• Korean Journal of Optics and Photonics
• /
• v.16 no.1
• /
• pp.13-20
• /
• 2005

Fiber-Bragg-grating external cavity laser(FGL) modules were fabricated and experimentally analyzed. Proposed as a cost-effective solution for optical sources in the WDM-PON access network, FGL modules were packaged to TO-CAN type. We obtained a low threshold current of 13 mA, and an optical output power of 3.6 mW with a bias current of 60 mA at $25^{\circ}C$. The lasing wavelength dependencies on current and temperature were as small as 5.2 pm/mA and 30 pm/$^{\circ}C$, respectively. These change rates of the wavelength with the temperature and current are smaller than those of the DFB laser. Single-mode oscillations with the side-mode suppression ratio(SMSR) over 30 dB are maintained above the threshold current level. The FGL modules can be directly modulated at 155 Mbps, PRBS(2$^{23}$ -1) NRZ signal. Through the BER plots, we did not see the significant degradations before and after the transmission over 20km of the SMF at 155 Mb/s.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1983.05a
• /
• pp.10.1-10
• /
• 1983

We have analysed the 76 cases of the foreign bodies of our ENT department during the period from Jun. 1973 to Feb. 1983. The following results were obtained and were reported. 1) Distribution of these whole 105 cases, 68 cases (64.8 %) were lodged in esophagus, 13 cases (12.4 %) were in the nasal cavities, 9 cases (8.5 %) were in the oral cavity and throat, 8 cases (7.6 %) were in the air passages, and 7 cases (6.7 %) were in the external auditory canal. 2) The sorts of the esophageal foreign bodies, the coins were the most cases(53 cases - 77.9 %) and other sites were shown of variable kinds. 3) Age distribution of the esophageal foreign bodies were mostly in under 5 years of age (49 cases - 72 %) and in cases of the air passages, all the 8 cases were in under 10. 4) In the localities of the esophageal foreign bodies, first narrowing was the most frequent site (61 cases - 89.7 %), and of air passages, 6 cases were in the left main bronchus, more that of Rt. main bronchus. 5) During the lodgement of esophageal foreign bodies, 58 cases (85.3 %) were visited to our ENT department within 24 hours. In the cases of air passages, most were viaited in 3 to 7 days (6 cases -75 %).

• Korean Journal of Microbiology
• /
• v.42 no.3
• /
• pp.199-204
• /
• 2006

Streptococcosis of olive flounder(Paralichthys olivaceus) is an important bacterial disease in Jeju island. In this study, we investigated monthly infection pattern of this disease in different size of the flounder fish. Even though the disease occurred throughout the year, the infection ratio was relatively higher in the months with warm water season. The infection was more prevalent in adult flounder over 30 cm total length compare to these of small size fish. Two infectious species of streptococcosis pathogens were detected by multiplex PCR assay. Detection ratios of Streptococcus iniae and S. parauberis reached up to 46% and 54%, respectively, from June 2003 to May 2005 in Jeju island. S. iniae occurred intensively from September to October, whereas S. parauberis reported from March to May. S. iniae and S. parauberis infections of cultured flounder share some common features, but clinical findings showed considerable differences between two diseases. Distended abdomen, protruded anus and ascitic fluid in the peritoneal cavity are evident lesions detected in S. iniae infection, whereas, flounders infected by S. parauberis showed prominent lesions such as darkened surface and haemorrhaging in the non-ocular side. Both streptococcosis pathogens were sensitive to antibiotics, such as ampicillin and amoxicillin. However, S. iniae strains were more sensitive to doxycycline, erythromycin and oxytetracycline than S. parauberis strains.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.227-236
• /
• 2003

The evaluation of the reliable strength and deformation characteristics of weathered granite masses is very important for the design of geotechnical structure under working stress conditions. Various types of laboratory test such as triaxial compression test can be performed to determine the strength parameters. However, it is very difficult to obtain the representative undisturbed samples on the site and also the rock specimen cannot represent rock mass including discontinuities, fracture zone, etc. This study aims to investigate the strength and deformation characteristics of granite masses corresponding to its weathering and develop a practical strength parameter evaluation method using the results of PMT. To predict weathering intensity and strength parameters of the weathered granite masess in the field, various laboratory tests and in-situ tests including field triaxial test and PMT are carried out. Based on the results of weathering index tests, the classification method is proposed to identify the weathering degree in three groups for the weathered granite masses. Using the analytical method based on the Mohr-Coulomb failure criteria and the cavity expansion theory, the strength parameters of rock masses were evaluated from the results of PMT. It shows that weathering intensity increases with decreasing the strength parameters exponentially. The strength parameters evaluated with the results of PM almost coincide with the results of field triaxial test.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.61-72
• /
• 1993

