• Journal of the Korean Chemical Society
• /
• v.42 no.4
• /
• pp.383-390
• /
• 1998

The interaction of phenoxide anion with several cationic surfactant micelles (DTAB, TTAB, CTAB, CDEAB, and CTAC) was studied by UV/Vis spectrophotometric method. The solubilization constants of phenoxide anion into the cationic micellar phase and the critical micelle concentration of these surfactants in the presence of the phenoxide anion could be determined from the absorbance changes. The measured solubilization constants were changed according to the following order: $K_s(CTAC)>K_s(CDEAB)>K_s(CTAB)>K_s(TTAB)>K_s(DTAB).$ Effects of salts(NaCl and NaBr) and n-alcohols(butanol, pentanol, and hexanol) on the solubilization of phenoxide anion by the TTAB system have been also measured and analyzed. There was a great decrease of solubilization constant and CMC with these additives. The standard Gibbs free energy, enthalpy, and entropy changes for the solubilization of phenoxide anion by the TTAB system were calculated from the temperature dependence of $K_s$ values.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.1
• /
• pp.27-34
• /
• 2017

In this study, desorption characteristics of Cs from clay according to the hydrophobic alkyl chain length of the cationic surfactant were investigated. Alkyltrimethylammonium bromide was used as a cationic surfactant, and the length of the hydrophobic alkyl chain of the cationic surfactant was varied from -octyl to -cetyl. The adsorbed amount of the cationic surfactant on montmorillonite increased with the length of the hydrophobic alkyl chain, and intercalation of the cationic surfactant into the clay interlayer increased the interlayer distances. The Cs removal efficiency was also enhanced with increasing alkyl chain length, and the cationic surfactant with the cetyl group showed a maximum Cs removal efficiency of $992{\pm}2.9%$.

• Fashion & Textile Research Journal
• /
• v.16 no.2
• /
• pp.333-338
• /
• 2014

This study identifies the effects of sodium sulfate and surfactants in the papain treatment of wool fabrics using L-cysteine and EDTA as activators. The research method involves the use of 2% L-cysteine and 7% EDTA as activators at optimal conditions, papain treatment of wool fabrics with the joint use of sodium sulfates and surfactants, and measurements of the weight loss rate, tensile strength, and whiteness. Results showed that for both 2% L-cysteine and 7% EDTA, the maximum papain activity appeared at 0.5% sodium sulfate concentration. In both cases, the papain activity was enhanced at sodium sulfate concentrations lower than 0.5%. In contrast, the papain activity declined at sodium sulfate concentrations higher than 0.5%. The joint use of EDTA with 0.5% sodium sulfate was proven to be very effective in improving the papain activity. The joint use of 2% L-cysteine with 0.5% sodium sulfate appeared slightly effective in improving the activity but resulted in excessive decrease in the tensile strength and whiteness, compared to improvement in the activity. The joint use of surfactants, in the case of L-cysteine, interrupted the papain activity and decreased the tensile strength regardless of the surfactant type and concentration. In the case of EDTA, however, the joint use with 0.1-5% non-ionic surfactants, 0.1-0.5% anionic surfactants, and 0.1% cationic surfactant appeared to improve the papain activity. The maximum papain activity was observed when 0.1% of surfactant was used, regardless of the surfactant type. The nonionic surfactant was the most effective in improving the papain activity.

• Macromolecular Research
• /
• v.13 no.5
• /
• pp.385-390
• /
• 2005

The electrospinning process is a fascinating method to fabricate small nanosized fibers of diameter several hundred nanometers. Surfactant-polymer solutions were prepared by adding poly(vinyl alcohol) (PVOH) to distilled water with cationic, anionic, amphoteric, and non-ionic surfactants. Average diameter of the electrospun PVOH fibers prepared from PVOH solution was over 300 nm, and was decreased to 150 nm for the mixture of PVOH/amphoteric surfactant. To explain the formation of ultra fine fiber, the characteristic properties in a mixture of PVOH/surfactant such as surface tension, viscosity, and conductivity were determined. In this paper, the effect of interactions between polymers with different classes of surfactants on the morphological and mechanical properties of electrospun PVOH nonwoven mats was broadly investigated.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.250-259
• /
• 2020

The solubilization constant (K_s) was determined by the UV-Vis method to investigate the interaction between organic matter (solubilized substance) and surfactant in solubilization. Solubilization constants and thermodynamic functions, according to the hydrophobic interaction between organic mater (4-alkylanilines with different alkyl substituent length) and cationic surfactants (DTAB, TTAB, and CTAB, having different hydrophobic lengths), were measured and calculated at various temperatures and compared with each other. As a result, the hydrophobic interactions between organic matters and cationic micelles increased with increasing the chain length of solute's substituent as well as surfactant's hydrophobe. However, the hydrophobic effect by the alkyl substituent of organic matter was greater than the hydrophobic effect by the surfactant. In addition, the results of the calculated thermodynamic functions showed that 4-alkylaniline was solubilized at the deep place in the micelle and its solubilization was greatly dependent on both the hydrophobic effects of organic matter and surfactant. At the calculated iso-structural temperature, the difference between the maximum and minimum values was less than 1K within the experimental conditions.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.9
• /
• pp.2051-2056
• /
• 2009

