• 천문학회지
• /
• 제43권1호
• /
• pp.9-23
• /
• 2010

In this paper we examined the association of Infrared Dark Cloud (IRDC) cores with YSOs and the geometric properties of the IRDC cores. For this study a total of 13,650 IRDC cores were collected mainly from the catalogs of the IRDC cores published from other studies and partially from our catalog of IRDC cores containing new 789 IRDC core candidates. The YSO candidates were searched for using the GLIMPSE, MSX, and IRAS point sources by the shape of their SED or using activity of water or methanol maser. The association of the IRDC cores with these YSOs was checked by their line-of-sight coincidence within the dimension of the IRDC core. This work found that a total of 4,110 IRDC cores have YSO candidates while 9,540 IRDC cores have no indication of the existence of YSOs. Considering the 12,200 IRDC cores within the GLIMPSE survey region for which the YSO candidates were determined with better sensitivity, we found that 4,098 IRDC cores (34%) have at least one YSO candidate and 1,072 cores among them seem to have embedded YSOs, while the rest 8,102 (66%) have no YSO candidate. Therefore, the ratio of [N(IRDC core with protostars)]/[N(IRDC core without YSO)] for 12,200 IRDC cores is about 0.13. Taking into account this ratio and typical lifetime of high-mass embedded YSOs, we suggest that the IRDC cores would spend about $10^4\sim10^5$ years to form high-mass stars. However, we should note that the GLIMPSE point sources have a minimum detectable luminosity of about $1.2 L_{\odot}$ at a typical IRDC core's distance of ~4 kpc. Therefore, the ratio given here should be a 100ver limit and the estimated lifetime of starless IRDC cores can be an upper limit. The physical parameters of the IRDC cores somewhat vary depending on how many YSO candidates the IRDC cores contain. The IRDC cores with more YSOs tend to be larger, more elongated, and have better darkness contrast than the IRDC cores with fewer or no YSOs.

• 천문학논총
• /
• 제27권4호
• /
• pp.129-134
• /
• 2012

The North Ecliptic Pole (NEP) Wide survey covered about 5.4 $deg^2$, a nearly circular area centered on the NEP, using nine passbands of InfraRed Camera (IRC). We present the photometric properties of the data sets, and the nature of the sources detected in this field. The number of detected sources varied according to the filter band: with about 109,000 sources in the NIR, about 20,000 sources in the MIR-S, and about 16,000 sources seen in the MIR-L channel. The $5{\sigma}$ detection limits are about 21 mag in the NIR and 19.5 - 18.5 mag in the MIR bands in terms of the AB magnitude. 50% completeness levels are about 19.8 mag at $3{\mu}m$, 18.6 mag at $9{\mu}m$, and 18 mag at $18{\mu}m$ band (in AB magnitude), respectively. In order to validate the detected sources, all of them are confirmed by matching tests with those in other bands. The 'star-like' sources, defined by the high stellarity and magnitude cut from the optical ancillary data, appear statistically to have a high probability of being stars. The nature of the various types of extragalactic sources in this field are discussed using the color-color diagrams of the NIR and MIR bands with the redshift tracks of galaxies providing useful guidelines.

• 천문학논총
• /
• 제27권4호
• /
• pp.145-146
• /
• 2012

We present the results from B-, R-, I-, J- and H-band observations of the NEP-Wide survey field. The NEP-Wide survey is an AKARI survey of the North Ecliptic Pole covering ~ 5 square degrees area. Our optical/NIR imaging supports the AKARI IR imaging data by providing a crucial coverage in the optical/NIR. The optical data were obtained in 2007 using the 1.5 m telescope and SNUCAM at Maidanak Observatory, Uzbekistan. The NIR data were obtained in 2008 with FLAMINGOS on the KPNO 2.1 m telescope. We used IRAF, SExtractor, SCAMP, and SWarp for reducing the raw data, I-band fringe pattern removal, astrometry, standard photometry calibration, and source detection. Our optical-NIR data reach the depths of B ~ 23.4, R ~ 23.1, I ~ 22.3, J ~ 21.05, and H ~ 20.64 AB mag at 5-sigma. Here, we present the astrometric accuracy, galaxy number counts, completeness, and reliability, as well as redshift tracks of some normal galaxies and quasars on the B - R vs. R - I color-color diagram. The photometric data are being used for identifying optical counterparts of the IR data provided by AKARI, studying their SEDs, and selecting interesting objects for spectroscopic follow-up studies.

