• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.813-818
• /
• 2008

고체 산화물 연료전지(SOFC)에서 Ni/YSZ 음극 촉매를 이용한 내부 개질 반응 시 코크 형성에 의한 촉매 비활성화 문제점을 개선하기 위해 음극에 여러가지 조촉매(Ce, Co, Cu, Cr, Mn, Pd, K, $K_2Ti_2O_5$)들을 첨가하여 그 영향을 조사하였다. $H_2O/CH_4=1.5$ 몰비, 800의 반응 조건하에서 수증기 개질 반응을 행한 결과 전이금속산화물들은 코크형성을 억제하는 효과가 없었고 메탄전환율도 오히려 감소하였다. Potassium을 담지한 Ni/YSZ의 경우는 초기에는 뚜렷한 코크형성 억제 효과가 있었으나 반응 후 42시간이 지나면 휘발에 의한 Potassium함량 감소로 급격한 촉매활성의 저하가 일어났다. 격자 구조에 Potassium이 내장된 $K_2Ti_2O_5$를 5% 혼합한 Ni/YSZ의 경우에는 장기간 운전에도 반응 활성이 줄어들지 않아서 음극 촉매의 코크 억제용 첨가제로 적용될 수 있음을 알았다. 반응시간에 따른 촉매의 비활성화는 촉매 표면에서의 graphidic carbon의 생성 때문으로 밝혀졌다.

• 한국수소및신에너지학회논문집
• /
• 제27권5호
• /
• pp.517-525
• /
• 2016

The present work investigates the effect of $K_2CO_3$ catalyst on steam gasification of Kideco coal and the deactivation of the catalyst due to thermal exposure and interaction with coal ash. The gasification reactivity at $700^{\circ}C$ is highly enhanced by $K_2CO_3$, which is not deactivated by the heat treatment at $T{\leq}800^{\circ}C$. TGA and XRD results prove minor decomposition of $K_2CO_3$ after the calcination at $800^{\circ}C$. $K_2CO_3$ is, however, evaporated at the higher temperature. Assuming the conversion of $K_2CO_3$ into $K_2O$ by the decomposition and into $K_2O{\cdot}2.5SiO_2$ and $KAlO_2$ by the interaction with coal ash, the reactivity of the gasification is evaluated in the presence of $K_2O$, $K_2O{\cdot}2.5SiO_2$ and $KAlO_2$. Among them, $K_2O$ is the most active, but much lower in the activity than $K_2CO_3$. XRD results show that $K_2CO_3$ could react readily with the ash above $700^{\circ}C$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.511-512
• /
• 2008

For the $CO_2$ reforming of $CH_4$, Ni catalyst was supported on La-hexaaluminate or on $\gamma$-$Al_2O_3$. The catalytic activities of Ni/La-hexaaluminate catalysts were measured at $700^{\circ}C$ using gas chromatography (GC) for 72 h, and the reaction was maintained up to 72 hfor the investigation of catalyst deactivation. The surface of each catalyst after 72 h reaction was investigated using SEM and TEM, and the composition of the carbon deposits was investigated by using EA, TPO and TGA. Ni/La-hexaaluminate shows higher resistance to coke deposition than conventional Ni/$Al_2O_3$ which seems to be due to strong interaction between Ni and the support material. As a result of the reforming reaction, various types of carbon deposits were created on catalyst surface and the amounts of them were much smaller in the case of La-hexaaluminate than on $Al_2O_3$.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.247-250
• /
• 2008

Biomass gasification is a promising technology for producing a fuel gas which is useful for power generation systems. In biomass gasification processes, tar formation often causes some problems such as pipeline plugging. Thus, proper tar treatment is necessary. So far, nickel (Ni)-based catalysts have been intensively studied for the catalytic tar removal. However, the deactivation of Ni-based catalysts takes place because of coke deposition and sintering of Ni metal particles. To overcome these problems, we have been using ruthenium (Ru)-based catalyst for tar removal. It is reported by Okada et al., that a Ru/$Al_2O_3$ catalyst is very effective for preventing the carbon deposition during the steam reforming of hydrocarbons. Also, this catalyst is more active than the Ni-based catalyst at a low steam to carbon ratio (S/C). Benzene was used for the tar model compound because it is the main constituent of biomass tar and also because it represents a stable aromatic structure apparent in tar formed in biomass gasification processes. The steam reforming process transforms hydrocarbons into gaseous mixtures constituted of carbon dioxide ($CO_2$), carbon monoxide (CO), methane ($CH_4$) and hydrogen ($H_2$).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.347-347
• /
• 2010

We designed a new experimental set-up for measuring activity of heterogeneously catalyzed reactions. Using this set-up, we studied reduction of carbon dioxide by carbon dioxide reforming of methane (CRM) using nickel powder as catalyst. The properties of the catalysts were characterized by X-ray diffraction (XRD), Brunauer, Emmett & Teller (BET) surface area and X-ray photoelectron spectroscopy (XPS) techniques. The reactivity experiments were performed in the temperature range of $300\;-\;500^{\circ}C$. At reactivity experiment, result showed consumption of $CO_2$ and $CH_4$ with a 1:1 stoichiometry. At the same time, carbon monoxide and hydrogen were produced, which could be used for synthesizing fuels such as methanol. During the reaction, deposition of carbon on Ni was observed, which caused deactivation of the catalyst.