Result of this study indicate that two criteria must be met in order to have effective macrocycle-mediated transport in these emulsionsystem. First, one must effective extraction of the post transition metals, $Cd^{2+}$. $Pb^{2+}$ and $Hg^{2+}$ , into toluene membrane. The effectiveness of this extraction is greatest if log K values for the metal-macrocycle interaction is large. Second, the ratio of the log K values for the metal ion-receiving phase to the metal ion-macrocycle interaction must be large enough to ensure quantitative stripping of the metal ion at the toluene phase interface. Control of the first step can be obtained by appropriate selection of macrocycle donor atom, substituents, and cavity radius. The second step can be controlled by selecting the proper complexing agent for inclusion in the receiving phase. The order of the transport, when using the several $A^-$ species such as $SCN^-$, $1^-$, $Br^-$ and $Cl^-$ is the order of the changing degree of solvation for $A^-$ and the transport of the metals is also affected by the control of concentration for receiving species because of solubility-differences. In this study, we can seperate each single metal ion from the mixture of $Cd^{2+}$, $Pb^{2+}$, and $Hg^{2+}$ ions by using the toluene membranes controlled by optimized conditions. Transport of the single metal is also very good, and alkaline and alkaline earth metals as interferences ions did not affect the seperation of the metals in this macrocycle-liquid membrances but transition metal ions were partially affected as interferences for the post transition metal ions.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.11
• /
• pp.23-30
• /
• 2018

According to recent ground collapse occurrence, ground subsidence is increasing every year in downtown area, which is a social problem. The purpose of this study is to investigate the relationship between ground water level lowering and ground collapse through laboratory model experiments. After mixing 1:1 granite weathered soil with sand, sandy soil was formed as a relative density of 30%, 50%, and 80%. And then the changes of soil discharge with change of groundwater level were compared. The physical property of material of which particle distribution were well graded with maximu dry unit weight of $1.94kg/cm^3$ and internal friction angle of 37degrees. Ground water levels were measured at 10 cm, 20 cm, and 30 cm from the bottom. As a result, the experiment shows that the higher the groundwater level works the higher the discharge velocity and the magnitude of underground cavity also increases with elapsed time. Finally, the cumulative quantity of soil discharge occurred up to 30 kg at the elapsed time, 35 minutes. It was also confirmed that the range of ground collapse increased due to soil discharge with ground water level lowering.

• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.29-36
• /
• 1999

The objective of this study is to analyse the flow field in the branching duct by visualizing the flow phenomena using the PIV system. A bifurcation model is fabricated with transparent acrylic resin to visualize the whole flow field with the PIV system. Water was used as the working fluid and the conifer powder as the tracer particles. The single-frame and two-frame methods of the PIV system and 2-frame of the grey level correlation method are applied to obtain the velocity vectors from the images captured in the flow filed. The velocity distributions in a lid-driven cavity flow are compared with the so-called standard experimental data, which was obtained from by 4-frame method in order to validate experimental results of the PIV measurements. The flow patterns of a Newtonian fluid in a branching duct were successfully visualized by using the PIV system and the sub-pixel and the area interpolation method were used to obtain the final velocity vectors. The velocity vectors obtained from the PIV system are in good agreement with the numerical results of the 3-dimensional branch flow. The results of numerical analyses and the PIV experiments for the three-dimensional flows in the branch ing duct show the recirculation zone distal to the branching point and the sizes of the recirculation length and height of the tow different methods are in good agreement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.394-410
• /
• 1993

