• Journal of the Korean Vacuum Society
• /
• v.17 no.5
• /
• pp.408-418
• /
• 2008

The rectangular resonant cavity was designed and characterized as a microwave plasma source for focused ion beam. The optimum cavity was calculated analytically and analyzed in detail by using HFSS(High Frequency Structure Simulator). Since the resonant cavity can be affected by the permittivity of quartz chamber and plasma, the cavity is designed to be changeable in one direction. By observing the microwave input power at which the breakdown begins, the optimum cavity length for breakdown is measured and compared with the calculated one, showing in good agreement with the optimum length reduced by 10cm according to the permittivity change in the presence of quartz chamber. The shape of breakdown power curve as a function of pressure appears to be similar to Paschen-curve. After breakdown, plasma densities increase with microwave power and the reduced effective permittivity in the cavity with plasma results in larger optimum length. However, it is not possible to optimize the cavity condition for high density plasmas with increased input power, because too high input power causes expansion of density cutoff region where microwave cannot penetrate. For more accurate microwave cavity design to generate high density plasma, plasma column inside and outside the density cutoff region needs to be treated as a conductor or dielectric.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.1
• /
• pp.91-101
• /
• 2019

Recently, small-scale excavation like ground cavity restoration and buried pipe replacement works are being carried out in urban area, in order to improve living convenience. This paper describes experiment results on the ground reinforcement method that can reduce the buried pipe damage, when the differential settlement occurred due to poor compaction of ground below the buried pipe. Plate load tests were conducted to evaluate a reinforcement effect of ground using concrete mat and expansion mat in the ground below the buried pipe. The results showed that the stress reduction ratio by concrete mat and expansion mat according to the surcharge load was about 46%~48% and 39%~42%, respectively. Therefore, the differential settlement of the buried pipe and the ground deformation below the buried pipes were reduced by the reinforcement effect of the concrete mat and expansion mat. This means that it is possible to prevent a buried pipe damage due to underground cavity and ground subsidence, if concrete mat and expansion mat are reinforced in the ground below the buried pipe or on the ground between the buried pipes.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.4
• /
• pp.449-453
• /
• 2000

Soft tissue expansion is widely used technique in oral & maxillofacial reconstruction and provide new method of reconstruction in posttraumatic alopecia, post burn, wide scar, congenital deformity, benign tumor, tattoo, etc. Expanded tissue flaps have the advantage of increased vascularity, proximity to the defect, and similarity of color and texture. They also preclude the need to advance flaps from distant sites. Tissue expansion can be used to form a well vascularized cavity to accomodate and nourish bone grafts. The following report describes the uses of tissue expanders by allowing bone grafting to correct both soft and bony defects of mandibular region

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.24-31
• /
• 1999

Bulging is a forming method to shape of die cavity by using hydraulic pressure in tube or vessel. Bulging machine and die were developed in order to produce vessel for keeping warm. Bulging machine is a double type with two horizontal cylinders for bulging of two pieces at the same time. The developed die system has one bulging die and two drawing dies for necking at the both ends of tube. The diameter of tube expands by hydraulic pressure in tube. at the same time, thrust at the both ends of tube. pushes tube in the direction of expansion to obtain high expanding rate with no crack. In this study, the bulging properties were investigated to solve tube crack and necking in manufacturing vessel by the combination method of bulging and drawing. As a result, high expanding rate of tube radius without crack, precision necking and high productivity were obtained.

• Imaging Science in Dentistry
• /
• v.42 no.2
• /
• pp.83-88
• /
• 2012

Purpose : The aim of this study was to investigate the initial effects of maxillary expansion therapy with Hyrax appliance and to evaluate the related changes in maxillary sinus volume. Materials and Methods : Thirty patients (20 females, 10 males; 13.8 years) requiring maxillary expansion therapy, as part of their comprehensive orthodontic treatment, were examined. Each patient had cone-beam computed tomography (CBCT) images taken before (T1) and after (T2) maxillary expansion therapy with a banded Hyrax appliance. Multiplanar slices were used to measure linear dimensions and palatal vault angle. Volumetric analysis was used to measure maxillary sinus volumes. Student t tests were used to compare the pre- and post-treatment measurements. Additionally, differences between two age groups were compared with Mann-Whitney U test. The level of significance was set at p=0.05. Results : Comparison of pre-treatment to post-treatment variables revealed significant changes in the transverse dimension related to both maxillary skeletal and dental structures and palatal vault angle, resulting in a widened palatal vault (p<0.05). Hard palate showed no significant movement in the vertical and anteroposterior planes. Nasal cavity width increased on a mean value of 0.93mm(SD=0.23, p<0.05). Maxillary sinus volume remained virtually stable. No significant age differences were observed in the sample. Conclusion : Hyrax expansion therapy did not have a significant impact on maxillary sinus volume.

