• Asian Journal of Atmospheric Environment
• /
• 제2권2호
• /
• pp.75-80
• /
• 2008

A new-type apparatus decomposing volatile organic compounds (VOCs) using a combination system of an electrical exothermic SiC honeycomb and a catalytic filter was developed. This linear combination system is very useful to the catalytic decomposition of VOCs, because the gas involving VOCs is well heated in the SiC honeycomb and then flows into the catalytic filter. In the proposed apparatus, the outlet gas temperatures of SiC honeycomb maintained at ca. $300^{\circ}C$ after 5 min from the starting of applying electric current, and sufficient for the catalytic degradation of VOC components, i.e. toluene, isopropanol, methyl ethyl ketone and ethyl acetate. The average decomposition rate of total VOCs exhausted from a printing factory was 85% using pt catalyst at SV=19,000 in this system.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.58-61
• /
• 2009

추진제로써 아산화질소를 활용하기 위해 아산화질소의 촉매 분해 특성에 대한 연구를 수행하였다. 아산화질소를 분해하기 위해 Ru와 Pt 촉매를 $Al_2O_3$ 지지체에 함침법을 이용하여 담지하였고, 관형 반응기를 사용하여 GHSV와 반응온도에 따른 아산화질소의 전환율을 측정하였다. GHSV는 낮을수록, 반응온도는 높을수록 전환율이 높았고, Ru/$Al_2O_3$ 촉매가 Pt/$Al_2O_3$ 촉매보다 우수한 성능을 보였다.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.932-938
• /
• 2010

This paper proposed the effective treatment method for organic substances using the barrier discharge plasma process and catalytic chemical reaction followed from ozone decomposition. The decomposition by the plasma process of organic substances such as trichloroethylene, methyl alcohol, acetone, and dichloromethane carried out, and ozone is generated effectively at the same time. By passing through catalysts, ozone easily decomposed and further decomposed organic substances. And, 2-dimensional distribution of ozone using the optical measurement method is performed to identify the catalytic surface chemical reaction. In addition, CO is easily oxidized into $CO_2$ by this chemical reaction, which might be induced oxygen atom radicals formed at the surface of catalyst from ozone decomposition.

• 공업화학
• /
• 제26권2호
• /
• pp.154-158
• /
• 2015

본 연구에서는 $NF_3$의 분해를 위한 ${\gamma}-Al_2O_3$의 촉매활성을 조사하였다. $NF_3$ 분해반응은 고정층 촉매반응기에서 $330{\sim}730^{\circ}C$ 범위의 반응온도와 $3,000{\sim}15,000mL/g-cat{\cdot}h$의 공간속도 조건에서 수행되었고, $NF_3$의 열분해 반응이 촉매분해반응와 비교를 위하여 함께 수행되었다. $400^{\circ}C$의 촉매분해 반응에서 $NF_3$의 전화율은 열분해 반응보다 4배 정도 높았으며, ${\gamma}-Al_2O_3$상에서 $NF_3$의 반응거동은 스팀의 존재에 따라 두 가지 반응경로를 나타내는 것으로 확인되었다. 스팀이 존재하지 않은 조건에서는 기체-고체 반응에 의해서 $NF_3$에 함유된 불소성분은 $AlF_3$로 전이되고, 스팀이 존재하는 조건에서는 가수분해에 의한 촉매적 분해반응이 일어난다. 또한 $NF_3$는 $500^{\circ}C$ 이상에서 NOx와 HF로 완전히 분해되는 것으로 FT-IR분석에서 확인되었다.

• 한국산업보건학회지
• /
• 제31권1호
• /
• pp.105-110
• /
• 2021

Objectives: The purpose of this study was to develop a new sterilization plasma device that would be proficient at sterilizing and removing pathogenic bacteria and viruses, and applicable to air purification systems. Methods: In order to understand the performance characteristics, the discharge characteristics of a packed bed DBD reactor and the ozone reduction characteristics of an ozone filter installed at the outlet of the reactor were investigated. Results: The novel packed-bed DBD reactor was proposed, and it was confirmed that the plasma discharge was uniformly and stably discharged throughout the entire layer, and sufficient ozone was generated for sterilization. The ozone filter was tested for three methods: adsorption, adsorption-decomposition, and catalytic decomposition. When the filter thickness was 30 mm, the ozone concentrations were 0.03 ppm, 0.01 ppm, and 0.21 ppm, respectively. The adsorption and adsorption-decomposition methods satisfied the EPA standard of less than 0.05ppm, but the catalytic decomposition method did not. Conclusions: It was confirmed that the adsorption-decomposition method has relatively excellent ozone filter performance and can provide the best ozone filter.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.163.2-163.2
• /
• 2014

We report catalytic decomposition of few-layer graphene on an $Au/SiO_x/Si$ surface wherein oxygen is supplied by dissociation of the native $SiO_x$ layer at a relatively low temperature of $400^{\circ}C$. The detailed chemical evolution of the graphene covered $SiO_x/Si$ surface with and without gold during the catalytic process is investigated using a spatially resolved photoelectron emission method. The oxygen atoms from the native $SiO_x$ layer activate the gold-mediated catalytic decomposition of the entire graphene layer, resulting in the formation of direct contact between the Au and the Si substrate. The notably low contact resistivity found in this system suggests that the catalytic depletion of a $SiO_x$ layer could realize a new way to micromanufacture high-quality electrical contact.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.120-127
• /
• 2017

