• International Journal of Precision Engineering and Manufacturing
• /
• 제2권4호
• /
• pp.40-46
• /
• 2001

Bulging is a forming method to shape die cavity by using hydraulic pressure in tube or vessel. Bulging machine and die were developed in order to produce vessel for keeping warm. Bulging machine is a double type with two horizontal cylinders for bulging of two pieces at the same time. The developed die system has one bulging die and two drawing dies for necking at both ends of the tube. The diameter of tube expands by hydraulic pressure in tube. At the same time, thrust at both ends of the tube pushes tube in the direction of expansion to obtain high expansion rate with no crack. In this study, the bulging properties were investigated to solve tube crack and necking in manufacturing vessel by combining bulging and drawing. As a result, high expanding rate of tube radius without crack, precision necking and high productivity were obtained.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.153-160
• /
• 2001

피에조콘관입시험(PCPT)의 소산시험은 in-situ 상태의 압밀계수(c/sub v/)를 추정하는 방법으로 널리 이용되어왔다. 본 연구에서는 spherical cavity expansion theory 및 axisymmetric uncoupled linear consolidation equation(Gupta & Davidson, 1986)을 이용하여 과압밀점토에서의 초기과잉간극수압의 분포 및 과잉간극수압의 시간에 대한 소산현상을 해석하는 수치해석방법을 제안하여 현장시험결과 및 실내시험결과와 비교 분석하였다. ADIS (alternating direction implicit scheme)를 이용한 FDM 해석을 실시한 결과와 현장시험의 소산곡선은 잘 부합되는 것으로 나타났으며 압밀계수도 실내실험 또는 피에조콘관입 시험에 대한 추정방법으로 산출된 값과 비교적 일치하는 것으로 나타났다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.215-222
• /
• 2001

Uncertainty study of shear strength characteristics of the marine clays was carried out based ell In-situ tests and laboratory tests on tile south-east coastal region of the Korean peninsula. Theoretical analyses were studied using both tile spherical cavity expansion theory in finite soil mass and the strain path method to determine tile cone factor using the undrained shear strengths obtained by in-situ tests, and the empirical methods in accordance with the ultimate resistance theory were also discussed. Analysis show that the empirical methods suggest more reasonable value than that of theoretical methods in terms of comparing the cone factor estimated using linear regression and frequency distribution analyses. The cone factors obtained by the empirical methods are 18, 15, and 6 respectively, from the results of total cone resistance, effective cone resistance, and excess porewater cone resistance method, and the estimated were similar to those of previous researcher's.

• Computers and Concrete
• /
• 제33권4호
• /
• pp.471-479
• /
• 2024

In urban areas, appropriate backfilling design is necessary to prevent surface subsidence and subsurface cavities after excavation. Expandable foam grout (EFG), a mixture of cement, water, and an admixture, can be used for cavity filling because of its high flowability and volume expansion. EFG volume expansion induces a porous structure that can be quantified by the entrapped air content. This study observed the unit weight variations in the EFG before and after expansion depending on the various admixture-cement and water-cement ratios. Subsequently, the air content before and after expansion and the gravimetric expansion ratios were estimated from the measured unit weights. The air content before expansion linearly increased with an increase in the admixture-cement ratio, resulting in a decrease in the unit weight. The air content after the expansion and the expansion ratio increased nonlinearly, and the curves stabilized at a relatively high admixture-cement ratio. In particular, a reduced water-cement ratio limits the air content generation and expansion ratio, primarily because of the short setting time, even at a high admixture-cement ratio. Based on the results, the relationship between the maximum expansion ratio of EFG and the mixture ingredients (water-cement and admixture-cement ratios) was introduced.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.769-772
• /
• 2009

Diaphragm compressors are used for a hydrogen compression because it can achieve high gas pressure with high purity. But diaphragm's lifetime may depend on the shape of the cavity and deflection from fluctuation the pressure change, which is necessary to monitored. In this study, the gas and hydraulic oil pressure in the cavity were measured as piston speed varies for diaphragm compressor. The results show pressure change quantities were reduced and maximum pressure points are delayed as the piston moves faster. And the hydraulic pressure were elevated as gas pressure elevated. And the compression period was more faster than expansion period.

• KIEAE Journal
• /
• 제14권6호
• /
• pp.93-97
• /
• 2014

Curtain wall system of office buildings has recently become very common in Korea. As the multi-layer curtain glazing is exposed to outdoor environment, it is very subjected to direct environmental impact. Consequently, breakage and cracks of glazing due to heat expansion is frequently observed. This study explores various causes and aspects for destruction of multi-layer glazing. A sensitivity analysis was performed on the basis that thermal changes causes damage to the multi-layer glazing. Air temperature in air cavity within the multi-layer glazing was examined to find its effect on multi-layer glazing breakage. Analysis showed high deflection to depth ratio of 1:1.8 and that higher the aspect ratio, smaller is the deflection. Allowable pressure showed that the weakest value is for aspect ratio of 1:2.9. Sensitivity analysis by the area of the glazing showed that as area of glazing becomes higher, allowable pressure and deflection-depth ratio becomes smaller. For allowable pressure and allowable deflection-depth within air cavity, the glazing breakage occurred at least $107^{\circ}C$. The results from glazing breakage by thermal factor shows that it is hard to break the glazing with only an increase in air cavity temperature in multi-layer glazing applied in buildings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.419-433
• /
• 2009

