• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2004년도 추계학술대회 논문집
• /
• pp.433-434
• /
• 2004

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 1998년도 봄 학술발표회 프로그램
• /
• pp.157-159
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• 제22권9호
• /
• pp.943-944
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제35권7호
• /
• pp.2019-2024
• /
• 2014

NiCu alloys have been suggested as potential candidates for catalysts in glucose oxidation. In this study, NiCu alloys with different compositions were prepared on a glassy carbon substrate by changing the electrodeposition potential to examine the effect of Ni/Cu ratios in alloys on catalytic activity toward glucose oxidation. Cyclic voltammetry and chronoamperometry showed that NiCu alloys had higher catalytic activity than pure Ni and Cu catalysts. Especially, Ni59Cu41 had superior catalytic activity, which was about twice that of Ni at a given oxidation potential. X-ray analyses showed that the oxidation state of Ni in NiCu alloys was increased with the content of Cu by lattice expansion. Ni components in alloys with higher oxidation state were more effective in the oxidation of glucose.

• Bulletin of the Korean Chemical Society
• /
• 제31권2호
• /
• pp.415-418
• /
• 2010

Highly ordered mesoporous silver material was successfully synthesized from a mesoporous silica template (KIT-6) with 3-D channel structure using the nano-replication method. The effects of $H_2$ or $O_2$ pretreatments on the catalytic performance of the mesoporous silver were investigated using a temperature programmed CO oxidation technique in a fixed bed reactor. The mesoporous silver material that was pretreated with $H_2$ exhibited an excellent catalytic activity compared to the as-prepared and $O_2$-pretreated catalysts. Moreover, this present mesoporous silver material showed good catalytic stability. For the CO oxidation, the apparent activation energy of the $H_2$-pretreated mesoporous silver catalyst was $61{\pm}0.5\;kJ\;mol^{-1}$, which was also much lower than the as-prepared ($132{\pm}1.5\;kJ\;mol^{-1}$) and $O_2$-pretreated ($124{\pm}1.4\;kJ\;mol^{-1}$) catalysts.

• 한국수소및신에너지학회논문집
• /
• 제17권3호
• /
• pp.293-300
• /
• 2006

KIER has been developing a Ru-based preferential oxidation catalysts and a novel fuel processing system to provide hydrogen rich gas to residential PEMFCs system. The catalytic activity of Ru-based catalysts was investigated at different Ru loading amount and different support structure. The obtained result indicated that 2 wt% loaded Ru-based catalyst supported on ${\alpha}-Al_2O_3$ showed high activity in low temperature range and suppressed the methanation reaction. The developed prototype fuel processor showed thermal efficiency of 78% as a HHV basis with methane conversion of 92%. CO concentration below 10 ppm in the produced gas is achieved with separate preferential oxidation unit under the condition of $[O_2]/[CO]=2.0$. The partial load operation have been carried out to test the performance of fuel processor from 40% to 80% load, showing stable methane conversion and CO concentration below 10 ppm. The durability test for the daily start-stop and 8 h operation procedure is under investigation and shows no deterioration of its performance after 50 start-stop cycles. In addition to the system design and development.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.512-522
• /
• 2008

Ammonia is a major compound of odor in livestock house. To enhance the performance of ammonia oxidation (decomposition). the gas-liquid, two phase photocatalytic oxidation system was designed and prepared in this study. Commercial P-25 as $TiO_2$ catalyst was used for ammonia decomposition. V/P-25 catalyst prepared by sol gel method was also used for the removal of by-producted $NO_x$ in $NH_3$ oxidation reaction. When $TiO_2$ was used as a photocatalyst, the conversion to $N_2$ in ammonia decomposition reached above 90% until 200hr (The air flow rate of 4L/min with the ammonia concentration up to 25ppm.). However, considerable amounts of NO and $NO_2$ were formed as a result of $NH_3$ oxidation (as a by-product). Therefore, we added Vanadia impregnated $TiO_2$(P-25) catalyst for the removal of $NO_x$ at the end of reaction trail. The results of a pilot-scale operation were successful to achieve the simultaneous removal of $NH_3\;and\;NO_x$ about 81 and 87%, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.212-212
• /
• 2011

