• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.47-47
• /
• 2011

최근 m-Aramid 섬유의 염색에 대한 연구가 진행되면서 기존의 원착법 및 초고온고압법 등 상업성이 낮거나 제약이 많았던 염색법에서 차츰 cationic dye를 이용한 염색법이 상용화되고 있다. m-Aramid 섬유는 amide기의 분자 간 수소결합으로 인하여 결정화도를 증가시킴으로서 고강도, 고탄성의 특성을 가질 수 있지만, 강력한 분자구조와 고결정성의 치밀구조로 인하여 염료가 섬유의 분자구조 내부로 확산, 염착되기 어려운 단점을 가지기도 한다. 따라서 m-Aramid 섬유를 침염법으로 염색 시, 섬유의 치밀구조를 이완시켜줄 수 있는 swelling agent가 중요하게 작용한다. 본 연구에서는 cationic dye를 이용하여 swelling agent의 영향성을 살펴보았다. 사용된 시료는 100% m-Aramid 섬유이며, C.I. Basic Yellow 28, Red 46, Blue 54를 사용하여, 욕비 1:10, $NaNO_3$ 7g/l의 조건으로 $130^{\circ}C{\times}60$분간 염색하였다. 이때 사용된 Swelling agent는 두 가지로 각각 1-phenoxypropan-2-ol(S1)과 N-methyl formanilide(S2)를 주성분으로 한다. 염색 시 염료의 농도는 0.5~7% o.w.f.이며, 염색 전 후 염욕을 UV-VIS을 통해 absorbance값을 측정하여 산출한 염착율과, CCM을 사용하여 최대흡수 파장에서 산출 된 K/S값을 비교 고찰 하였다. 각각의 염색물을 비교한 결과 Red 염료를 제외한 yellow 및 blue 모두 3% o.w.f. 염료농도까지 90% 이상의 흡착율을 보였으며, S1에 비해 S2의 경우 염착율이 근소하게 높은 결과를 보였다. 반면 K/S 값을 비교해보면, S2를 사용하였을 때 10%~60% 높은 K/S값을 보였다. 염착율은 비슷하지만 K/S값의 차이를 보이는 이유는 염색이 끝난 후 수세과정에서 섬유표면에 미고착된 염료들이 빠져나가는 것으로, 이를 통해 S2의 경우 섬유의 내부로 염료를 잘 고착시켜 줌으로서 수세안정성이 S1에 비에 우수한 결과를 보인 것으로 고찰된다.

• 한국환경보건학회지
• /
• 제40권2호
• /
• pp.137-146
• /
• 2014

Objectives: Feasibility of electrochemical oxidation of the aqueous non-biodegradable wastewater such as cationic dye Rhodamine B (RhB) has been investigated in an electrochemical reactor with solid polymer electrolyte (SPE). Methods: Nafion 117 cationic exchange membrane as SPE has been used. Anode/Nafion/cathode sandwiches were constructed by sandwiching Nafion between two dimensionally stable anodes (JP202 electrode). Experiments were conducted to examine the effects of applied current (0.5~2.0 A), supporting electrolyte type (0.2 N NaCl, $Na_2SO_4$, and 1.0 g/L NaCl), initial RhB concentration (2.5~30.0 mg/L) on RhB and COD degradation and $UV_{254}$ absorbance. Results: Experimental results showed that an increase of applied current in electrolysis reaction with solid polymer electrolyte has resulted in the increase of RhB and $UV_{254}$ degradation. Performance for RhB degradation by electrolyte type was best with NaCl 0.2 N followed by SPE, and $Na_2SO_4$. However, the decrease of $UV_{254}$ absorbance of RhB was different from RhB degradation: SPE > NaCl 0.2 N > $Na_2SO_4$. RhB and $UV_{254}$ absorbance decreased linearly with time regardless of the initial concentration. The initial RhB and COD degradation in electrolysis reaction using SPE showed a pseudo-first order kinetics and rate constants were 0.0617 ($R^2=0.9843$) and 0.0216 ($R^2=0.9776$), respectively. Conclusions: Degradation of RhB in the electrochemical reactor with SPE can be achieved applying electrochemical oxidation. Supporting electrolyte has no positive effect on the final $UV_{254}$ absorbance and COD degradation. Mineralization of COD may take a relatively longer time than that of the RhB degradation.