The rate constants of alkaline fading of malachite green ($MG^+$) was measured in the presence of nonionic (TX-100), cationic (DTAB) and anionic (SDS) surfactants. This reaction was studied under pseudo-first-order conditions at 283∼303 K. The rate of fading reaction showed noticeable dependence on the electrical charge of the used surfactants. It was observed that the reaction rate constants were increased in the presence of TX-100 and DTAB and decreased in the presence of SDS. According to Hughs-Ingold rules for nucleophilic substitution reactions, the electric charge of MG/surfactant compound along with decrease in dielectric constant of $MG^+$ micro-environment in this compound varies the rate of fading reaction. Binding constants of surfactant molecules to $MG^+$ were calculated using cooperativity, pseudo-phase ion exchange and classical models and the related thermodynamic parameters were obtained by classical model. The results show that the binding of $MG^+$ to TX-100 is exothermic and binding of $MG^+$ to DTAB and SDS in some concentration ranges of the used surfactants is endothermic and in the other ones is exothermic.

• Korea-Australia Rheology Journal
• /
• v.14 no.1
• /
• pp.1-9
• /
• 2002

Steady and dynamic shear properties of two hydrophobically modified alkali soluble emulsions (HASE), NPJI and NPJ2, were experimentally investigated. At the same polymer concentration, NPJ1 is appreciably more viscous and elastic than NPJ2. The high hydrophobicity of NPJ1 allows hydrophobic associations and more junction sites to be created, leading to the formation of a network structure. Under shear deformation, NPJ1 exhibits shear-thinning behaviour as compared with Newtonian characteristics of NPJ2. NPJ1 and NPJ2 exhibit a very high and a low level of elasticity respectively over the frequency range tested. For NPJ1, a crossover frequency appears, which is shifted to lower frequencies and hence, longer relaxation times, as concentration increases. Three different surfactants anionic SDS, cationic CTAB, and non-ionic TX-100 were employed to examine the effects of surfactants on the rheology of HASE. Due to the different ionic behaviour of the surfactant, each type of surfactant imposed different electrostatic interactions on the two HASE polymers. In general, at low surfactant concentration, a gradual increase in viscosity is observed until a maximum is reached, beyond which a continuous reduction of viscosity ensues. Viscosity development is a combined result of HASE-surfactant interactions, accompanied by constant rearrangement of the hydrophobic associative junctions, and electrostatic interactions.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.726-736
• /
• 2004

In this paper, kinetics of reaction between Bromophenol blue (BPB) and $OH^-$, called fading, has been studied through a spectrophotometric method in the presence of nonionic Triton X-100 (TX-100), anionic sodium dodecyl sulfate (SDS) and cationic dodecyl trimethylammonium bromide (DTAB) surfactants. The influence of changes in the surfactant concentration on the observed rate constant was investigated. The results are treated quantitatively by pseudophase ion-exchange (PPIE) model and a new simple model called "classical model". The binding constants of BPB molecules to the micelles and free molecules of surfactants, their stoichiometric ratios and thermodynamic parameters of binding have been evaluated. It was found that SDS has nearly no effect on the fading rate up to 10 mM, whereas TX-100 and DTAB interact with BPB which reduce the reaction rate. By the use of fading reaction of BPB, the binding constants of SDS molecules to TX-100 micelles and their Langmuir and Freundlich adsorption isotherms were obtained and when mixtures of DTAB and TX-100 were used, no interaction was observed between these two surfactants.

• Elastomers and Composites
• /
• v.44 no.2
• /
• pp.143-149
• /
• 2009

In this study, asphalt emulsion was manufactured by phase inversion emulsification method with nonionic surfactants(Span 80, Span 60, Tween 80, and Tween 60), anionic surfactant(SLS) and cationic surfactant(Imidazole) in different feeding ratio to make up for the week points of asphalt. Its stabilization was carefully investigated with respect to droplet size, viscosity, zeta potential, and water-proofing property. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of the asphalt emulsion was good. As the amount of the mixed surfactant was increased, the droplet size of asphalt emulsion were decreased, while the viscosity and zeta potential were increased. When the surfactants mixed with nonionic and anionic surfactant were used into the asphalt, a stabilization of asphalt emulsion was good.

• Applied Chemistry for Engineering
• /
• v.10 no.7
• /
• pp.1096-1098
• /
• 1999

MCM-41 type spherical mesoporous silica material was synthesized, under basic conditions, in the presence of cationic surfactant as templating species. The cationic surfactants used in this experiment were octyltrimethylammonium bromide, dodecyltrimetylammonium bromide, cetyltrimethylammonium bromide, octadecyltrimethyammonium bromide and cetylpyridium bromide. Specific surface area of spherical MCM-41 was as high as $1500m^2/g$ and the pore size decreased with increasing alkyl chain length of surfactant.