In addition to the catalysts' activity and selectivity, the deactivation of catalysts during use is of practical importance. It is crucial to understand the phenomena of the deactivation to predict the loss of activity during catalyst usage so that the high operational costs associated with catalyst replacement can be reduced. In this study, the activity of Ru catalysts, such as nanoparticles (3~6 nm) and polycrystalline thin film (50 nm), have been investigated under CO oxidation and oxidative/reductive reaction conditions at various temperatures with the ambient pressure X-Ray photoelectron spectroscopy (APXPS). With APXPS, the surface oxides on the catalyst are measured and monitored in-situ. It was found that the Ru film exhibited faster oxidation-and-reduction compared to that of nanoparticles showing mild oxidative-and-reductive characteristics. Additionally, the larger Ru nanoparticles showed a higher degree of oxide formation at all temperatures, suggesting a higher stability of the oxide. These observations are in agreement with the catalytic activity of Ru catalysts. The loss of activity of Ru films is correlated with bulk oxide formation, which is inactive in CO oxidation. The Ru nanoparticle, however, does not exhibit deactivation under similar conditions, suggesting that its surface is covered with a highly active ultrathin surface oxide. Since the active oxide is more stable as nanoparticles than as a film, the nanoparticles showed mild oxidative/reductive behavior, as confirmed by APXPS results. We believe these simultaneous observations of both the surface oxide of Ru catalysts and the reactivity in real time enable us to pinpoint the deactivation phenomena more precisely and help in designing more efficient and stable catalytic systems.

• 청정기술
• /
• 제2권1호
• /
• pp.60-68
• /
• 1996

고정층 반응기에서 망간광석을 이용하여 저농도의 일산화탄소 산화제어반응에 대하여 고찰하였다. 고려된 실험변수는 일산화탄소 농도 (500ppm~10000ppm), 산소 농도(500ppm~99.8%)와 촉매의 온도($50{\sim}750^{\circ}C$)이다. 또한 망간광석의 특성은 Thermogravimetric Analysis(TGA), 일산화탄소에 의한 환원, Temperature Programmed Reduction(TPR)실험을 이용하여 규명하였다. 망간광석의 일산화탄소 산화력은 순수이산화망간에 비해서 단위 면적당 높은 산화력과 $750^{\circ}C$까지 가열된 후에도 산화력이 유지될 수 있는 안정된 촉매작용을 보였다. Temperature Programmed Desorption(TPD), TPR 실험과 TG 등의 분석결과 산소의 농도가 낮거나 무산소하에서 망간광석의 격자내 산소가 쉽게 제공될 수 있음을 알 수 있었다. 일산화탄소의 농도가 500~3500ppm일 때 일산화탄소의 반응차수는 0.701이며 3500~10000ppm구간에서 일산화탄소의 농도에 무관한 0차 반응이었다.

• 공업화학
• /
• 제25권3호
• /
• pp.281-285
• /
• 2014

호기성 벤질 알코올 산화반응용 촉매로 팔라듐이 담지된 이산화티타늄 입자를 제조하였다. 우선 합성한 이산화티타늄입자에 10 wt% 팔라듐을 함침한 후, 다양한 온도에서 소성하여 촉매를 제조하였다. 촉매의 비표면적은 소성온도에 따라 변하였는데, $300^{\circ}C$에서 소성한 촉매의 비표면적이 가장 높게 측정되었다. 제조된 촉매의 반응 결과 $300^{\circ}C$에서 소성한 입자가 가장 우수한 반응성능을 보였다. 또한 팔라듐의 농도를 5 wt%에서 15 wt%까지 조절하여 함침한 후 $300^{\circ}C$에서 소성하여 촉매를 합성하였다. 팔라듐의 농도가 10 wt%인 $Pd/TiO_2$ 입자가 벤질알코올 산화반응에 최적의 촉매로 규명되었다. 이는 상대적으로 높은 촉매의 비표면적 및 팔라듐 분산도에 기인한다.