• 청정기술
• /
• 제22권3호
• /
• pp.141-153
• /
• 2016

화력발전소, 소결공정, 소각장 등과 같은 수많은 배출원들은 배연탈질시스템을 적용하는데 V₂O₅/TiO₂계 모노리스 촉매상에서 NH₃를 환원제로 사용하는 선택적촉매환원 기술이 대표적이다. 현장에서 설치·운영되는 모든 탈질시스템은 예외없이 운전시간에 따른 촉매비활성화를 수반하므로 이에 효과적이고 경제적으로 대처할 수 있는 탈질성능 유지와 촉매관리를 위한 체제와 전략이 요구된다. 본 논고에서는 이들에 관한 구체적인 전략수립과 이에 기반한 탈질시스템 운영방법을 살펴보고, 신촉매 또는 재생촉매의 추가나 대체를 통한 탈질성능 관리와 경제성을 고려한 탈질촉매 재생기술을 다루고자 한다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1643-1646
• /
• 2012

Three Ni-based catalysts with different clay as support were prepared and tested in the hydrogenation of maleic anhydride, among which Ni/clay1 showed best activity and selectivity. Over Ni/clay1 catalyst prepared by impregnation method, 97.14% conversion of maleic anhydride and 99.55% selectivity to succinic anhydride were obtained at $180^{\circ}C$ under a pressure of 1 MPa. Catalytic activity was greatly influenced by the temperature and weighted hourly space velocity. Catalyst deactivation studies showed that this catalyst have a long life time, the yield of MA still higher than 90% even after a reaction time of 60 h. X-ray diffraction (XRD) and $H_2$ temperature programmed reduction (TPR) were use to investigate the properties of the catalyst. XRD and TPR studies showed that Ni was present as $Ni^{2+}$ on the support, which indicated that there was no elemental nickel ($Ni^0$) and $Ni_2O_3$ in the unreduced samples. The formation of Ni was strong impact on catalytic activity.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.267-267
• /
• 2012

$TiO_2$-Ni inverse catalysts were prepared using atomic layer deposition (ALD) process and catalytic $CO_2$ reforming of methane (CRM) reaction over catalysts (either bare Ni or $TiO_2$ coated-Ni particles) were performed using a continuous flow reactor at $800^{\circ}C$. $TiO_2$-Ni inverse catalyst showed higher catalytic reactivity at initial stage of CRM reactions at $800^{\circ}C$ comparing to bare Ni catalysts. Moreover, catalytic activity of $TiO_2$/Ni catalyst was kept high during 13 hrs of the CRM reactions at $800^{\circ}C$, whereas deactivation of bare Ni surface was started within 1hr under same conditions. The results of surface analysis using SEM, XPS, and Raman showed that deposition of graphitic carbon was effectively suppressed in a presence of $TiO_2$ nanoparticles on Ni surface, thereby improving catalytic reactivity and stability of $TiO_2$/Ni catalytic systems. We suggest that utilizing decoration effect of metal catalyst with oxide nanoaprticles is of great potential to develop metal-based catalysts with high stability and reactivity.

• 한국물환경학회지
• /
• 제31권5호
• /
• pp.468-475
• /
• 2015

Various methods to degrade explosives efficiently in natural soil and water that include trinitrotoluene (TNT) have been studied. In this study, TNT in water was degraded by reduction with palladium (Pd) catalyst impregnated onto alumina (henceforth Pd-Al catalyst) and formic acid. The degradation of TNT was faster when the temperature of water was high, and the initial TNT concentration, pH, and ion concentration in water were low. The amounts of Pd-Al catalyst and formic acid were also important for TNT degradation in water. According to the experimental results, the degradation constant of TNT with unit mass of Pd-Al catalyst was $8.37min^{-1}g^{-1}$. The degradation constant of TNT was higher than the results of previous studies which used zero valent iron. 2,6-diamino-4-nitrotoluene and 2-amino-4,6-dinitrotoluene were detected as by-products of TNT degradation showing that TNT was reduced. The by-products of TNT were also completely degraded after reaction when both Pd-Al catalyst and formic acid existed. Even though there are several challenges of Pd-Al catalyst (e.g., deactivation, poisoning, leaching, etc.), the results of this study show that TNT degradation by Pd-Al catalyst and formic acid is a promising technique to remediate explosive contaminated water and soil.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.115.2-115.2
• /
• 2010

Autothermal reforming(ATR) processes of hydrocarbon liquids such as diesel fuels are spotlighted as methods to produce hydrogen for Fuel cell. However, the use of heavy hydrocarbons as feedstocks for hydrogen production causes some problems which increase the catalyst deactivation by the carbon deposition. Coking can be inhibited by increasing the water dissociation on the catalyst surface. This results in catastrophic failure of whole system. Performance degradation of diesel autothermal reforming leads to increase of undesirable hydrocarbons at reformed gases and subsequently decrease the performance. In this study, perovskite-based catalysts were investigated as alternatives to substitute the noble metal catalyst for the ATR of diesel. The investigated perovskite structure was based on LaCrO3. and metals were added at the A-site to enhance oxygen ion mobility, transition metals were doped on the B-site to enhance the reformation. Substituted Lanthanum chromium perovskite were made by aqueous combustion synthesis, which can produce high surface area. And for the homogeneous fuel supply, we made ultrasonic injection system for reforming. We compared durability of evaporation system and ultrasonic system for fuel injection.