• Journal of Mechanical Science and Technology
• /
• 제16권11호
• /
• pp.1497-1510
• /
• 2002

The onset of cavitation causes head and efficiency of a main pump to be reduced significantly and generates vibration and noise. In order to avoid these phenomena, the inlet of the pump is fitted with a special rotor called an inducer, which can operate satisfactorily with extensive cavitation. The motivation of this study is to find out cavitation modes from the inducer inlet pressure signals and event characteristics from outlet ones at various operating conditions. The cavitation modes are analyzed by using a cross-spectral density of fluctuating pressures at the inducer inlet. The time-frequency characteristics of wall pressures downstream of the inducer are presented in terms of event frequency, its duration time, and number of events by using the Choi-Williams distribution.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.179-190
• /
• 2011

The swirling flow developing in Francis turbine draft tube under part load operation leads to pressure fluctuations usually in the range of 0.2 to 0.4 times the runner rotational frequency resulting from the so-called vortex breakdown. For low cavitation number, the flow features a cavitation vortex rope animated with precession motion. Under given conditions, these pressure fluctuations may lead to undesirable pressure fluctuations in the entire hydraulic system and also produce active power oscillations. For the upper part load range, between 0.7 and 0.85 times the best efficiency discharge, pressure fluctuations may appear in a higher frequency range of 2 to 4 times the runner rotational speed and feature modulations with vortex rope precession. It has been pointed out that for this particular operating point, the vortex rope features elliptical cross section and is animated of a self-rotation. This paper presents an experimental investigation focusing on this peculiar phenomenon, defined as the upper part load vortex rope. The experimental investigation is carried out on a high specific speed Francis turbine scale model installed on a test rig of the EPFL Laboratory for Hydraulic Machines. The selected operating point corresponds to a discharge of 0.83 times the best efficiency discharge. Observations of the cavitation vortex carried out with high speed camera have been recorded and synchronized with pressure fluctuations measurements at the draft tube cone. First, the vortex rope self rotation frequency is evidenced and the related frequency is deduced. Then, the influence of the sigma cavitation number on vortex rope shape and pressure fluctuations is presented. The waterfall diagram of the pressure fluctuations evidences resonance effects with the hydraulic circuit. The influence of outlet bubble cavitation and air injection is also investigated for low cavitation number. The time evolution of the vortex rope volume is compared with pressure fluctuations time evolution using image processing. Finally, the influence of the Froude number on the vortex rope shape and the associated pressure fluctuations is analyzed by varying the rotational speed.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1099-1102
• /
• 2017

액체로켓엔진용 연료펌프의 캐비테이션 시험 중 입출구 배관과 펌프 케이싱에서 계측된 고주파 신호를 분석하였다. 각각의 데이터의 RMS 값을 캐비테이션 수에 따라 표현하였다. 측정 결과는 산화제펌프의 결과와 비교하였으며, 캐비테이션 불안정성의 영향도 검토하였다. 산화제펌프와 연료펌프 고주파 신호 사이에 유사성이 확인되었다. 또한, 캐비테이션 불안정성은 연료펌프 출구 배관 압력섭동에 영향을 주었다.

• 대한조선학회논문집
• /
• 제44권2호
• /
• pp.111-118
• /
• 2007

In order to investigate the noise characteristics of the different caviation, noise measurements were carried out in a large cavitation tunnel of the Samsuug Ship Model Basin(SSMB). The noise measurements for a 3-dimensional hydrofoil were carried out at the angle of attack of $12^{\circ}$ and $16^{\circ}$ according to the decrease in cavitation number. It is exhibited that sound pressure level(SPL) increased sharply with cavitation inception. The frequency of the noise induced by sheet cavitation was higher than that of tip vortex cavitation in the phase of cavitation inception. Within the range of the high frequency, in the case of fully developed cavitation, sheet cavitation noise was significantly increased in sound pressure level compared with tip vortex cavitation noise. In this study, the noise characteristics of the different cavitation types were considered experimentally and would be utilized as a basis for the analysis of propeller cavitation noise.

• International Journal of Fluid Machinery and Systems
• /
• 제10권3호
• /
• pp.188-196
• /
• 2017

The objective of this paper is to investigate the flow-induced vibration of a flexible hydrofoil in cavitating flows via combined experimental and numerical studies. The experiments are presented for the modified NACA66 hydrofoil made of POM Polyacetate in the closed-loop cavitation tunnel and the numerical investigations are performed using a hybrid coupled fluid structure interaction model. The results showed that with the decreasing of cavitation number, the vibration magnitude increases dramatically for the cloud cavitation and declines for the supercavitation. The cloud cavitation development strongly affects the vibration response, with the main frequency of the vibration being accordance with the cavity shedding frequency and other two frequencies corresponding to the bending and twisting frequencies.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.61-67
• /
• 2018

