• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.917-923
• /
• 2005

In this paper, effect of catalytic configuration on the sensing properties of $SnO_2$ nanoparticle gas sensitive thick film was investigated. Two types of catalytic configuration, mono and binary, were made on the $SnO_2$ nanoparticle. In case of mono catalytic system, $3 wt\%$ Pd or Pt catalyst was doped onto the $SnO_2$ nanoparticle, respectively. In case of binary catalytic system, Pd and Pt was doped simultaneously with concentration ratio of 1:2 to 2:1 onto the $SnO_2$ nanoparticle. After doping, gas sensitive thick film was printed on alumina substrate and heat-treated at 450 to $600^{\circ}C$. Gas sensing properties was evaluated using 500 to 10,000 ppm $CH_4$ gas. As a result, gas sensitive thick film with binary catalytic system showed unstable phenomena that the gas sensitivity was changed according to aging time. In contrary, the mono catalytic system showed relatively stable phenomena despite of aging time. Especially, gas sensitive thick film doped with $3 wt\%$ Pt catalyst and heat-treated at $500^{\circ}C$ showed good sensing properties such as 0.57 of $R_{3500}/R_{1000}$ and very small variation within $3.5\%$ after aging for 5 hours, and response time was very short less than 20 seconds.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.66-74
• /
• 2011

The SCR catalyst in coal-fired power plant is eroded by the collision of fly ash on the catalyst surface. However the erosion of SCR catalyst by the collision of fly ash has not been fully studied, especially in terms of fluid dynamics. Hence, in the present study, we focus on the gas and solid flows inside the SCR catalyst duct and their consequent effect on the erosion characteristics. For this purpose, computational fluid dynamics is applied to investigate the two-phase flows and to evaluate the erosion rate for different flow and particle injection conditions. Also, the erosion rate and pressure drop of commonly used square shape are compared with equilateral triangle and hexagon shapes. The pressure drop of SCR catalyst is increased when SCR catalyst surface area per unit volume increases. The erosion rate of SCR catalyst is enhanced when the particle velocity, mass flow rate of particle, particle diameter and cell density of SCR catalyst are increased. From the results, the pressure drop and erosion rate at the catalyst surface can be minimized by reducing cell density of SCR catalyst to decrease particle velocity and number of particle impacts.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.955-965
• /
• 2014

Transport phenomena of reactant and product are directly linked to intrinsic inhomogeneous random configurations of catalyst layer (CL) that consist of ionomer, carbon-supported catalyst (Pt/C), and pores. Hence, electrochemically active surface area (ECSA) of Pt/C is dominated by geometrical morphology of mass transport path. Undoubtedly these ECSAs are key factor of total fuel cell efficiency. In this study, non-deterministic micro-scale CLs were randomly generated by Monte Carlo method and implemented with the percolation process. To ensure valid inference about Pt/C catalyst utilization, 600 samples were chosen as the number of necessary samples with 95% confidence level. Statistic results of 600 samples generated under particular condition (20vol% Pt/C, 30vol% ionomer, 50vol% pore, and 20nm particle diameter) reveal only 18.2%~81.0% of Pt/C can construct ECSAs with mean value of 53.8%. This study indicates that the catalyst utilization in fuel cell CLs cannot be identical notwithstanding the same design condition.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.266-271
• /
• 2005

과산화수소를 단일추진제로 사용하는 마이크로 추력기를 위한 실험적 연구를 수행하였다. 연구에서 은촉매 활성화 방법과 촉매 반응 챔버의 성능평가에 관한 실험을 하였다. 활성화를 위해 수소 환원법을 실시하였으며 $500^{\circ}C$의 환원 온도의 경우 가장 좋은 반응성을 가짐을 확인하였다. 촉매 분해 반응 연구를 위해 촉매 반응기가 제작되었다. 촉매 베드를 위해 지지체로 20 mm 길이의 유리 웨이퍼를 준비하여 은촉매를 스퍼터링 하였다. 추진제의 체류시간, 촉매 베드 온도, 촉매 코팅 면적을 변화시키며 추진제 전환율을 측정하였다.

• 고무기술
• /
• 제13권1호
• /
• pp.1-9
• /
• 2012

Click chemistry had enjoyed a wealthy decade after it was introduced by K.B.Sharpless and his co-worker on 2001. Since there is no optimized method for synthesis of click polymer, therefore, this paper introduced three click reaction methods such as catalyst, non-catalyst and azide-end capping for fluorene-based functional click polymers. The obtained polymers have reasonable molecular weight with narrow PDI. The polymers are thermally stable and almost emitted blue light emission. The synthesized fluorene-based functional click polymers were characterized to compare the effect of click reaction methods on polymer electro-optical properties as well as device performance on quasi-solid-state dye sensitized solar cells (DSSCs) applications. The DSSCs with configuration of $SnO_2:F/TiO_2/N719$ dye/quasi-solid-state electrolyte/Pt devices were fabricated using these click polymers as a solid-state electrolyte components. Among the devices, the catalyzed click polymer composed device exhibited a high power conversion efficiency of 4.62% under AM 1.5G illumination ($100mW/cm^2$).These click polymers are promising materials in device application and $Cu^I$-catalyst 1, 3-dipolar cycloaddition click reaction is an efficient synthetic methodology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1224-1225
• /
• 2008

