Experimental Study on the Unsteady Cavitation of Turbopump Inducer

터보펌프 인듀서의 비정상 캐비테이션에 관한 실험적 연구

  • 홍순삼 (한국항공우주연구원 터보펌프그룹) ;
  • 김진선 (한국항공우주연구원 터보펌프그룹) ;
  • 최창호 (한국항공우주연구원 터보펌프그룹) ;
  • 김진한 (한국항공우주연구원 터보펌프그룹)
  • Published : 2003.12.05

Abstract

Steady and unsteady cavitation characteristics of turbopump inducer were investigated in this paper. To see the effect of blade angle on the inducer performance, three inducers with inlet tip blade angle of $7.8^{\circ},\;7.0^{\circ},\;6.1^{\circ}$, respectively, were tested. For $7.8^{\circ},\;7.0^{\circ}$ inducers in the non-cavitating condition, head decreased linearly with flow rate, but head-flow rate curve had a dip at the flow coefficient ${\Phi}=0.065\;for\;6.1^{\circ}$ inducer. Rotating cavitation and cavitation surge were found in the $7.8^{\circ},\;7.0^{\circ}$ inducers in the cavitation tests. During the rotating cavitation one cell rotated at the same rotational speed as that of the inducer. The cavitation surge did not rotate and the oscillating frequency was $7{\sim}20\;Hz$. From the curve of the critical cavitation number versus flow rate, it was found that the steady cavitation performance of $6.1^{\circ}$ inducer was much lower than that of $7.8^{\circ},\;7.0^{\circ}$ inducers.

Keywords