• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.225-232
• /
• 1997

고율 방전용 Li/SOCl2전지의 성능은 카본 양극에 의해 크게 영향을 받는다. 전지가 방전되는 동안 SOCl2의 환원은 다공성 카본 양극에서 일어나고 기공내에 방전반응 생성물-주로 LiCl-이 석출된다. 이러한 현상으로 양극 표면이 부동화되어 전지의 성능이 제한된다. 양극이 성능을 향상시키기 위해 양극이 표면밀도와 두께를 각각 변화시켜 양극 반쪽셀 정전류 방전실험(50mA/$\textrm{cm}^2$)을 행하였다. 실험 결과 0.04g/$\textrm{cm}^2$, 두께 1.4mm의 양극이 가장 좋은 특성을 보였다. 표면 밀도가 0.04 g/$\textrm{cm}^2$로 일정하고 두께가 0.8mm, 1.4mm의 양극에서 분극현상은 두께가 두꺼운 1.4mm양극에서 감소하였으며 방전경과시간과 방전용량(Ah/$\textrm{cm}^2$)이 증가하였다. 두 양극에 대한 기공률 측정 결과 두께 1.4mm양극이 두께 0.8mm양극보다 전체 기공부피가 크고 전지성능과 연관되는 mesopore(0.05 $\mu$m~0.5$\mu$m)와 macropore(>0.5$\mu$m)부피가 더 증가하였다. 방전 후 카본 양극의 표면분석 결과 등방결정과 판상구조 집합체 형태의 LiCl과 소량의 S를 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제29권3호
• /
• pp.267-273
• /
• 2018

From the experiments of various temperature and gas compositions, total resistance which is composed of ohmic resistance, anode resistance, cathode resistance and Nernst loss was calculated wit simple assumption. In this work, the anode and the cathode resistance was modelled with new equation which can account for the correlation between the operating temperature and the gas composition. The proposed model can predict the resistance with maximum error of 2.57% and employed in the simulation of molten carbonate fuel cells.

• 한국융합학회논문지
• /
• 제8권11호
• /
• pp.307-312
• /
• 2017

산업계에서는 희생양극의 원리를 이용한 아연도금이 사용되고 있다. 순수아연도금보다 내식성을 증가시키기 위한 방안의 하나로 Zn-Ni 합금도금이 개발되었다. 합금 도금층은 순 아연 도금층에 비하여 4-5배의 내식성을 가지고 있어서 도금 단가가 높음에도 불구하고 고내식성을 요구하는 자동차 부품 등에 적용이 증가되고 있다. Zn-Ni 합금도금액은 황산욕, 염화욕, 알칼리욕과 암모니아욕 등이 사용되고 있다. 여기에서는 염화욕에서 합금도금의 조성에 미치는 전해조건의 영향을 조사하였다. 그 결과는 음극 과전압 및 확산계수에 의해 설명하였다. 일반적으로 음극의 과전압이 증가함에 따라 활성화분극보다 농도분극이 중요하게 된다. 농도분극은 확산 층 내의 원소 확산에 의해 결정된다. 즉 음극의 과전압이 증가함에 따라 확산계수가 큰 Zn 함량이 증가한다.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.278-282
• /
• 2014

Due to high ionic conductivity and favorable oxygen electrocatalysis, doped $Bi_2O_3$ systems are promising candidates as solid oxide fuel cell cathode materials. Recently, several researchers reported reasonably low cathode polarization resistance by adding electronically conducting materials such as (La,Sr)$MnO_3$ (LSM) or Ag to doped $Bi_2O_3$ compositions. Despite extensive research efforts toward maximizing cathode performance, however, the inherent catalytic activity and electrochemical reaction pathways of these promising materials remain largely unknown. Here, we prepare a symmetrical structure with identically sized $Y_{0.5}Bi_{1.5}O_3$/LSM composite electrodes on both sides of a YSZ electrolyte substrate. AC impedance spectroscopy (ACIS) measurements of electrochemical cells with varied cathode compositions reveal the important role of bismuth oxide phase for oxygen electrocatalysis. These observations aid in directing future research into the reaction pathways and the site-specific electrocatalytic activity as well as giving improved guidance for optimizing SOFC cathode structures with doped $Bi_2O_3$ compositions.

• 전기화학회지
• /
• 제12권1호
• /
• pp.81-87
• /
• 2009

리튬 이차전지의 양극 활물질인 스피넬 망간산화물(${LiMn_2}{O_4}$, LMO) 표면에 ITO(indium tin oxide)를 코팅하여, 고온($55^{\circ}C$)에서 사이클 수명과 속도특성을 조사하였다. 정전류 정전압 충방전 실험의 결과, ITO가 코팅되지 않은 LMO 전극의 표면에서 고온 고전압 조건에서 전해질이 분해하여 피막이 형성되고, 이 피막의 저항으로 인하여 분극현상(polarization)이 심하게 발생하였다. 그러나, ITO가 2 mol% 이상 코팅된 LMO의 경우 양극 활물질과 전해질과의 직접적인 접촉 면적이 줄어들어, 전해질의 분해가 감소하였고 내부저항에 의한 분극 현상 또한 현저히 감소하였다. 이러한 결과, ITO가 코팅된 전극의 충방전에 따른 가역성이 코팅되지 않은 LMO에 비해 크게 향상되었다. 적외선 분광기를 이용하여 ITO가 코팅된 LMO 표면에서 피막형성이 감소함을 확인하였다. ITO의 코팅으로 LMO 전극의 속도특성도 크게 향상되었는데, 이는 저항이 큰 피막형성이 억제된다는 점과 ITO의 전기전도도가 크다는 사실로 설명할 수 있다.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.77-82
• /
• 2015

