• 한국유체기계학회 논문집
• /
• 제14권1호
• /
• pp.48-54
• /
• 2011

The effect of channel cutback on three-dimensional flow fields and aerodynamic losses downstream of a cavity squealer tip has been investigated in a turbine rotor cascade for the squealer rim height-to-chord ratio and tip gap height-to-chord ratio of $h_{st}/c$ = 5.51% and h/c = 2.0% respectively. The cutback length-to-camber ratio is changed to be $CB/c_c$ = 0.0, 0.1, 0.2 and 0.3. The results show that longer cutback delivers not only stronger secondary flow but also higher aerodynamic loss in the tip leakage vortex region, meanwhile it leads to lower aerodynamic loss in the passage vortex region. The discharge of cavity fluid through the cutback opening provides a beneficial effect in the reduction of aerodynamic loss, whereas there also exists a side effect of aerodynamic loss increase due to local wider tip gap near the trailing edge. With increasing $CB/c_c$ from 0.0 to 0.3, the aerodynamic loss coefficient mass-averaged all over the measurement plane tends to increase slightly.

• 태양에너지
• /
• 제17권1호
• /
• pp.35-46
• /
• 1997

In this study comparison of experiment results with the computed results of linear theory and nonlinear theory using singularity method was obtainable. Specially singularity points like sources and vortexes on hydrofoil and freestreamline were distributed to analyze two dimensional flow field of supercavitating cascade using nonlinear theory, and governing equations of flow field were derived and hydraulic characteristics of cascade were calculated by numerical analysis of the governing equations. The results compared linear theory and nonlinear theory with the experiment results of the study are as follows: The tolerances of nonlinear theory were larger than those of linear theory in case of ${\alpha}<10^{\circ}$. Moreover the computational range of attack angles could be expanded from ${\alpha}=10^{\circ}$ to ${\alpha}=25^{\circ}$, the flow field of supercavitating cascade could be analyzed in the condition which the wake thickness and the length of cavity are a variable. The shapes of cavity were changed sensitively according to various variable such as attack angles, pitches and wake thickness, and the pressure distribution of hydrofoil surface was identical almost disregarding wake thickness but changed largely according to attack angle and the length of cavity. Lift coefficient and drag coefficient were reduced according to increasing of wake thickness but the influences of wake thickness were very little in the situation of small pitch and long cavity.

• 한국전산유체공학회지
• /
• 제18권4호
• /
• pp.9-16
• /
• 2013

Cavitation on an axi-symmetric hemispherical head-form body was studied using an Reynolds-averaged Navier-Stokes equations solver based on a cell-centered finite volume method. To consider compressibility effects on the vapor phase and cavity interface, a pressure-based compressible flow CFD code was developed. To validate the developed CFD code, cavitating flow around the hemispherical head-form body was simulated using pressure-based incompressible and compressible CFD codes and validated against existing experimental data in the three-way comparison. The cavity shedding behavior, length of re-entrant jet, drag history, and Strouhal number of the hemispherical head-form body were compared between two CFD codes. The results, in this paper, suggested that the computations of cavitating flow with compressibility effects improve the description of cavity dynamics.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1640-1647
• /
• 1993

본 연구에서는 속도-압력 연계방법으로는 SIMPLE기법을 적용하고, 비균일 격자계에서도 사용할 수 있는 QUICKER방법과 함께 HYBRID방법을 이용하여 이와 같은 물음에 대한 대답을 구하고자 하였다. 이를 위하여 수치적 실험을 위한 흐름으로 본 연구에서 선택한 정사각형 공동 흐름 (square cavity flow)은 재순환 유동의 수치 적 해법을 위한 표준유동으로 많이 사용되어 왔으며, 대한기계학회 전산유체분과에서 도 여러 수치기법을 비교평가 하기 위한 흐름으로 채택된 적이 있는 흐름이다.

• 한국추진공학회지
• /
• 제13권4호
• /
• pp.9-15
• /
• 2009

스크램제트 엔진의 연소기 내부 유동은 초음속이므로 유동의 잔류시간과 혼합율의 증대가 효과적인 연소를 가능하게 하는 주요 요인으로 작용한다. 본 연구에서는 연료-공기 혼합기로써 L/D=4.8인 개방형 공동 모델을 사용하였고, 공동 앞에서의 경사 연료 분사 시 분사구 주위와 공동 주위의 유동특성을 살펴보기 위하여 레이저 슐리렌 기법과 압력측정을 실시하였다. 측정에 사용된 레이저 슐리렌은 10 ns의 매우 짧은 광원 지속시간을 보유하여 공동부근의 비정상 유동 현상을 효과적으로 관찰할 수 있었다. 압력측정은 연료 분사비 J(운동량비)를 변화시켜 가며 측정하였으며, 운동량비에 따른 연소기 내부 주요 압력상승 지점의 변화를 살펴 볼 수 있었다.

