• 제목/요약/키워드: Catalytic wet peroxide oxidation

검색결과 4건 처리시간 0.017초

Treatment of Oily Wastewater with WPO and CWO

  • Han, Mei;Chen, Yihui;He, Fang;Yu, Li
    • 대한화학회지
    • /
    • 제58권1호
    • /
    • pp.68-71
    • /
    • 2014
  • Petroleum refining unavoidably generates large volumes of oily wastewater. The environmentally acceptable disposal of oily wastewater is a current challenge to the petroleum industry. Nowadays, more attentions have been focused on the treatment techniques of oily wastewater. Oily wastewater contained highly concentrated and toxic organic compounds. Wet peroxide oxidation (WPO) and catalytic wet oxidation (CWO) were applied to eliminate pollutants to examine the feasibility of the WPO/CWO of oily wastewater. The results indicated that more than 80% chemical oxygen demand (COD) removal from oily wastewater was achieved with CWO. Homogenous catalyst, $NaHCO_3$ and $Na_2CO_3$ and NaOH showed effective removal for pollutants in oily wastewater. Greater than 90% COD removal was achieved with WPO. It was concluded that WPO was a far more effective process for oily wastewater.

Cu wire 촉매를 이용한 촉매습식과산화공정에 의한 1,4-다이옥산의 분해 (1,4-Dioxane Decomposition by Catalytic Wet Peroxide Oxidation using Cu Wire Catalysts)

  • 이동근;김둘선
    • 청정기술
    • /
    • 제22권4호
    • /
    • pp.281-285
    • /
    • 2016
  • 난분해성 1,4-다이옥산을 분해시키기 위하여 촉매습식과산화반응에 활성적인 Cu wire촉매를 사용하였다. Cu wire 촉매를 사용함으로써 1,4-다이옥산의 완전한 분해가 가능하였으나, 분해된 1,4-다이옥산은 완전 무기화($CO_2$$H_2O$로 전환)되지 못하고 중간생성물인 ethylene glycol diformate, oxalic acid, formic acid, formaldehyde, acetaldehyde 등으로 전환되었다. 1,4-다이옥산이 분해되어 없어짐에 따라 formaldehyde와 oxalic acid가 점진적으로 나타나기 시작하여 증가하다가 최고농도를 보인 후 다시 감소하였다. 이들 두 중간체의 최고농도 도달시점에 acetaldehyde의 농도가 급격히 증가하여 최고농도를 보인 후 다시 감소하였다. 이들 세가지 중간물질의 감소와 함께 ethylene glycol diformate, formic acid가 생성되기 시작하여 그 농도가 점진적으로 증가하였다. 이들은 연속적인 과정을 통해 생성되었다. Cu wire 촉매는 반응이 진행되는 동안 활성이 떨어지지 않고 매우 안정적이었다.

촉매습식과산화(CWPO)를 이용한 설파메톡사졸의 분해 (Decomposition of Sulfamethoxazole by Catalytic Wet Peroxide Oxidation)

  • 김둘선;이동근;김진솔
    • 청정기술
    • /
    • 제24권4호
    • /
    • pp.293-300
    • /
    • 2018
  • 설파메톡사졸(sulfamethoxazole, SMX)은 박테리아 치료를 위해 사람과 동물에게 널리 사용되어 온 설파아미드계열의 합성 항생제이다. 이들 대부분은 난분해성 물질로서 분해되지 않고 환경생태계에 노출되어 심각한 환경문제를 일으키게 된다. 본 연구에서는 난분해성 SMX를 분해하기 위하여 $Cu/Al_2O_3$ 촉매를 이용한 촉매습식과산화(catalytic wet peroxide oxidation, CWPO) 공정을 수행하였고, SMX를 완전히 분해하기 위한 최적의 온도, 촉매 주입량, 과산화수소($H_2O_2$)의 농도 등을 조사하였다. 1기압, $40^{\circ}C$에서 $H_2O_2$ 0.79 mM과 6 g의 10 wt% $Cu/Al_2O_3$ 촉매를 사용하여 20분 이내에 SMX가 완전히 분해되는 것으로 관찰되었다. 그러나 SMX는 완전히 무기화 되지 못하고, 중간생성물인 hydroylated-SMX, sulfanilic acid, 4-aminobenzenesulfinic acid, nitrobenzene을 거쳐 유기산으로 분해된 후 최종적으로 무기화 되었다. 이들 중간생성물의 거동을 파악하여 SMX의 분해 반응경로를 예측하였고 불균일 촉매의 내구성을 알아보기 위하여 10 wt% $Cu/Al_2O_3$ 촉매를 연속적으로 재사용 하여 SMX 분해율을 조사하였다. SMX의 분해율은 촉매를 5회 이상 재 사용하였을 때 다소 낮아졌지만 촉매의 활성도는 전반적으로 매우 안정적이었다.

Pillared clays from natural resources as catalysts for catalytic wet peroxide oxidation: Characterization and kinetic insights

  • Kalmakhanova, Marzhan Seitovna;Diaz de Tuesta, Jose Luis;Kabykenovna, Bakytgul;Gomes, Helder Teixeira
    • Environmental Engineering Research
    • /
    • 제25권2호
    • /
    • pp.186-196
    • /
    • 2020
  • Pillared clays with Zr and Fe/Cu/Zr polycations have been prepared from natural clays found in large deposits of Kazakhstan and assessed as catalysts for the catalytic wet peroxide oxidation (CWPO), using 4-nitrophenol (4-NP) as model compound. The performance of the catalysts was followed by measuring the concentration of 4-NP, H2O2 and the total organic carbon (TOC), considering C4-NP = 5 g L-1, $C_{H_2O_2}$ = 17.8 g L-1, Ccat = 2.5 g L-1, initial pH = 3.0 and T = 50℃. At those selected conditions, the pillared clays showed higher activity than natural clays in the CWPO of 4-NP. The conversion of the model pollutant was complete when Fe/Cu/Zr-PILCs were used, with the TOC removal reaching 78.4% after 24 h with the best Fe/Cu/Zr-PILC. The H2O2, 4-NP and TOC time-evolution was well described by a kinetic model based on TOC lumps in three blocks, considering the initial TOC (corresponding to 4-NP), the production of oxidizable intermediates and the formation of refractory products.