of hydrometeors' behavior in the atmosphere is important to understand weather and climate. By conventional observations, we can get the distribution of water vapor at limited number of points on the earth. In this study, the precipitable water has been estimated from the split window channel data on GMS-5 based upon the technique developed by Chesters et al.(1983). To retrieve the precipitable water, water vapor absorption parameter depending on filter function of sensor has been derived using the regression analysis between the split window channel data and the radiosonde data observed at Osan, Pohang, Kwangiu and Cheju staions for 4 months. The air temperature of 700 hPa from the Global Spectral Model of Korea Meteorological Administration (GSM/KMA) has been used as mean air temperature for single layer radiation model. The retrieved precipitable water for the period from August 1996 through December 1996 are compared to radiosonde data. It is shown that the root mean square differences between radiosonde observations and the GMS-5 retrievals range from 0.65 g/$cm^2$ to 1.09 g/$cm^2$ with correlation coefficient of 0.46 on hourly basis. The monthly distribution of precipitable water from GMS-5 shows almost good representation in large scale. Precipitable water is produced 4 times a day at Korea Meteorological Administration in the form of grid point data with 0.5 degree lat./lon. resolution. The data can be used in the objective analysis for numerical weather prediction and to increase the accuracy of humidity analysis especially under clear sky condition. And also, the data is a useful complement to existing data set for climatological research. But it is necessary to get higher correlation between radiosonde observations and the GMS-5 retrievals for operational applications.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.2
• /
• pp.108-121
• /
• 2009

The suspended particulate matters have been collected on membrane filters and glass fiber filters by an 8-stage cascade impactor for 2 years (Sep. 2005${\sim}$Sep. 2007) in Kyung Hee University-Global Campus located on the border of Yongin and Suwon. The 20 chemical species (Al, Mn, Si, Fe, Cu, Pb, Cr, Ni, V, Cd, Ba, $Na^+$, ${NH_4}^+$, $K^+$, $Mg^{2+}$, $Ca^{2+}$, $Cl^-$, ${NO_3}^-$, and ${SO_4}^{2-}$) were analyzed by an ICP-AES and an IC after performing proper pre-treatments of each sample filter. Based on these chemical information, the PMF receptor model was applied to identify the source of ambient size-by-size particulate matters. The receptor modeling is the one of the statistical methods to achieve resonable air pollution management strategies. A total of 10 sources was identified in 9 size-ranges such as long-range transport, secondary aerosol, $NH_{4}NO_{3}$ related source, coal combustion, sea-salt, soil, oil combustion, auto emission, incineration, and biomass burning. Especially, the secondary aerosol source assorted in fine and coarse modes was intensively studied.

• Analytical Science and Technology
• /
• v.17 no.3
• /
• pp.199-210
• /
• 2004

A new polystyrene-divinylbenzene chelating resin containing 4,5-dihydroxy-naphthalene-2,7-disulfonic acid (chromotropic acid : CTA) as functional group has been synthesized and characterized. The sorption and desorption properties of this chelating resin for Cr(III) ion and Cr(VI) ion including nine metal bloodstain. As a results, FOB test kit could be effectively applied to identification of human blood at chelating resin was stable in acidic and alkaline solution. The Cr(VI) ion is selectively separated from Cr (III) ion at pH 2 and the maximum sorption capacity of Cr(VI) ion is 1.2 mmol/g. In the presence of anions such as $F^-$, $SO{_4}^{2-}$, $CN^-$, $CH_3COO^-$, $NO{_3}^-$, the sorption of Cr(VI) ion was reduced but anions such as $PO{_4}^{3-}$ and $Cl^-$ revealed no interference effect. The elution order of metal ions obtained from breakthrough capacity and overall capacity at pH 2 was Cr(VI)>Sn(II)>Fe(III)>Cu(II)>Cd(II)${\simeq}Pb(II){\simeq}Cr(III){\simeq}Mn(II){\simeq}Ni(II){\simeq}Al(III)$. Desorption characteristics for Cr(VI) ion was investigated with desorption agents such as $HNO_3$, HCl, and $H_2SO_4$. It was found that the ion showed high desorption efficiency with 3 M HCl. As the result, the chelating resin, XAD-16-CTA was successfully applied to separation and preconcentration of Cr (VI) ion from several metal ions in metal finishing works.

• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.185-190
• /
• 2001

Alginate, a well-known biopolymer, is universally applied for immobilization of microbial cells. Biosorption characteristics of lead by waste biomass of immobilized A. niger beads, used in fermentation industries to produce citric acid, were studied. The immobilized A. niger beads, prepared via capillary extrusion method using calcium chloride, were applied in the removal of lead. Pb uptake was the highest in A. niger beads cells grown for 3 days with medium producing citric acid (12% sucrose, 0.5% $NH_4NO_3$, 0.1% $KH_2PO_4$, and 0.025% $MgSO_4$). Lead uptake by the immobilized A. niger beads and free A. niger mycellia beads increased sharply with time. However, while uptake by the immobilized A. niger beads continued to increase slowly, that by free A. niger mycellia beads stopped after 30 min. The optimum pH and temperature of lead uptake were found to be 6 and $35^{\circ}C$, respectively. The maximum uptake of lead was achieved with $50{\sim}100$ beads and 50 ml lead solution in a 250-ml Erlenmeyer flask, while, at over 100 beads, uptake of the lead decreased. The order of biosorption capacity for heavy metals was Pb>Cu>Cd. Pb uptake capacity of the immobilized A. niger beads treated with 0.1 M $CaCI_2$, 0.1 M NaOH, and 0.1 M KOH decreased compared to the untreated beads. On testing the desorption of Pb from the immobilized A. niger beads, re-uptake of Pb was found possible after desorption of the binding metal with 0.1 M HCI.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.201-210
• /
• 2000

Rock bridge in rock masses can be considered as one of several types of opening-mode fractures, and also it has been known to have a great influence on the stability of structures in rock mats. In the beginning of researching a rock bridge it used to be studied only in characteristics of its behavior, as considering resistance of material itself. However the distribution pattern of rock bridges, which can affect the stability of rock structures, is currently researched with a fracture mechanical approach in numerical studies. For investigating the effect of rock bridges on the development pattern of hydraulic fractures, the author analyzed numerically the stress state transition in rock bridges and their phenomena with a different pattern of the rock bridge distributons. From the numerical studies, a two-crack configuration could be defined to be representative of the most critical conditions for rock bridges, only when cracks are systematic and same in their length and angle. Moreover, coalescence stresses and onset of propagation stresses could be known to increase with decreasing s/L ratio or increasing d/L ratio. The effect of pre-existing crack on hydraulic fracturing was studied also in numerical models. Different to the simple hydraulic fracturing modeling in which the fractures propagated exactly parallel to the maximum remote stress, the hydraulic fractures with pre-existing cracks dial not propagate parallel to the maximum remote stress direction. These are representative of the tendency to change the hydraulic fractures direction because of the existence of pre-existing crack. Therefore s/L, d/L ratios will be identical as a function effective on hydraulic fractures propagation, that is, the $K_{I}$ vague increase with decreasing s/L ratio or increasing d/L ratio and its magnification from onset to propagation increases with decreasing s/L ratio. The scanline is a commonly used method to estimate the fracture distribution on outcrops. The data obtained from the scanline method can be applied to the evaluation of stress field in rock mass.s.

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.3
• /
• pp.111-122
• /
• 2009

Cadmium (Cd) is known to exert gonadotoxic and spermiotoxic effects. The present study was performed to investigate the morphological effects and metallothionein (MT) expression by zinc pretreatment in the course of time of cadmium-induced testicular injury in rat. Fifty male Spraque-Dawley rats weighing 160~180 g were divided into two groups : saline-pretreated cadmium group and zinc-pretreated cadmium group. Rats of two groups received subcutaneous injection of saline and 100 mg/kg $ZnSO_4$ at 0, 2, 5 and 8 hrs intervals respectively. Cadmium chloride (4.5 mg/kg $CdCl_2$) was administrated intraperitoneally at 2 hrs after zinc injection and rats were killed 0, 12, 24, 48 and 72 hrs later. Testicular tissue damages, interstitial (Leydig) cells status and MT expression were determined using hematoxylin-eosin stained sections and a computerized image analysis system on sections immunostained with a mouse anti-metallothionein respectively. Zinc pretreatment was significantly reduced testicular damages in five pathological categories after cadmium administation. The number of surviving interstitial cells was significantly higher in the zinc-pretreated group than in the saline-preatreated group at 48 and 72 hrs after cadmium administration. Non-damaged testis showed the positivity of MT staining in spermatogenic cells, Sertoli cells and endothelium of blood vessel, but not in the Leydig cells. The positivity of MT staining in saline-pretreated group was significantly reduced at 24 hrs after cadmium administration, whereas zinc-pretreated group showed strong MT positive staining similar to the 0 hr by 42 hrs after cadmium administration. In damaged testis, MT positive staining was also observed in the Leydig cells of both groups. These results suggest that a major preventive effect of zinc against cadmium-induced testicular toxicity may be due to its ability to reduce the cytotoxicity of cadmium in spermatogenic cells and Leydig cells by inhibiting the susceptibility of the testis to cadmium but not MT production by cadmium.