• Imaging Science in Dentistry
• /
• v.42 no.1
• /
• pp.61-64
• /
• 2012

Keratocystic odontogenic tumor (KCOT) is a benign odontogenic tumor with a potentially aggressive and infiltrative behavior. KCOT is most commonly occurred in mandible and demonstrate a unilocular, round, oval, scalloped radiolucent area, while large lesions may appear multilocular. An important characteristic of KCOT is its propensity to grow in an antero-posterior direction within medullary cavity of bone causing minimal expansion. Definitive diagnosis relies on histological examination. In this report, a KCOT that had an expansion both buccal and lingual cortical bone is described including its features in computed tomography and ultrasonographic exams. The lesion was removed surgically via an intraoral approach under local anesthesia and histologically reported as a KCOT.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.33-40
• /
• 2000

With the increased requirement for automobile noise, a design fo mufflers with higher performances becomes more important in recent days. For a design of some mufflers, it must satisfy both minimizing back pressure and maximizing sound attenuation in broad range of frequecny. Even for a simple Helmholtz resonator, an important element in a muffler, a resonator design with accurate resonant frequency is difficult if one want to consider standing waves within the cavity. In this paper, the genetic algorithm, one of the optimization technique with high capability of global fittest solution and robust convergence, is applied to the design process of mufflers. Results show that the genetic algorithm can be successfully and efficiently used to find the fittest model for both mufflers and Helmoltz resonators.

• The Journal of the Korean dental association
• /
• v.15 no.10
• /
• pp.679-683
• /
• 1977

A 13-year old boy was referred to the dept. of Oral Surgery in Dental Infirmary of S.N.U. and followed by thorough examination, was diagnosed as an odontogenic cyst in maxilla. The author has reported this case because it is a rare one that the expansion of two different preoccurred odontogenic cysts formed a large fused-type cystic cavity and complete enucleation of the mass under general anesthesia brought satisfactory results.

• Journal of Mechanical Science and Technology
• /
• v.18 no.3
• /
• pp.407-418
• /
• 2004

Prandtl-Meyer expansion flow with homogeneous condensation is investigated experimentally and by numerical computations. The steady and unsteady periodic behaviors of the diabatic shock wave due to the latent heat released by condensation are considered with a view of technical application to the condensing flow through steam turbine blade passages. A passive control method using a porous wall and cavity underneath is applied to control the diabatic shock wave. Two-dimensional, compressible Navier-Stokes with the nucleation rate equation are numerically solved using a third-order TVD (Total Variation Diminishing) finite difference scheme. The computational results reproduce the measured static pressure distributions in passive and no passive Prandtl-Meyer expansion flows with condensation. From both the experimental and computational results, it is found that the magnitude of steady diabatic shock wave can be considerably reduced by the present passive control method. For no passive control, it is found that the diabatic shock wave due to the heat released by condensation oscillates periodically with a frequency of 2.40㎑. This unsteady periodic motion of the diabatic shock wave can be completely suppressed using the present passive control method.

• The korean journal of orthodontics
• /
• v.47 no.5
• /
• pp.313-322
• /
• 2017

Objective: Miniscrew-assisted rapid palatal expansion (MARPE) is a means for expanding the basal bone without surgical intervention in young adults. Here, we assessed the differences in dental, alveolar, and skeletal measurements taken before (T0), immediately after (T1), and 1 year after (T2) MARPE. Methods: Twenty-four patients (mean age, 21.6 years) who had undergone MARPE and cone-beam computed tomography at T0, T1, and T2 were included. Changes in the following parameters were compared using paired t-tests: intercusp, interapex, alveolar, nasal floor, and nasal cavity widths; inclination of the first molar (M1) and its alveolus; and thickness and height of the alveolar bone. A linear mixed-effects model was used to determine variables that affected periodontal changes in the M1. Results: MARPE produced significant increases in most measurements during T0-T2, despite relapse of some measurements during T1-T2. The alveolar thickness decreased on the buccal side, but increased on the palatal side. The alveolar crest level at the first premolar moved apically. Changes in the thickness and height of the alveolar bone were affected by the corresponding initial values. Conclusions: MARPE can be used as an effective tool for correcting maxillomandibular transverse discrepancy, showing stable outcomes 1 year after expansion.