• 한국산학기술학회논문지
• /
• 제22권6호
• /
• pp.566-572
• /
• 2021

본 논문에서는 도시환경과 모래가 많은 토양 아래에 구 형태의 빈 공간이 있을 경우를 가정하고, 해당 목표물의 고유 pole과 고유 공진주파수를 활용하여 목표물을 식별 및 위치를 추정하는 방안을 제시하였으며 가능성을 분석하였다. EM(Electromagnetic) 시뮬레이터를 활용하여 다양한 형태와 크기를 가진 완전도체(PEC: Perfect Electric Conductor)들을 모델링하였고, 이를 통해 획득한 EM 산란응답에 Cauchy 방법을 적용하여 물체의 고유 특성에 해당하는 고유 pole을 축적하여 pole 라이브러리를 생성하였다. 생성된 pole 라이브러리는 목표물에서 추출한 고유 pole과의 비교를 통해 목표물을 식별할 수 있는 가능성을 제공해 준다. 도시환경과 모래가 많은 토양 아래에 구 형태의 빈 공간이 있음을 가정하고 EM 시뮬레이션 모델링을 통해 얻은 전자파 산란 데이터로부터 관심 목표물의 응답을 추출하였으며, 시간영역에서 임펄스 응답의 시간 지연을 이용하여 목표물의 위치를 추정할 수 있었다. 또한 MP(Matrix Pencil) 방법을 적용하여 목표물의 고유 pole을 추출하였다. 최종적으로 계산된 고유 pole과 고유 공진주파수를 pole 라이브러리와 비교하여 탐지된 목표물을 구 형태의 빈 공간(직경 0.2m)으로 추정할 수 있었으며, 계산된 목표물의 위치(깊이)는 약 84 ~ 93%의 정확도를 보였다.

• 한국소음진동공학회논문집
• /
• 제22권1호
• /
• pp.61-73
• /
• 2012

The paper presents the novel approach to solve some problems occurred in application of the genetic algorithm to the determination of the optimal tire pattern sequence in order to reduce the tire air-pumping noise which is generated by the repeated compression and expansion of the air cavity between tire pattern and road surface. The genetic algorithm has been used to find the optimal tire pattern sequence having a low level of tire air-pumping noise using the image based air-pumping model. In the genetic algorithm used in the previous researches, there are some problems in the encoding structure and the selection of objective function. The paper proposed single encoding element with five integers, divergent objective function based on evolutionary process and the optimal evolutionary rate based on Shannon entropy to solve the problems. The results of the proposed genetic algorithm with evolutionary process are compared with those of the randomized algorithm without evolutionary process on the two-dimensional normal distribution. It is confirmed that the genetic algorithm is more effective to reduce the peak value of the predicted tire air-pumping noise and the consistency and cohesion of the obtained simulation results are also improved in terms of probability.

• 한국응급구조학회지
• /
• 제10권1호
• /
• pp.23-39
• /
• 2006

In Korea, There are many disasters, like the collapse of Sampung department store, the strike of severe typhoon 'Rusa' and the subway tragedy in Taegu, because of global warming, urbanization, high-density and high-rise of buildings. So, the government made 'The Framework Act' on the safe and management of disaster and 'The National Emergency Management Agency' was established. But emergency medical service systems in Korea is not growing so much. The purpose of this research is to give basic data for the development of emergency medical service systems in Disaster by comparing of disaster management systems and emergency medical systems among the nations of the world, analysing emergency medical systems in disaster in Korea and suggesting some improvement methods. The improvment methods are like this ; First, establishing the National Disaster Medical System in Korea, making the good triage by EMT, expansion of EMT's working area, developing protocols and framing of medical director increasing the working force of EMT, broad inner cavity of ambulance for treatment of patientent, supplement of professional equipments, active using of helicopters are needed in prehospital are. Second, equal establishment of emergency medical center and increase of working force of emergency medical team are needed in hospital area. Finally, enforcement of the dispatcher's qualification, smooth communication among EMSS systems and actualization of medical direction through screen are needed in the Telecommunication system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.312-333
• /
• 2006

This paper presents the results of an analysis of the excess porewater pressure distribution due to piezocone penetration in overconsolidated clays. From piezocone test results for moderately and heavily overconsolidated clays, it was observed that the excess porewater pressure increases monotonically from the piezocone surface to the outer boundary of the shear zone and then decreases logarithmically to the outer boundary of the plastic zone. It was also found that the size of the shear zone decreases from approximately 2.2 to 1.5 times the cone radius with increasing OCR, while the plastic radius is about 11 times the piezocone radius, regardless of the OCR. The equation developed in this study based on the modified Cam clay model and the cylindrical cavity expansion theory, which take into consideration the effects of the strain rate and stress anisotropy, provide a good prediction of the initial porewater pressure at the piezocone location. The method of predicting the spatial distribution of excess porewater pressure proposed in this study is based on a linearly increasing ${\Delta}u_{shear}$. In the shear zone and a logarithmically decreasing ${\Delta}u_{oct}$, and is verified by comparing with the excess porewater pressure measured in overconsolidated specimens at the calibration chamber.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.561-568
• /
• 2000

