• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.105-111
• /
• 2007

In this study, we investigated the conversion performance of de-NOx catalyst for lean-burn natural gas engine. As a de-NOx catalyst, NOx storage reduction catalyst was composed of Pt, Pd and Rh with washcoat including Ba and Ni, Ru-ZSM-5. Ni, Ru-ZSM-5, which was regarded as a NOx direct decomposition catalyst, was made up of ion exchanged ZSM-5 by 5wt.% Ni or Ru. The performance of de-NOx catalyst was evaluated by NOx storage capacity and catalytic reduction in air/fuel, $\lambda=1.6$. The catalytic reaction was also observed when the added fuel was supplied to fuel rich atmosphere by fuel spike period of 5 seconds. The NOx conversion of the catalysts with Ni-ZSM-5 or Ru-ZSM-5 was mainly caused by the effect of NOx adsorption of Ba rather than the catalytic reduction of Ni, Ru-ZSM-5. Ni, Ru-ZSM-5 catalysts can not use for the NSR catalyst because they have quick process in thermal deactivation.

• 한국응용과학기술학회지
• /
• 제19권2호
• /
• pp.123-130
• /
• 2002

[Ga]-MFI and H-ZSM-5 catalysts were synthesized under atmospheric pressure and used in the propylene aromatization. The effect of temperature on the product distribution was also investigated. The catalytic activities of the prepared catalysts were compared with the commercialized H-ZSM-5 which was converted from $NH_{4}$-ZSM-5. In the propylene aromatization, product distribution does not depend on the ratio of Si/$Ga_{2}$ with [Ga]-MFI catalyst, but depend on the ratio of Si/$Al_{2}$ with H-ZSM-5 catalyst [Ga]-MFI catalyst shows better dehydrogenation and alkylation activities than H-ZSM-5 catalyst The addition of Ga to H-ZSM-5 catalyst increases the conversion of propylene, selectivity to aromatics, and alkylation. In the propylene aromatization, the selectivity to aromatics slightly increased with increasing temperature with [Ga]-MFI catalyst, while slightly decreased with increasing temperature with H-ZSM-5 catalyst.

• 공업화학
• /
• 제18권5호
• /
• pp.511-515
• /
• 2007

Tubular 형의 반응기를 이용한 선박용 폐윤활유의 등온실험에서 열분해 온도가 $440^{\circ}C$에서는 $400^{\circ}C$와 $420^{\circ}C$일 때보다 오일의 전환율이 급격하게 증가하였고 분해반응은 30 min 이내에 대부분 완료되었다. 반응온도 증가에 따라서 기체의 수율은 감소하는 경향을 나타냈으며, 고체 수율은 거의 변화가 없는 것을 확인할 수 있다. 석유화학공정으로부터 배출되는 ZSM-5 폐촉매를 사용하여 선박용 폐윤활유의 열분해반응 특성 연구를 수행하였다. Used ZSM-5와 fresh ZSM-5 촉매를 사용했을 경우에촉매가 없는 조건에서보다 기체의 수율이 현저하게 높은 것을 확인할 수 있다. 동일한 온도에서 fresh ZSM-5 촉매와 used ZSM-5 촉매의 액체 및 기체 생성량에는 거의 변화가 없었다. 반응온도 $400{\sim}440^{\circ}C$에서 fresh ZSM-5와 used ZSM-5 촉매를 사용하여 반응실험을 한 경우 촉매를 사용하지 않았을 때보다 $C_5-C_{11}$에 해당하는 탄화수소화합물의 선택성이 2배 정도 증가하였다.

• 대한화학회지
• /
• 제25권2호
• /
• pp.97-102
• /
• 1981

$SiO_2$/$Al_2O_3$ 비가 높은 제올라이트 ZSM-5를 합성하여 메탄올의 탄화수소로의 전환반응을 조사하였다. 메탄올이 전환되어 올레핀, 파라핀, 시클로파라핀 및 방향족화합물이 생성되었으며 특히 방향족 화합물에 대한 큰 선택성을 보여 주었고 1,3,5-trimethylbenzene의 크기정도에 제한된 형상선택성 촉매작용임을 알 수 있었다. 수소형태(HZSM-5)가 활성이 커, 메탄올이 탈수되어 일어나는 잇단 복잡한 반응들이 산촉매반응이 주임을 보여 주었다. ZSM-5와 구조가 유사한 mordenite와 3차원구조를 지닌 faujasite 촉매에서의 메탄올의 반응으로 구조적 영향과 TPD실험에 의한 산점분포를 비교한 결과 메탄올로부터 방향족화합물에 이르기까지의 탄화수소 합성에서의 ZSM-5 제올라이트의 촉매작용은 높은 실리카함량에 기인한 강한 산성과 교차하는 세공관 구조에 의한 분자체 효과에 의한 것으로 볼 수 있다.