• 한국염색가공학회지
• /
• 제28권2호
• /
• pp.63-69
• /
• 2016

Poly(butylene terephthalate)(PBT) surface was modified by UV/ozone irradiation and the effect of UV energy on the surface properties of the irradiated PBT films were characterized by the reflectance, surface roughness, contact angles, ESCA, and ATR analyses of the film surface. The surface reflectance, at the short wavelength of visible spectrum of particularly 400nm, decreased with increasing UV energy. And the irradiation roughened the film surface uniformly in the nano scale. The maximum surface roughness increased from 110nm for the unirradiated sample to 303nm at the UV energy of $10.6J/cm^2$. The surface energy of PBT film increased from $50.5mJ/m^2$ for the unirradiated PBT to $58.8mJ/m^2$ at the irradiation of $21.2J/cm^2$. The improvement in hydrophilicity was caused by the introduction of polar groups containing oxygens such as C-O and C=O bonds resulting in higher $O_{1s}/C_{1s}$. The increased dyeability of the modified film to cationic dyes may be resulted from the photochemically introduced anionic and dipolar dyeing sites on the PBT films surfaces.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3184-3190
• /
• 2012

Color impurity in industrial effluents pose a significant risk to human health and the environment, so much effort has been expended to degrade them using various methods, including the use of clay minerals as adsorbent. The purpose of this study was to advance understanding of the mechanisms for the removal of methylene blue (MB) from aqueous solutions onto montmorillonite as an adsorbent. Preliminary experiments showed that montmorillonite was effective for this purpose and adsorption equilibrium could be reached in about 24 h. Adsorption capacity of the clay decreased with increase in temperature and ionic strength, and increased with in pH. The fitness of equilibrium data to common isotherm equations such as the Langmuir, Freundlich, Elovich, Temkin and Dubinin-Radushkevich were tested. The Langmuir equation fitted to equilibrium data better than all tested isotherm models. Thermodynamic activation parameters such as ${\Delta}G^0$, ${\Delta}S^0$ and ${\Delta}H^0$ were also calculated and results were evaluated. As result montmorillonite clay was found as effective low cost adsorbent for removal of cationic dyes from waste waters.

• 한국염색가공학회지
• /
• 제25권1호
• /
• pp.25-29
• /
• 2013

Poly ketone (PK) was photo-oxidized by UV/ozone irradiation and the effect of UV energy on the surface properties of the UV-irradiated PK film was investigated by the measurement of reflectance, surface roughness, contact angles, ESCA, and ATR. Reflectance, particularly at the wavelength of 380nm, decreased with increasing UV energy. And the irradiation produced nano-scale roughness on the surface uniformly. The maximum surface roughness increased from 25.3nm for the unirradiated sample to 104.9nm at the irradiation of $42.4J/cm^2$. The improvement in hydrophilicity was caused by the introduction of polar groups such as C-O and C=O bonds resulting in higher $O_{1s}/C_{1s}$. The surface energy of PK film increased from $43.3mJ/m^2$ for the unirradiated sample to $71.9mJ/m^2$ at the irradiation of $31.8J/cm^2$. The zeta potential of the UV-irradiated PK decreased with increased UV energy and the dyeability to cationic dyes increased accordingly, resulting from the photochemically introduced anionic and dipolar dyeing sites on the PK films surfaces.

• 한국염색가공학회지
• /
• 제14권2호
• /
• pp.94-94
• /
• 2002

A number of studies have been introduced on the use of quaternary cationic agents having various reactive groups, which can improve the substantivity of anionic dyes, specially direct dyes, towards cotton. In the case of direct dyes, it is well known that they are widely used due to their convenience to apply and low cost, whilst they display poor levels of fastness properties to washing. Thus many applications using direct dyes in the textile fields have been still enjoyed in the areas where a higher level of wet fastness is specially not required. This work herein comprises that in order to improve the substantivity of direct dyes towards cotton, cellulose-reactive allylamine polymer namely, triazinyl N,N′-dimethyl-N,N′-diallyl ammonium chloride was prepared and treated onto cotton to provide cationic properties within substrates. This application showed that even low concentration of electrolytes being present, the direct dyes were exhausted well on the cationized cotton and that the rate of dye uptake by treated cotton was faster than that of untreated sample. Furthermore the antimicrobial properties were observed from the cationized samples.

• 한국염색가공학회지
• /
• 제19권6호
• /
• pp.28-34
• /
• 2007

The optical and physical properties of alkyl-substituted anthraquinoid dyes were investigated in terms of dyeing of pure polypropylene fiber. The length of alkyl substituents of the dyes did not affect the molar extinction coefficient and maximum absorption wavelength of them. The use of a double-tailed cationic surfactant, didodecyldimethylammonium bromide(DDDMAB), could make the hydrophobic dyes dispersed in water effectively. As the amount of DDDMAB increased, the average particle size of dye dispersion decreased. Maximum color strength of the fabrics was shown in the case that 1.5 molar ratio of DDDMAB was used. As for the fastness properties, commercially acceptable result was obtained in general.