The results of the experiment that was conducted on the electron emission property and the long-term stability of the emission current in various carbon nanotubes (CNTs)-based field emitters with a CNT/catalyst/buffer/W-tip configuration are presented herein. CNT-based field emitters were fabricated by varying the (TiN, Al/Ni/TiN) buffer layer and the (Ni, Co) catalyst material. This study aimed to elucidate how the buffer layers and catalyst materials affect the structural properties of CNTs and the long-term stability of CNT emitters. Raman spectroscopy, field emission SEM, and high-resolution TEM were used to analyze the crystalline structure, surface morphologies, and nanostructures of all the grown CNTs. X-ray photoelectron spectroscopy (XPS) was used to monitor the chemical bonds of all the buffer layers and catalysts. Electron emission measurement and a long-term (up to 40h) stability test were carried out using a compactly designed field emission measurement system.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.325-331
• /
• 2003

This paper described the characteristics of the exhaust pressure and proposed the assistant device for detection of misfired cylinder. Misfire, one of abnormal combustion, affects a bad influence of the 3-way catalyst and emits unburned hydrocarbon. Therefore, to prevent these unusual phenomena and eliminate the factor of the environmental pollution, early detection and correction of the misfired cylinder play a very important role. The configuration of assistant device was changed by length and diameter of pipe and analyzed with the install position on the exhaust system. Experimental results showed that the configuration of assistant device is not affected more than length and diameter of pipe and the assistant device is be effective in the detection of misfired cylinder on the gasoline engine.

• 한국자기공명학회논문지
• /
• 제27권2호
• /
• pp.10-15
• /
• 2023

The Strain-Promoted Azide-Alkyne Cycloaddition (SPAAC) is a powerful method for synthesizing triazoles, even under physiological conditions, without a copper catalyst. This technique provides an efficient means for everyone to synthesize complex triazole derivatives rapidly. In order to investigate the configuration of triazole derivatives using bicyclo[6.1.0.]-nonyne (BCN) and chiral azide, it is necessary to employ the 2D NMR. Both 1D and 2D NMR (COSY, HSQC, ¹⁵N HMBC) are used to analyze the complex triazole product containing cyclooctyne, a diastereomeric product. The stereometric difference of the proton bonded to the same carbon is determined through the HSQC assignment. The intriguing splitting pattern of carbon resonances also reveals their diastereomeric configuration and will aid in further research based on physiological knowledge.

• 청정기술
• /
• 제28권4호
• /
• pp.316-322
• /
• 2022

선택적 촉매환원 시스템 내 촉매 층 입구의 흐름 패턴은 탈질 설비의 성능에 영향을 미치는 주요한 특성 중 하나이다. 암모니아 주입 그리드와 촉매 층 사이의 곡확산부에는 유동 균일성을 개선하기 위해 안내 깃이 설치된다. 본 연구에서는 대형 석탄 화력 발전소의 선택적 촉매환원 시스템을 적용 대상으로 하여 안내 깃의 기하학적 구성이 탈질 설비의 공기역학적 특성에 미치는 영향을 조사하기 위해 수치 해석을 수행하였다. 해석할 유동장은 암모니아 주입구의 출구부터 촉매 층 출구까지의 유동이 흐르는 전 영역을 포함한다. 3차원 정상상태, 점성 유동장을 해석하기 위해 상용 소프트웨어인 ANSYS-Fluent을 사용하여 유동 특성에 맞는 적절한 난류 모델을 적용하였다. 유동장 내부의 속도 및 압력 강하의 루트 평균 제곱을 주요 성능 매개변수로 선택했다. 현재 운용 중인 설비와 비교하여 흐름 품질을 개선하기 위해 4가지 유형의 안내 깃이 제안되었다. 해석 결과, 4번째 형상이 유동 균일성과 압력 등 관점에서 가장 좋은 공력 성능을 나타내었다.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.176-185
• /
• 2018

지구 온난화가 가속화됨에 따라 온실가스 감축이 보다 중요해졌다. 이산화탄소 건식 개질은 온실가스인 $CO_2$와 $CH_4$를 활용하여 부가가치가 높은 물질인 CO와 $H_2$를 얻을 수 있는 유망한 온실가스 감축 기술이다. 그러나 이 반응이 일어나는 반응기의 운전 중에 심각한 코킹 문제가 발생할 수 있다. 이산화탄소 개질반응은 매우 강한 흡열반응이기 때문에 반응기 입구 근처에서 반응 온도가 많이 떨어지면서 코크 생성을 야기시킨다. 이러한 문제를 해결하기 위해서는 코크 생성이 잘 일어나지 않는 온도영역에서 반응이 일어나도록 하는 것이 중요하다. 본 연구에서는 새로운 촉매 배열 방법을 이용하여 반응기 전 구간이 코크 생성이 잘 일어나지 않는 온도 영역 내에서 유지되도록 하는 설계 방법을 제안하였다. 이 설계 방법은 연료 유량, 촉매 밀도, 구간 별 출구 온도를 최적화 변수로 하여 주어진 전환율에 대하여 반응기 길이를 최소화 할 수 있는 최적화 문제를 풀도록 하여 반응기를 최적화한다.