본 연구의 목적은 Piezocone 관입시험을 이용한 연약지반의 OCR 평가에 있어 기존의 여러 가지 해석방법들과 최근에 새롭게 제안된 방법들을 실내 모형토조에서 실측된 피에조콘 관입 실험치에 적용하여 각 해석방법들의 차이와 장단점들을 비교 분석하는데 있다. 본 연구의 연구실험방법으로는, Piezocone 관입을 위한 연약 모형지반 조성을 위하여 초대형 Slurry Consolidometer에 Free Stress 상태의 Slurry를 45일간 압밀시킨후 Automatic Computer Control Calibration Chamber (LSU/CALCHAS; Louisiana Slate University Calibration Chamber System)에 옮긴후 다시한번 압밀시키는 Two-Stage Consolidation Method를 사용하였다. 모형지반은 여러 가지 Boundary Condition들과 Stress Condition 그리고 Stress History등을 달리하여 총 5개의 지반을 조성하였다. 관입시험은 총 25개의 Piezocone 관입이 수행되어졌고, 그중 4개는 Standard 10 cm2 Piezocone이고, 나머지 21개는 Miniature Piezocone이 사용되었다. Piezocone 실험치들에 대한 여러 가지 OCR 해석방법 적용결과, Schmertmann방법은 5개 모형지반 모두에서 과다한 OCR평가를 보였으며, $B_{q}$ 방법은 일부모형지반에서 음의 OCR값으로 계산되어졌다. 그러나, Critical-Stale Soil Mechanics 와 Cavity Expansion 이론에 근거하여 Mayne(1991), Kurup(1993), Tumay et al (1995) 들이 제안한 OCR 평가방법들은 실험치와 잘맞는 경향을 보여주었다. 이와같은 이론 모델값들의 차이는 응력조건(Stress Condition)과 경계조건(Boundary Condition)들에 대한 각 해석방법들의 고려정도에 따른 결과로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1159-1166
• /
• 2005

In the present study, a series of laboratory tests with sands of different silt contents, are conducted and methods to assess non-linear behaviors based on in-situ test results are proposed. Modified hyperbolic stress-strain model is used to analyze non-linearity of silty sands in terms of non-linear degradation parameters f and g as a function of silt contents and relative density $D_R$. Stress-strain relationship results were obtained from a series of triaxial tests on sands containing different amounts of silt. Initial shear modulus which was applied to normalize modulus degradation of silty sands were determined based on the resonant column test results. From the laboratory test results, it was observed that, as the relative density increases, values of f decrease and those of g increase. Cone resistance $q_c$ for silty soil condition used in the triaxial tests were estimated based on the cavity expansion analysis. A suggestion to make an estimation of degradation parameters f and g as a function of fine contents is addressed in terms of cone resistance $q_c$ .

• 항공우주기술
• /
• 제2권1호
• /
• pp.164-170
• /
• 2003

KSR-III 주 엔진에서 발생한 연소불안정 방지를 위한 필름 냉각방식의 내열재 배플을 장착한 확대비 5.04의 엔진의 40초 연소시험을 수행하였다. 시험 조건은 KRS-III 새로 설정한 설계점 조건으로 산화제 공급유량 42.04kg/sec, 연료공급 유량 17.96kg/s를 공급조건으로 설정하였다. 연소불안정을 방지하기 위해 필름 냉각방식의 내열재 배플을 장착한 EM#11호기 설계점 연소시험을 한 결과 설정 연소시간인 40초 동안 연소불안정이 발생하지 않았다.

• 대한기계학회논문집B
• /
• 제26권5호
• /
• pp.666-674
• /
• 2002

A rapid expansion of the moist air or stream through transonic nozzle often leads to not-equilibrium condensation shock, causing a considerable amount of energy loss to the entire flow field. Depending on amount of heat released, condensation shock wave occurs in the nozzle and interacts with the boundary layer flow. In the current study, a passive control technique using a porous wall with a plenum cavity underneath is applied for purpose of alleviation the condensation shock wave in a transonic nozzle. A droplet growth equation is incorporated into two-dimensional wavier-Stokes equation systems. Computations are carried out using a third-order MUSCL type TVD finite-difference scheme with a second-order fractional time step. An experiment using an indraft transonic wind tunnel is made to validate the present computational results. The results obtained show that the magnitude of condensation shock wave is reduced by the current passive control method.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.127-134
• /
• 2010

Components in thermal power plants are subjected to service conditions under which creep damages take place causing material exhaustion. Comprehensive creep damage investigations have been performed on a 0.5Cr0.5Mo0.25V pipe bend which had been taken out of service after 117,603h and 501 start-ups because of severe cracks. The propagation of creep damage in a long term exposed pipe bend has been analysed by the replication, Indentation and hardness tests. Also, Calculation of creep lifetime has been investigated in order to verify actual lifetime of a damaged pipe bend. By measuring diametrical expansion, Accumulated creep strain and creep strain rate were calculated. Calculated results of creep lifetime on the Larson-Miller Parameter method are good agreement with actual service-exposed hour.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.93-98
• /
• 2006

Warm forming technology was classified into hot gas forming of using compressible fluid as a nitrogen gas and warm hydroforming of using the incompressible fluid as a thermal oil by using medium fluid. In this study, the aluminum side-rail part was developed with warm hydroforming technology. For the warm hydroforming system, top and bottom die was designed to insert heating cartridge in die cavity and special indirect fluid heating system was designed to heat the thermal oil. As increase the temperature, hydroformability was increased linearly. Aluminum side-rail center part was formed 90% at the internal pressure of 100bar and perfectly formed at 300bar within a moderate temperature. The tube material used for warm hydroforming was a aluminum 6000 series alloy with the diameter of 120mm, thickness of 5mm, length of 1,300mm. Warm hydroformed side-rail center part had 20% of maximum expansion ratio and below 20% of maximum thinning ratio at corner radius. This results were provided to show warm hydroforming possibility for aluminum automotive components.