Pressure grouting is a common technique in geotechnical engineering to increase the stiffness and strength of the ground mass and to fill boreholes or void space in a tunnel lining and so on. Recently, the pressure grouting has been applied to a soil-nailing system which is widely used to improve slope stability. The soil-nailing design has been empirically performed in most geotechnical applications because the interaction between pressurized grouting paste and the adjacent ground mass is complicated and difficult to analyze. The purpose of this study is to analyze the increase of pullout resistance induced by pressurized grouting with the aid of performing laboratory model tests and field tests. In this paper, two main causes of pullout resistance increases induced by pressurized grouting were verified: the increase of residual stress; and the increase of coefficient of pullout friction. From the laboratory tests, it was found that residual stress in borehole increases by pressurized grouting and dilatancy angle could be estimated by cavity expansion theory using the measured wall displacements. From the field test results, the pullout resistance of soil-nailing with pressurized grouting was found to be 10% larger than that of soil-nailing with gravitational grouting, mainly caused by mean normal stress increase and dilatancy effect. So, the pullout resistance could be estimated by considering these two effects. The radial displacement increases with dilatancy angle increase and the dilatancy angle decreases with injection pressure increase. The measured pullout resistance obtained from field tests is in good agreement with the estimated one from the cavity expansion theory.

• 한국지반공학회논문집
• /
• 제23권8호
• /
• pp.77-85
• /
• 2007

본 연구에서는 선정된 부산 신항만 공사 지역의 연약 점토층을 대상으로 비배수전단강도 값을 분석하고 CPT적용을 위한 콘계수의 변화특성 및 영향인자를 비교분석하고자 한다. 이를 위해 다양한 현장시험과 실내시험 결과를 분석하였으며, 현장시험에서 구해진 콘계수와 실내시험에서 얻어진 결과를 토대로 한 이론적인 콘계수와의 비교를 통해 해당 현장에 가장 적합한 이론식을 선정하고자 한다. 본 연구에서 사용된 이론식은 Baligh(1975)와 Yu(1993)의 공동 확장 이론과 Teh and Houlsby(1991)와 Yu 등(2000)의 정적 상태 해석법이 사용되었으며, 공동 확장 해석법이 현장 시험을 통해 측정된 콘계수와 부합하는 결과를 나타내었다.

• 한국지반환경공학회 논문집
• /
• 제20권2호
• /
• pp.19-28
• /
• 2019

국내 서해안 지역은 대부분 퇴적된 연약점성토로 이루어져 있으며, 구조물을 시공하기 전에 현장에 적합한 지반개량 공법의 적용이 필요하다. 본 연구에서는 CGS(Compaction Grouting System) 공법의 적용성을 파악하기 위하여 매립토 및 연약점성토로 이루어진 인천국제공항시설 현장에 공법을 적용하였다. CGS 공법은 현장 성토부의 지반개량 효과를 얻기 위함뿐만 아니라 교대의 말뚝기초 역할을 위해 적용되었으며, 본 공법의 지반개량 효과를 파악하기 위하여 공법 적용 전 후 지반의 개량 효과를 콘 관입시험을 수행함으로써 비교 분석하였다. CGS 공법의 적용 결과 현장지반의 전반적인 강도 증대 효과를 얻을 수 있었으며, 이는 현장교대의 하중을 충분히 견딜 수 있는 것으로 파악되어 말뚝기초로의 역할과 지반개량공법으로써의 CGS 공법의 적용성을 검증하였다. 또한 공동팽창이론을 적용하여 상부 구근의 크기 예측을 수행하였으며, 시공 후 상부구근 육안 확인을 통하여 시공 후 구근예측에 있어 공동팽창이론의 적용 가능성을 평가하였다.

• 한국지반공학회논문집
• /
• 제25권7호
• /
• pp.35-46
• /
• 2009

압력식 쏘일네일링 공법은 지반에 네일을 삽입한 후 압력그라우팅을 수행하여 지반과 그라우팅 사이의 인발저항력 증가를 활용한 공법으로 원지반의 강도를 최대한 활용한 공법이다. 최근들어, 쏘일네일링 공법은 절취사면 보강이나 도심지 터파기 및 흙막이 구조물, 옹벽 보강 등 사면안정에 많이 시용된다. 하지만 압력식 쏘일네일링 공법은 그라우팅을 가압하여 주입함에 띠라 주입 시와 주입 후의 지반응력의 변화 양상에 매우 복잡하다. 따라서 압력식 쏘일네일링 공법에 의한 인발저항력의 증가양상을 파악하기가 매우 어렵기 때문에 대부분 경험적인 설계가 이루어 지고 있는 실정이다. 본 연구는 압력식 쏘일네일링 공법의 인발저항력의 증가를 이론적으로 규명하고 실내 및 현장 시힘을 바탕으로 비교하여 인발저항력을 예측히는데 그 목적이 있다. 본 논문에서는 인발저항력의 증가에 영향을 미치는 요소를 공벽에 작용히는 평균연직응력과 인발마찰계수의 증가로 규명하였다. 실내시험을 통해서 측정된 반경방향 변위를 본 논문에서 제안한 공팽창이론에 적용하여 팽창각을 산정하였다. 팽창각이 감소함에 따라 반경방향변위는 증가하고 주입압이 증가함에 따라 팽창각이 증가하는 것을 알 수 있었다. 또한 현장인발시험을 통해서 측정한 인발저항력이 제안된 인발저항력과 거의 통일한 것을 알 수 있었다.