• 한국분말재료학회지
• /
• 제5권4호
• /
• pp.273-278
• /
• 1998

$De-NO_x$ transition metals(Cu, Co)/ZSM-5 catalyst was made by mechanical alloying method, and their microstructures and repeated usage-properties were investigated by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The conversions ability of NO in the catalyst was measured. A part of ZSM-5 in CO/ZSM-5 composite powders was amorphous and the amorphous phase became less stable with increasing Co content. Conversion ability of NO in 10Cu/ZSM-5 powders decreased from 89% to 12% and that in 10Co/ZSM-5 decreased from 22% to 17% by 7 times conversion tests.

• 한국분말재료학회지
• /
• 제3권3호
• /
• pp.153-158
• /
• 1996

The exhaust gas from vehicle engines and industrial boilers contains considerable amount of harmful nitrogen monoxide(NO) which causes air pollusion and acid rain. To remove NO catalytic reduction processes using Cu ion exchanged ZSM-5 zeolite have been widely studied. In this study, an attempt was made to fabricate Cu/zeolite catalyst by using high energy ball mill. The catalytic performance of ball milled Cu/ZSM-5 zeolites is analyzed and optimum copper contents was determined. The processing variables were reaction temperature and copper contents. Complete removal of NO gas was obtained at the temperature of 553 K on 10wt.% CU/ZSM-5 mechanically alloyed composite powders. Mechanically alloyed CU/ZSM-5 catalyst showed homogeneous distribution of Cu in ZSM-5.

• 대한화학회지
• /
• 제25권3호
• /
• pp.172-176
• /
• 1981

형상 선택성 ZSM-5 제올라이트 촉매상에서 메탄올로부터 $C_2-C_{10}4의 탄화수소 형성을 조사하였다. 메탄올로 부터 dimethylether를 거쳐 생성되는 $C_2-C_5$의 올레핀들이 ZSM-5의 강한 산점에서 고리화 반응등에 의하여 방향족 화합물이 많이 포함된 탄화수소화합물로 전환된다고 생각된다. 메탄올의 전환반응에 대한 ZSM-5 촉매의 높은 활성과 활성저하에 대한 안정성은 특유의 교차되는 세공관구조와 소수성에 기인하는 것으로 보인다.

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.54-61
• /
• 2005

Liquid-phase catalytic degradation of waste high-density polyethylene (HDPE) over ZSM-5 (powder type (PW)) and ZSM-5+binder (granule type (GR)) has been investigated with a stirred semi-batch operation at 400°C. Two ZSM-5 catalysts with a different crystal size were synthesized and also each ZSM-5 (25%) Catalyst was mixed with a same binder (kaolin: silica sol: alumina = 55%:10%:10%). The performance of prepared catalysts that has different physicochemical properties was discussed with the cumulative amount distribution, molecular weight distribution and also paraffin, olefin, naphthene and aromatic (PONA) distribution in liquid product. These liquid product quality and distributions were changed depending on the physicochemical properties of the catalyst. Moreover, the characteristic of ZSM-5 in the catalyst was strongly influenced on the activity and PONA distribution in liquid product.

• Bulletin of the Korean Chemical Society
• /
• 제35권2호
• /
• pp.525-530
• /
• 2014

Titanium dioxide nanotube supported ZSM-5 zeolite composite catalyst was fabricated by decorating ZSM-5 zeolite on the hydrothermally synthesized titanium dioxide via hydrothermal process and subsequent annealing. The catalyst was characterized by X-ray powder diffraction (XRD), Transmission electron microscopy (TEM) and Nitrogen adsorption-desorption (BET). The surface acidity of the catalyst was measured by means of Fourier transform infrared (FT-IR) spectrum of pyridine adsorption. And the catalytic activity for ethanol dehydration to ethylene was evaluated in a continuous flow fixed-bed reactor. Attributed to the increase of the effective surface acid sites caused by titanium dioxide nanotube as electron acceptor, titanium dioxide nanotube supported ZSM-5 zeolite composite catalyst exhibits strongly enhanced activity for ethanol dehydration to ethylene.

• 대한화학회지
• /
• 제27권2호
• /
• pp.127-132
• /
• 1983

톨루엔의 동종간 주고 받기 반응에 대한 ZSM-5 촉매의 활성은 양이온의 종류, 이온교환을 그리고 반응온도에 좌우된다. 활성은 알카리금속, 알카리토금속, 수소, 희토류 금속 이온이 교환되는 순서로 증가하며 이온 교환도가 증가함에 따라 감소한다. 이온 교환된 ZSM-5 촉매중에서 Cs-ZSM-5만이 p-크실렌에 대해 우세한 선택성을 나타내는데 p-크실렌에 대한 선택성은 세슘이온 교환율이 증가할 수록 반응온도가 감소 할수록 증가한다. 이러한 현상은 ZSM-5의 세공 교차점에 있는 세슘이온이 부분적으로 세공을 막아주는 형상 선택성으로 해석된다.