로켓 등급의 고농도 과산화수소는 촉매 분해를 통해 높은 온도의 산소와 수증기를 발생하며, 이와 같은 성질을 이용하여 우주 추진 기술로 사용된 바 있다. 본 연구에서는 과산화수소의 촉매 분해를 이용한 수중 추진 시스템 관련 문헌 조사 및 개념 설계를 진행했다. 과산화수소 분해 가스를 분사하는 분사기 설계의 경우 로켓 노즐 설계 방식과 유사하게 진행했으며, 두 종류의 형태로 엔진 설계를 진행했다. 환형의 형태의 가스 분사기를 갖는 엔진을 제작하여 수중 환경에서 작동 시험을 수행했으며, 엔진 노즐 출구의 면적에 따른 성능 변화를 관찰했다. 향후 중앙에서 가스를 분사하는 방식의 엔진을 제작하여 성능 평가를 수행할 예정이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.35-35
• /
• 2010

Understanding the mechanistic details of heterogeneous catalytic reactions will provide a way to tune the selectivity between various competing reaction channels. In this regard, catalytic decomposition of alcohols over the rutile $TiO_2$(110) surface as a model oxide catalyst has been studied to understand the reaction mechanism employing the temperature-programmed desorption (TPD) technique. The $TiO_2$(110) model catalyst is found to be active toward alcohol dehydration. We find that the active sites are bridge-bonded oxygen vacancies where RO-H heterolytically dissociates and binds to the vacancy to produce alkoxy (RO-) and hydroxyl (HO-). Two protons adsorbed onto the bridge-bonded oxygen atoms (-OH) readily react with each other to form a water molecule at ~500 K and desorb from the surface. The alkoxy (RO-) undergoes decomposition at higher temperatures into the corresponding alkene. Here, the overall desorption kinetics is limited by a first-order decomposition of intermediate alkoxy (RO-) species bound to the vacancy. We show that detailed analysis on the yield and the desorption temperatures as a function of the alkyl substituents provides valuable insights into the reaction mechanism. After the catalytic role of the oxygen vacancies has been established, we employed x-ray photoelectron spectroscopy to further study the surface electronic structure related to the catalytically active defective sites. The defect-related state in valence band has been related to the chemically reduced $Ti^{3+}$ defects near the surface region and are found to be closely related to the catalytic activity of the $TiO_2$(110) surface.

• 한국대기환경학회지
• /
• 제13권4호
• /
• pp.319-325
• /
• 1997

The catalytic decomposition of CFC-113(1,1,2-trichloro-1,2,2-trifluoroethane) was studied over an activated carbon catalyst in a fixed-bed reactor at the temperature from 300 to 600$^\circ$C, the space velocity (SV) of 1800 $\sim 14400h^{-1}$ and the mole ratio(decomposition agent/CFC-113) of 0.25 $\sim$ 5. In the absence of a decomposition agent, the decomposition efficiency of CFC-113 was low but when a decomposition agent was added to the gas stream, it was dramatically increased with the increase of temperature. In particular, in the presence of n-hexane as the decomposition agent it showed a high decomposition efficiency compared with benzene at 400$^\circ$C. It was found that the decomposition activity of CFC-113 was very sensitive to reaction temperature. Thus it is expected that to raise the reaction temperature is more effective than to increase the residence time and the amount of decomposition agent. Over the activated carbon catalyst more than 99% decomposition was achieved at the reaction temperature of 600$^\circ$C, SV of 7200$h^{-1}$, the mole ration $(C_6H_{14}/CFC-113)$ of 1 in this study.

• 한국수소및신에너지학회논문집
• /
• 제22권1호
• /
• pp.51-59
• /
• 2011

Sulfur-Iodine (SI) cycle, which thermochemically splits water to hydrogen and oxygen through three stages of Bunsen reaction, HI decomposition, and $H_2SO_4$ decomposition, seems a promising process to produce hydrogen massively. Among them, the decomposition of $H_2SO_4$ ($H_2SO_4=H_2O+SO_2+1/2O_2$) requires high temperature heat over $800^{\circ}C$ such as the heat from concentrated solar energy or a very high temperature gas-cooled nuclear reactor. Because of harsh reaction conditions of high temperature and pressure with extremely corrosive reactants and products, there have been scarce and limited number of data reported on the pressurized $H_2SO_4$ decomposition. This work focuses whether the $H_2SO_4$ decomposition can occur at high pressure in a noble-metal reactor, which possibly resists corrosive acidic chemicals and possesses catalytic activity for the reaction. Decomposition reactions were conducted in a Pt-lined tubular reactor without any other catalytic species at conditions of $800^{\circ}C$ to $900^{\circ}C$ and 0 bar (ambient pressure) to 10 bar with 95 wt% $H_2SO_4$. The Pt-lined reactor was found to endure the corrosive pressurized condition, and its inner surface successfully carried out a catalytic role in decomposing $H_2SO_4$ to $SO_2$ and $O_2$. This preliminary result has proposed the availability of noble metal-lined reactors for the high temperature, high pressure sulfuric acid decomposition.