This study was accomplished for appreciation of the mandibular moments according to antero- posterior movement of pivot placed on the lower natural dentition. For this study, 20 subjects(male, $21\sim30$ yrs., average age 24) in the category of normal occlusion were selected, and the intraoral Vitallium clutches were cast and fabricated for each subjects. A 2-dimension PSD(Position Sensitive Detector, Hamamatsu Photonics Co., Japan) was attached to maxillary clutch in a mode of three dimensional control and LED (Light Emit Diode, Hamamatsu Photonics Co., Japan) was set up on mandibular clutch. Both clutches were set into oral cavity of each subjects and adjusted. Then the subjects were allowed to intercuspated with maximal bite force while the pivoting ball in the mid-line moving from anterior toward posterior position. The displacement scales were recorded by CCD camera(Sony, CCD-TR-705) and VCR, The conclusions were as follows : 1. When the subject was allowed to bite the metal pivoting ball in the midline of lower dentition with maximal bite force voluntarily while moving from lower central incisor to canine, 1st premolar, End premolar, 1st molar and 2nd molar. The lever actions on the pivot were revealed in all subjects. The equilibrium of moment were revealed on the pivots of 1st premolar(14 subjects), End premolar(4 subjects), and canine(2 subjects) areas. 2. The changes of loading on the TMJ according to antero-posterior positional changes of metal pivoting ball were able to recognize as follow. Compression on the TMJ was increased when the pivot moves anteriorly from the equilibrium point, and tension on the TMJ was increased when posteriorly. 3. 13 subjects were recognized their habitual chewing sides(Rights, Left8), and 7 subjects were not. During maximal biting, mandible was displaced toward their habitual chewing sides on the metal pivoting ball in the frontal plane. 4. In cephalometric analysis, the average genial angle of 20 subjects was $116.75^{\circ}$ and the average mandibular body length was 79.77mm. The equilibrium points of mandibular moment were positioned more posteriorly in the subjects having larger Genial angle than in the smaller(p<0.05). Relationships among the angle between FH plane and occlusal plane, the angle between occlusal plane and mandibular plane , and mandibular body length were not significant(p>0.05).

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.5
• /
• pp.293-301
• /
• 2020

Background: The success rate of intubation under direct laryngoscopy is greatly influenced by laryngoscopic grade using the Cormack-Lehane classification. However, it is not known whether grade under direct laryngoscopy can also affects the success rate of nasotracheal intubation using a fiberoptic bronchoscpe, so this study investigated the same. In addition, we investigated other factors that influence the success rate of fiberoptic nasotracheal intubation (FNI). Methods: FNI was performed by 18 anesthesiology residents under general anesthesia in patients over 15 years of age who underwent elective oral and maxillofacial operations. In all patients, the Mallampati grade was measured. Laryngeal view grade under direct laryngoscopy, and the degree of secretion and bleeding in the oral cavity was measured and divided into 3 grades. The time required for successful FNI was measured. If the intubation time was > 5 minutes, it was evaluated as a failure and the airway was managed by another method. The failure rate was evaluated using appropriate statistical method. Receiver operating characteristic (ROC) curves and area under the curve (AUC) were also measured. Results: A total of 650 patients were included in the study, and the failure rate of FNI was 4.5%. The patient's sex, age, height, weight, Mallampati, and laryngoscopic view grade did not affect the success rate of FNI (P > 0.05). BMI, the number of FNI performed by residents (P = 0.03), secretion (P < 0.001), and bleeding (P < 0.001) grades influenced the success rate. The AUCs of bleeding and secretion were 0.864 and 0.798, respectively, but the AUC of BMI, the number of FNI performed by residents, Mallampati, and laryngoscopic view grade were 0.527, 0.616, 0.614, and 0.544, respectively. Conclusion: Unlike in intubation under direct laryngoscopy, in the case of FNI, oral secretion and nasal bleeding had a significant effect on FNI difficulty than Mallampati grade or Laryngeal view grade.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.197-205
• /
• 2020

Korean language has the characteristics that the pronunciation of phoneme units such as vowels and consonants are fixed and the pronunciation associated with a notation does not change, so that foreign learners can approach rather easily Korean language. However, when one pronounces words, phrases, or sentences, the pronunciation changes in a manner of a wide variation and complexity at the boundaries of syllables, and the association of notation and pronunciation does not hold any more. Consequently, it is very difficult for foreign learners to study Korean standard pronunciations. Despite these difficulties, it is believed that systematic analysis of pronunciation errors for Korean words is possible according to the advantageous observations that the relationship between Korean notations and pronunciations can be described as a set of firm rules without exceptions unlike other languages including English. In this paper, we propose a visualization framework which shows the differences between standard pronunciations and erratic ones as quantitative measures on the computer screen. Previous researches only show color representation and 3D graphics of speech properties, or an animated view of changing shapes of lips and mouth cavity. Moreover, the features used in the analysis are only point data such as the average of a speech range. In this study, we propose a method which can directly use the time-series data instead of using summary or distorted data. This was realized by using the deep learning-based technique which combines Self-organizing map, variational autoencoder model, and Markov model, and we achieved a superior performance enhancement compared to the method using the point-based data.