액체로켓엔진용 산화제펌프의 캐비테이션 시험 중 입출구 배관과 펌프 케이싱에서 계측된 고주파 신호를 분석하였다. 각각의 데이터의 RMS 값을 캐비테이션 수에 따라 표현하였다. 또한 회전수 동기 주파수와 날개 개수 성분, 캐비테이션 불안정성 주파수의 크기를 검토하였다. 입출구 배관의 압력섭동은 캐비테이션 불안정성의 영향을 받았다. 출구 배관의 신호에서는 인듀서 날개 주파수인 3x 성분이 탁월하였다. 이러한 현상은 임펠러의 날개 개수가 인듀서의 날개 개수의 배수인 것과 관계가 있는 것으로 추정된다. 케이싱에 부착된 가속도계에서도 캐비테이션 불안정성 주파수가 확인되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1093-1098
• /
• 2017

액체로켓엔진용 산화제펌프의 캐비테이션 시험 중 입출구 배관과 펌프 케이싱에서 계측된 고주파 신호를 분석하였다. 각각의 데이터의 RMS 값을 캐비테이션 수에 따라 표현하였다. 회전수 동기 주파수와 날개 개수 성분, 캐비테이션 불안정성 주파수의 RMS를 계산하였다. 입구 배관의 압력섭동은 캐비테이션 불안정성의 영향을 받았다. 출구 배관의 경우 3x 성분이 탁월하였는데, 인듀서에서 발생한 3x 성분이 임펠러에서 증폭된 결과로 해석된다. 케이싱에 부착된 가속도계에서도 캐비테이션 불안정성에 해당하는 주파수가 확인되었다.

• 한국유체기계학회 논문집
• /
• 제8권1호
• /
• pp.23-29
• /
• 2005

Steady and unsteady cavitation characteristics of turbopump inducer were investigated in this paper. To investigate the effect of blade angle on the inducer performance, three inducers with inlet tip blade angle of $7.8^{\circ},\;7.0^{\circ},\;6.1^{\circ}$, respectively, were tested. For $7.8^{\circ},\;7.0^{\circ}$ inducers in the non-cavitating condition, head decreased linearly with flow rate, but head-flow rate curve had a dip at the flow coefficient ${\psi}=0.065$ for $6.1^{\circ}$ inducer. Attached cavitation and cavitation surge were found in the $7.8^{\circ},\;7.0^{\circ}$ inducers in the cavitation tests. During the attached cavitation one cell rotated at the same rotational speed as that of the inducer. The cavitation surge did not rotate and the oscillating frequency was $7{\sim}20\;Hz$. From the curve of the critical cavitation number versus flow rate, it was found that the steady cavitation performance of $6.1^{\circ}$ inducer was much lower than that of $7.8^{\circ},\;7.0^{\circ}$ inducers.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.333-339
• /
• 2003

Steady and unsteady cavitation characteristics of turbopump inducer were investigated in this paper. To see the effect of blade angle on the inducer performance, three inducers with inlet tip blade angle of $7.8^{\circ},\;7.0^{\circ},\;6.1^{\circ}$, respectively, were tested. For $7.8^{\circ},\;7.0^{\circ}$ inducers in the non-cavitating condition, head decreased linearly with flow rate, but head-flow rate curve had a dip at the flow coefficient ${\Phi}=0.065\;for\;6.1^{\circ}$ inducer. Rotating cavitation and cavitation surge were found in the $7.8^{\circ},\;7.0^{\circ}$ inducers in the cavitation tests. During the rotating cavitation one cell rotated at the same rotational speed as that of the inducer. The cavitation surge did not rotate and the oscillating frequency was $7{\sim}20\;Hz$. From the curve of the critical cavitation number versus flow rate, it was found that the steady cavitation performance of $6.1^{\circ}$ inducer was much lower than that of $7.8^{\circ},\;7.0^{\circ}$ inducers.

• 대한조선학회논문집
• /
• 제31권1호
• /
• pp.84-93
• /
• 1994

본 연구에서는 NACA0012단면을 갖는 타원형날개끝 캐비테이션과 유기소음특성에 미치는 표면거칠기의 영향이 실험적으로 조사되었다. 사용한 표면거칠기는 조도 $200{\mu}m$의 입자로서, 날개끝 3cm 구간에 부착하였다. 또한 날개끝과 앞날에 각각 3cm의 거칠기를 준 경우도 별도로 조사되었다. 캐비테이션 발생시험 결과 캐비테이션 초기발생위치는 실험한 받음각 범위에서 날개끝으로부터 대략 1/2 코오드정도 후류이며, 캐비테이션 수가 감소함에 따라 변화하는 형상을 보였다. 날개끝 캐비테이션에 의한 소음은 주파수 3-50kHs사이의 비교적 고주파수에서 음압이 증가하는 양상을 보였으나, 더 낮은 캐비테이션수에서 날개 앞날 캐비테이션으로 확장되면 전 주파수 범위에 걸쳐서 소음이 증가하었다. 캐비테이션과 소음발생은 표면거칠기가 증가할때 개선되는 경향을 보였으나 그 차이는 크지않았다. 날개 앞날과 끝날에 거칠기를 준 경우가 낮은 캐비테이션수에서 다소 유리한 캐비테이션 특성을 보여준 반면 양력-항력비의 감소에 따른 문제점도 지적되었다.