• Advances in environmental research
• /
• 제6권2호
• /
• pp.113-125
• /
• 2017

Santa Barbara Amorphous-15(SBA-15) nanoparticles were utilized as the inexpensive and effective adsorbents to remove methylene blue dye from the aqueous solution.SBA-15 was created by Zhao et al method. Infrared spectroscopy, X-ray diffraction and scanning electron microscopy (SEM) were used for the evaluated physical properties of SBA-15. The results of diffraction X-ray indicated that was the crystalline structure for it. Also IR spectroscopy indicated was a silica the whole structure of the groups and SEM image verify the structure of relatively identical particles size of SBA-15. Factors affecting adsorption including the amounts of adsorbent, pH and contact time were investigated by a SBA-15 nanomaterial design. The extent of dye removal enhanced with increasing initial dye concentration and pH from 4 to 10. The higher percentage adsorption were obtained under optimum conditions of variables (sorbent dose of 200 mg/liter, initial MB concentration 10 mg/liter, initial pH of 10 and temperature of $25^{\circ}C$). Maximum adsorption happened after the 2 hour and the kinetic processes of the dyes adsorption were described by applying the pseudo-first-order and the pseudo-second-order and the relatively High correlation with the kinetic Ellovich models. It was found that the pseudo-second-order models kinetic equation described the data of dye adsorption with a good correlation (R2>0.999) which indicated chemisorption mechanism. Freundlich and Langmuir adsorption models were investigated in conditions of variables (adsorbent dose 0.01 gr/liter, MB concentration 10, 20, 30 mg/liter, pH of 4, 7, 10, contact time 90 min and temperature of $27^{\circ}C$). The adsorption data were represented by Langmuir isotherm model. These values are higher than the adsorption capacities of some other adsorbents that have recently been published in the literature.

• Bulletin of the Korean Chemical Society
• /
• 제28권4호
• /
• pp.667-674
• /
• 2007

Phase behavior for the mixed aqueous surfactant systems of cationic octadecyl trimethyl ammonium chloride (OTAC)/anionic ammonium dodecyl sulfate (ADS)/water was examined. Below the total surfactant concentrations of 1.5 m molal, mixed micelles were formed. At the total surfactant concentrations higher than 1.5 m molal, there appeared a region where mixed micelles and vesicles coexist. As the surfactant concentration increased, the systems looked very turbid and much more vesicles were observed. The vesicles were spontaneously formed in this system and their existence was observed by negative-staining transmission electron microscopy (TEM), small-angle neutron scattering (SANS) and encapsulation efficiency of dye. The vesicle region was where the molar fraction α of ADS to the total mixed surfactant was from 0.1 to 0.7 and the total surfactant concentration was above 5 × 10-4 molality. The size and structure of the vesicles were determined from the TEM microphotographs and the SANS data. Their diameter ranged from 450 nm to 120μm and decreased with increasing total surfactant concentration. The lamellar thickness also decreased from 15 nm to 5 nm with increasing surfactant concentration and this may be responsible for the decrease in vesicle size with the surfactant concentration. The stability of vesicles was examined by UV spectroscopy and zeta potentiometry. The vesicles displayed long-term stability, as UV absorbance spectra remained unchanged over two months. The zeta potentials of the vesicles were large in magnitude (40-70 mV) and the observed longterm stability of the vesicles may be attributed to such high ζ potentials.

• 한국염색가공학회지
• /
• 제8권2호
• /
• pp.64-70
• /
• 1996

Wool yarns were treated in dimethylformamide solutions containing various concntrations of three dibasic acid anhydrides: succinic, itaconic, and phthalic arthydrides in various conditions. The structurl aspects of these dibasic acid anhydries are different: succinic, itaconic, and phthalic acid arthydrides have saturated aliphatic ethylene, unsaturated aliphatic vinyl and aromatic phenyl one groups, respectively. The properties of acylated wool keratin are as follows: Decreasing amino group and increasing carboxyl group by acylation lowered the hydrophilic property, and then moisture regain, and decreased acid dye uptake and enhanced cationic dye uptake of wool keratin. In the case of phthalic acid anhydries, in spite of lowest acyl content, the minimum of moisture regain was resulted from the bulk benzen ring, occuping much more voids on wool keratin molecules than other reagents. Acid solubility was increased by the decrease of amino group and hydrogen bonding by acylation. Alkali solubility was also increased formation of new amide group on the side chain of keratin, which can be degraded easily by alkali. In the case of phthalic acid anhydride, the relative high solubility was resulted from the much higher molecular weight of dissolved fractions. The surface of wool keratin was not damaged by treatment with any acylating agent.