• Korean Journal of Clinical Laboratory Science
• /
• v.42 no.3
• /
• pp.136-148
• /
• 2010

Cadmium (Cd) is known to exert gonadotoxic and spermiotoxic effects. The present study was performed to investigate the morphological effects and metallothionein (MT) expression by zinc pretreatment in the course of time of cadmium-induced testicular injury in rat. Fifty male Spraque-Dawley rats weighing 160-180 g were divided into two groups: saline-pretreated cadmium group and zinc-pretreated cadmium group. Rats of two groups received subcutaneous injection of saline and 100 mg/kg $ZnSO_4$ at 0, 2, 5 and 8 hrs intervals respectively. Cadmium chloride (4.5 mg/kg $CdCl_2$) was administrated intraperitoneally at 2 hr after zinc injection and rats were killed 0, 12, 24, 48 and 72 hrs later. Testicular tissue damages, Interstitial (Leydig) cells status and MT expression were determined using hematoxylin-eosin stained sections and a computerized image analysis system on sections immunostained with a mouse anti-metallothionein respectively. Zinc pretreatment was significantly reduced testicular damages in five pathological categories after cadmium administation. The number of surviving interstitial cells was significantly higher in the zinc-pretreated group than in the saline-preatreated group at 48 and 72 hrs after cadmium administration. Non-damaged testis showed the positivity of MT staining in spermatogenic cells, Sertoli cells and endothelium of blood vessel, but not in the Leydig cells. The potitivity of MT staining in saline-pretreated group was significantly reduced at 24 hrs after cadmium administration, whereas zinc-pretreated group showed strong MT positive staining similar to the 0 hr by 42 hrs after cadmium administration. In damaged testis, MT positive staining was also observed in the Leydig cells of both groups. These results suggest a major preventive effect of zinc against cadmium-induced testiculat toxicity may be due to its ability to reduce the cytotoxicity of cadmium in spermatogenic cells and Leydig cells by inhibiting the susceptibility of the testis to cadmium but not MT production by cadmium.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.211-211
• /
• 2000

Carbon nanotubes (CNTs) have been spotlighted as one of promising field emission displays(FEDs). For the first time, to authors knowledge, we have developed the 9" color CNT-FEDs with the resolution of 240x576 lines. The 9" CNT-FEDs with diode-type and triode-type structures are presented. The well-dispersed CNT paste was squeezed onto the metal-patterned cathode glass. For the anode plate, the Y2O2S:Eu, ZnS:Ag,Cl low-voltage phosphors were printed for red, green, and blue colors, respectively. The vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images vacuum-packaged panel maintained the vacuum level of 1x10-7 Torr. The uniform moving images were demonstrated at 2 V/um. High brightness of 800, 200, and 150cd/m2 was observed on the green, red, and blue phosphors at V/um, respectively. Field emission characteristics of a triode-type CNT-FED were simulated using a finite element method. the resultant field strength on the cathode was modulated by gate bias and emitted electrons were focused on the anode. A relatively uniform emission image was experimentally achieved at the 800V anode. A relatively uniform emission image was experimentally achieved at the 800V anode and the 50-180 V gate biases. Energy distribution of electrons emitted from CNTs was measured using an energy analyzer. The maximum peak of energy curve corresponded to the Fermi energy level of CNTs. The whole fabrication processed of CNT-FEDs were fully scalable and reproducible. Our CNT-FEDs has demonstrated the high potential of large-area and full-color applications with very low cost fabrication and low power consumption.