To increase the performance of solid oxide fuel cell operating at intermediate temperature ($600^{\circ}C{\sim}800^{\circ}C$), $Sm_{0.2}Ce_{0.8}O_2$ (SDC) thin layer was applied to the $La_{0.8}Sr_{0.2}Mn_{0.8}Cu_{0.2}O_3$ (LSMCu) cathode by sol-gel coating method. The SDC was employed as a diffusion barrier layer on the yttria-stabilized zirconia(YSZ) to prevent the interlayer by-product formation of $SrZrO_3$ or $La_2Zr_2O_7$. The by-products were hardly formed at the electrolyte-cathode interlayer resulting to reduce the cathode polarization resistance. Moreover, SDC thin film was coated on the cathode pore wall surface to extend the triple phase boundary (TPB) area.

• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.358-363
• /
• 2018

To improve the polarization property of cathodes, which is the main factor limiting the performance of protonic ceramic fuel cells (PCFCs), $K_2NiF_4-type$ $Pr_2NiO_{4+{\delta}}$, which is expected to exhibit a triple conducting property (proton, oxygen ion, and hole conductions) was applied to PCFCs and its properties were investigated. Low-temperature microwave heat-treatment was used to achieve both sufficient interface adhesion between the electrolyte and the cathode layers and suppression of the secondary phase formation due to migration of elements such as barium and cerium. Through this fabrication method, a high performance of $0.82W{\cdot}cm^{-2}$ and low ohmic resistance of $0.06{\Omega}{\cdot}cm^2$ were obtained in an $Ni-BaCe_{0.55}Zr_{0.3}Y_{0.15}O_{3-{\delta}}$ | $BaCe_{0.55}Zr_{0.3}Y_{0.15}O_{3-{\delta}}$ | $Pr_2NiO_{4+{\delta}}$ single cell at $650^{\circ}C$. This result verifies that the $K_2NiF_{4+{\delta}}-type$ cathode shows good chemical compatibility which, in turn, will make it a potent candidate as a PCFC cathode.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.364-367
• /
• 2006

The decrease of polarization resistance in cathode is the key point for intermediate temperature SOFC(Solid Oxide Fuel Cell). In this study, the Influence of Co substitution in B-site at perovskite PSCM (Pr0.3Sr0.7CoxMn(1-x)) was investigated. The PSCM series exhibits excellent MIEC(Mixed ionic Electronic Conductor) properties. The ASR(Area Specific Resistance) of PSCM3773 was $0.174{\Omega}cm^2\;at\;700^{\circ}C$. The activation energy of PSCM3773 was also lower than other compositions of PSCM. The ASR values were increased gradually during the thermal cycling test of PSCM37773 due to the delamination between electrolyte and cathode materials.

• 한국표면공학회지
• /
• 제12권3호
• /
• pp.161-166
• /
• 1979

Theoretical and practical aspects are investigated for electrochemical behavious, plating processes and the structures of electrodeposit of Pb-Sn binary alloy plating through numerous literatures in this report. The anodic and cathodic electrode reaction mechanisms of Pb and Sn could co-deposit and make Pb-Sn alloy deposit from the results of cathode current density-cathode potential curves of Pb, Sn and Pb-Sn alloys in fluoborate solutions. The compositions of the best alloy plating solutions are obtained for the purpose of bearing, anticorrosion and solder plating. In general, the casting anodes of Pb-Sn alloys are used, but separated anodes of Pb and Sn pure metal are used in order to obtain the fine compositions of Pb-Sn alloy deposits. The electrodeposits of Pb-Sn alloy are in nonequilibrium state and saturated solid solutions. Thus, ${\beta}$-phase (Sn-phase) is precipitated by heat treatment. The texture and structure of the electrodeposit are associated with the surface energies of deposit lattice planes and with the cathode polarization. The electrodeposit of Pb-Sn alloy is shown as lamellar structure.

• Journal of Information Display
• /
• 제10권1호
• /
• pp.28-32
• /
• 2009

The correlation between the optical performance of the reflective polarizer, which is a key optical component for the brightness enhancement of the liquid crystal display (LCD), and the configuration of optical sheets was investigated in a direct-lit CCFL (cold-cathode fluorescent lamp) backlight. The optical gain of the reflective polarizer, the polarization state of the light emitted from each film, and the loss factor for the polarization conversion process occurring in the lower part of the backlight were determined using a phenomenological approach for the polarization recycling process. The present study suggests that the correlation between the optical performance of the brightness enhancement films and the backlight configuration should be carefully considered in the optimization of the backlight structure.