• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.773-776
• /
• 2005

In the fabrication of high performance Blue organic light emitting diode, 2-TNATA[4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB[N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (Indium Tin Oxide)/Glass substrate by vacuum evaporation. And then, Blue color emission layer was deposited using GDI602 as a host material and GDI691 as a dopant. Finally, small molecule OLED with the structure of ITO/2-TNATA/NPB/GDI602+GDI691/Alq3/LiF/Al was obtained by in-situ deposition of Alq3, LiF and Al as electron transport material, electron injection material and cathode, respectively. Blue OLED fabricated in our experiments showed the color coordinate of CIE(0.14, 0.16) and the maximum luminescence efficiency of 1.06 lm/W at 11 V with the peak emission wavelength of 464 nm.

• The Korean Journal of Ceramics
• /
• v.3 no.4
• /
• pp.245-248
• /
• 1997

Photoluminescence (PL) and cathodoluminescence (CL) characteristics of Ce-activated $Y_{2-x}Ce_xSiO_5$ have been investigated as functions of Ce concentration and firing condition. According to the X-ray, PL and CL results, $Y_2SiO_5$ is found to have two phases depending on the firing temperature. For the specimen fired above 127$0^{\circ}C$, the emission band peaked at 395nm with a shoulder at 424 nm under ultraviolet (u.v.) and cathode-ray (c.r.) excitation. However, for the specimen fired below 120$0^{\circ}C$ in air the peak was observed at 424 nm and it shifted to longer wavelength with reduction level. The reduced specimen for x=0.02 showed the brightest emission under u.v. excitation whereas under c.r. excitation the brightest emission was observed for the reduced specimen for x=0.06.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.49-52
• /
• 2009

We have investigated the effect of the surface roughness of TCO substrate on the characteristics of OLED (organic light emitting diodes) devices. In order to control the surface roughness of ITO thin films, we have processed photolithography and reactive ion etching. The micro-size patterned mask was used, and the etching depth was controlled by changing etching time. The surface morphology of the ITO thin film was observed by FESEM and atomic force microscopy (AFM). And then, organic materials and cathode electrode were sequentially deposited on the ITO thin films. Device structure was ITO/$\alpha$-NPD/DPVB/Alq3/LiF/Al. The DPVB was used as a blue emitting material. The electrical characteristics such as current density vs. voltage and luminescence vs. voltage of OLED devices were measured by using spectrometer (minolta CS-1000A). The current vs. voltage and luminance vs. voltage characteristics were systematically degraded with increasing surface roughness. Furthermore, the retention test clearly presented that the reliability of OLED devices was directly influenced with the surface roughness, which could be interpreted in terms of the concentration of the electric field on the weak and thin organic layers caused by the poor step coverage.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.25-29
• /
• 2010

We have investigated the effect of surface roughness of TCO substrate on the characteristics of OLED (organic light emitting diodes) devices. In order to control the surface roughness of AZO thin films, we have processed photo-lithography and reactive ion etching. The micro-size patterned mask was used, and the etching depth was controlled by changing etching time. The surface morphology of the AZO thin film was observed by FESEM and atomic force microscopy (AFM). And then, organic materials and cathode electrode were sequentially deposited on the AZO thin films. Device structure was AZO/${\alpha}$-NPD/DPVB/$Alq_3$/LiF/Al. The DPVB was used as a blue emitting material. The electrical characteristics such as current density vs. voltage and luminescence vs. voltage of OLED devices were measured by using spectrometer. The current vs. voltage and luminance vs. voltage characteristics were systematically degraded with increasing surface roughness. Furthermore, the retention test clearly presented that the reliability of OLED devices was directly influenced with the surface roughness, which could be interpreted in terms of the concentration of the electric field on the weak and thin organic layers caused by the poor step coverage.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.519-524
• /
• 2012

Capacitance measurements of the polymer light-emitting diodes (PLEDs) with conjugated polyelectrolyte (CPE) electron transporting layers (ETLs) provide important information of device physics for understanding the function of CPEs as ETLs, together with current density-voltage-luminescence measurements. We investigated the counterion-dependent capacitance behaviors that present a highly negative or positive capacitance at the low frequency, and suggested different carrier injection mechanisms. Capacitance model study reveals that the electron injection mechanism can be described either by the dipole alignment scheme or by electronic charge carrier accumulation at the cathode/ETL/emission layer interfaces.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.132-133
• /
• 2007