• 마이크로전자및패키징학회지
• /
• 제8권4호
• /
• pp.67-72
• /
• 2001

반도체 칩 캡슐화성형시 칩 캐비티에서의 유동을 보다 엄밀하게 모델링하고 해석하기 위한 연구가 이루어졌다. 리드프레임에서의 구멍부위를 통과하는 유동의 모델링을 시도하였고 리드프레임에서의 열 경계조건을 정확하게 취급하였다. 유동의 이론적 해석을 위해 헬레쇼오 모델을 채택하였고 리드프레임에 의해 아래 위로 분리된 각각의 캐비티로 가정하여 해석하였다. 리드프레임에서 구멍부위를 통과하는 유동은 헬레쇼오 모델링시에 질량 소스(source) 항으로 삽입되었다. 유동해석 프로그램과 콤플렉스 방법에 기반을 둔 최적화 프로그램을 연계하여 미성형 방지를 위한 최적 공정조건을 성공적으로 정확하게 얻어낼 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.85-89
• /
• 2003

In a closed square cavity filled with a liquid, a cooled the upper horizontal wall and a heated the lower horizontal wall, the flow isn't generated under the ground-based condition when Rayleigh number is lower than 1700. In such case the flow phenomena near an air bubble under a cooled horizontal wall were investigated. The temperature and the flow fields were studied by using the Thermo-sensitive Liquid-Crystal and the image processing. The qualitative analysis for the temperature and the flow fields were carried out by applying the image processing technique to the original data. Injecting bubble at the center point of upper cooled wall, the symmetry shape of two vortexes near an air bubble was observed. The bubble size increased, the size of velocity and the magnitude of velocity increased. In spite of elapsed time, a pair of two vortexes was the unique and steady-state flow in a square cavity and wasn't induce to the other flow in the surround region.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.435-449
• /
• 2014

The effects of the gravity field and the free surface on the cavity shape and the drag are investigated through a numerical analysis for the steady supercavitating flow past a simple two-dimensional body underneath the free surface. The continuity and the RANS equations are numerically solved for an incompressible fluid using a $k-{\epsilon}$ turbulence model and a mixture fluid model has been applied for calculating the multiphase flow of air, water and vapor using the method of volume of fluid and the Schnerr-Sauer cavitation model. Numerical solutions have been obtained for the supercavitating flow about a two-dimensional $30^{\circ}$ wedge in wide range of depths of submergence and inflow velocities. The results are presented for the cavity shape, especially the length and the width, and the drag of the wedge in comparison with those of the case for the infinite fluid flow neglecting the gravity and the free surface. The influences of the gravity field and the free surface on the aforementioned quantities are discussed. The length and the width of the supercavity are reduced and the centerline of the cavity rises toward the free surface due to the effects of the gravity field and the free surface. The drag coefficient of the wedge, however, is about the same except for shallow depths of submergence. As the supercavitating wedge is approaching very close to the free surface, it is found the length and the width of a cavity are shorten even though the cavitation number is reduced. Also the present result suggests that, under the influence of the gravity field and the free surface, the length of the supercavity for a certain cavitation number varies and moreover is proportional to the inverse of the submergence depth Froude number.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1687-1692
• /
• 2004

CT 사진을 이용하여 살아있는 사람의 비강 형상을 얻고 RP 를 이용하여 모형을 만들고 이 모형 으로 정교한 비강 유로 모형을 제작하였고, 호흡을 정확하게 모사하는 펌프를 만들었다. 사람의 호흡 데이터를 이용하여 캠을 제작하고 대형 피스 톤 펌프를 만들어 사람의 호흡을 정확 하게 모사 하였다. 이를 이용하여 생리적 주기를 갖는 비강 내 유동에 대한 결과를 획득하고 기존의 일정유량 하의 실험결과와 비교 분석하였다.

• Journal of applied mathematics & informatics
• /
• 제6권1호
• /
• pp.291-301
• /
• 1999

We study an optimal control problem of the fluid flow governed by the navier-Stokes equations. The control problem is formulated with the flow in the driven cavity. Existence of an optimal solution and first-order optimality condition of the optimal control are derived. We report the numerical results for the finite eleme수 approximations of the optimal solutions.