$In_xGa_{1-x}N/In_yGa_{1-y}N$ 다중 양자우물 녹색 발광 다이오드에 2차원 광자 결정을 이용하여 음극선 발광의 향상을 관찰 하였다. 정사각형 배열의 2차원 광자 결정의 주기와 격자 상수는 200/500 nm 이고 전자빔 리소그래피로 광자결정 패턴을 제작한 후, 플라즈마 건식 식각법으로 패턴을 구현하였다. 식각 시간의 차이를 둔 구현된 패턴의 홀 깊이는, 각각 ${\sim}69nm,\;{\sim}99nm,\;{\sim}173nm$ 이었다. 전계 방사 주사 현미경 측정 결과, 형성된 홀은 끝이 잘린 역전된 원뿔 모양으로 식각 되었다. 식각 된 홀의 깊이에 따라 광자 결정이 있는 부분이 없는 부분보다 최대 ${\sim}30$배 많은 광자가 검출 됨을 확인하였다.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.564-568
• /
• 1999

The 8-hydroxyquinoline Zinc(Znq2) were prepared successfully from zinc chloride and zinc acetate as two kinds of starting material. The organic electroluminescent devices(ELDs) were fabricated by the structure of ITO/TPD/Znq2/Al with N-N'-diphenyl-N-N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) which acts hole trasporting layer and bis(8-oxyquinolino) zinc(II)(Znq2) which acts as emission and electron transporting layer. EL efficiency of Znq2 prepared by heating was investigated. The 570nm of main emission peak which is yellowich green was investigated by photo luminesence(PL) and this results shows that electro luminescence(EL) is from Znq2. The V-J curve shows that carrier injection were investigated from 4V. Maximum luminance and luminance efficiency were 1600cd/$\m^2$, 0.9lm/W. From this results, the Znq2 can be one of the useful organic EL material.

• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.163-168
• /
• 2009

$Eu^{3+}$-doped $Y_2O_3$ red phosphor was synthesized in a flux method using the chemicals $Y_2O_3,\;Eu_2O_3,\;H_3BO_3$ and $BaCl_2{\cdot}2H_2O$. The effect of a flux addition on the preparation of $Y_2O_3:Eu_{3+}$ red phosphor used as a cold cathode fluorescence lamp was investigated. $H_3BO_3$ and $BaCl_2{\cdot}2H_2O$ fluxes were used due to their different melting points. The crystallinity, thermal properties, morphology, and emission characteristics were measured using XRD, TG-DTA, SEM, and a photo-excited spectrometer. Under UV excitation of 254 nm, $Eu_2O_3$ 3.7 mol% doped $Y_2O_3$ exhibited a strong narrow-band red emission, peaking at 612 nm. From this result, the phosphor synthesized by firing $Y_2O_3$ with 3.7 mol% of $Eu_2O_3$, 0.25 mol% of $H_3BO_3$ and 0.5 mol% of $BaCl_2{\cdot}2H_2O$ fluxes at $1400^{\circ}C$ for 2 hours had a larger particle size of $4{\mu}m$ on average compared to the phosphor of the $H_3BO_3$ flux alone. In addition, a phosphor synthesized by the two fluxes together had a rounder corner shape, which led to the maximum emission intensity.

• Macromolecular Research
• /
• v.13 no.2
• /
• pp.114-119
• /
• 2005

We synthesized two new series of alternating copolymers, poly[bis(2-(4-phenylenevinylene)-2-cyanoethenyl)-9,9-dihexyl-9H-fluoren-2,7-yl-alt-1,4-phenylene](Polymer-I)and poly[bis(2-(4-phenylenevinylene)-2­cyanoethenyl)-9,9-dihexyl-9H-fluoren-2,7-yl-alt-2,7-(9,9-dihexylfluorene)](Polymer-II), via the Suzuki coupling reaction, for use in light-emitting diodes (LEDs). Defect-free uniformly thin films of these polymers were found to be easily formed on indium-tin oxide (ITO) coated glass substrates. Multi-layer LEDs with ITO/PEDOT/Polymer/ LiF/Al configurations with or without an $Alq_3$ electron transport layer were fabricated with these polymers. The maximum EL emissions of Polymer-I and Polymer-II with an $Alq_3/LiF/Al$ cathode were observed at 516 and 533 nm, respectively. The maximum brightness and external luminance efficiency of the devices fabricated with the EL polymers were found to be $411 cd/m^2$ and 0.16 cd/A, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1441-1444
• /
• 2008

We developed ultra-accelerated quantum chemical molecular dynamics and spectroscopic characterization simulators for development of PDP materials. By combination of these simulators, realistic structure of PDP materials is drawn on the computer. Furthermore, based on the structures, various properties such as cathode luminescence spectrum and secondary electron emission, is successfully evaluated. The strategy of "Experiment integrated Computational Chemistry" using developed simulators will presented that has the potential in being powerful tool for designing the PDP materials.