• 천문학논총
• /
• 제27권4호
• /
• pp.153-159
• /
• 2012

We constructed an unbiased asteroid catalog from the mid-infrared part of the All-Sky Survey with the Infrared Camera (IRC) on board AKARI. About 20% of the point source events recorded in the IRC All-Sky Survey observations were not used for the IRC Point Source Catalog in its production process because of a lack of multiple detection by position. Asteroids, which are moving objects on the celestial sphere, are included in these "residual events" We identified asteroids out of the residual events by matching them with the positions of known asteroids. For the identified asteroids, we calculated the size and albedo based on the Standard Thermal Model. Finally we had a new brand of asteroid catalog, which contains 5,120 objects, about twice as many as the IRAS asteroid catalog.

• 천문학논총
• /
• 제27권4호
• /
• pp.275-279
• /
• 2012

We investigate the mid-infrared (MIR) to far-infrared (FIR) properties of a nearly complete sample of local active galactic nuclei (AGNs) detected in the Swift/Burst Alert telescope (BAT) all-sky hard X-ray (14-195 keV) survey, based on the cross correlation with the infrared survey catalogs of AKARI, IRAS and WISE. Out of 135 non-blazar AGNs in the Swift/BAT 9-month catalog, we obtain the MIR photometric data for 128 sources in either the 9, 12, 18, 22, and $25{\mu}m$ band. We find a good correlation between their hard X-ray and MIR luminosities ranging three orders of magnitude (42 < log ${\lambda}L_{\lambda}$(9, $18{\mu}m$) < 45), which is tighter than that with the FIR luminosities at $90{\mu}m$. Both X-ray unabsorbed and absorbed AGNs follow the same correlation, implying isotropic infrared emission, as expected in clumpy dust tori models rather than homogeneous ones.

• 천문학회지
• /
• 제38권2호
• /
• pp.179-182
• /
• 2005

We conducted an extremely wide field survey of z ${\~}$ 6 Lyman break galaxies (LBGs) to precisely derive their bright end surface density overcoming the bias due to cosmic variance. We selected out LBG candidates in the Subaru/ XMM-Newton Deep Survey Field (SXDS) over the total of ${\~}1.0\;deg^2$ sky area down to $z_{AB} = 26.0 ({\ge}3{\sigma},\;2'.0 aperture)$ using i' - z' > 1.5 color cut. This sample alone is likely to be contaminated by M/L/T dwarfs, low-z elliptical galaxies, and z ${\~}$ 6 quasars. To eliminate these interlopers, we estimated their numbers using an exponential disk star count model, catalogs of old ellipticals in the SXDS and other field, and a z${\~}$6 quasar luminosity function. The finally derived surface density of z ${\~}$ 6 LBGs was 165 $mag^{-1}\;deg^{-2}$ down to $z_{AB}$ = 26.0 and shows good agreement with previous results from the narrower field survey of HST GOODS.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2008년도 학술대회 1부
• /
• pp.801-806
• /
• 2008

본 논문에서는 증강현실 기술을 기반으로 증강 책이라는 응용 시스템을 제안한다. 증강 책은 실물 형태의 책을 사용하여 다양한 가상객체 및 가상공간에 대한 인터페이스 기능을 제공한다. 증강 책을 통해서 사용자는 입체적인 모습을 관찰할 수 있으며 또한 조작할 수 있다 가상 객체와의 조작을 위해서 페이지마커, 제어 마커, 참조 마커의 세가지 타입의 마커를 도입하였다. 마커를 움직이면서 사용자는 가상 객체를 조작할 수 있다. 실제 책의 내용이나 상품 카탈로그 등의 다양한 입체 컨텐츠들을 증강 책으로 제공할 수 있다. 본 논문에서 제안하는 증강 책은 실사 텍스쳐로 만든 포토 앨범 컨텐츠와 인테리어 컨텐츠 자동차 카탈로그 컨텐츠 등의 다양한 입체 컨텐츠의 제공에 사용될 수 있다.

• 천문학회보
• /
• 제40권2호
• /
• pp.29.3-30
• /
• 2015

We introduce an advanced one-to-one galaxy correspondence method that populates dark matter halos with galaxies by tracing merging histories of most bound member particles (MBPs) identified in simulated virialized halos. To estimate the survival time of a satellite galaxy, we adopt several models of tidal-destruction time derived from an analytic calculation, isolated galaxy simulations, and cosmological simulations. We build mock galaxy samples for each model by using a merging tree information of MBPs from our new Horizon Run 4 N-body simulation from z = 12 to 0. For models of galaxy survival time derived from cosmological and isolated galaxy simulations, about 40% of satellites galaxies merged into a certain halo are survived until z = 0. We compare mock galaxy samples from our MBP-galaxy correspondence scheme and the subhalo-galaxy scheme with SDSS volume-limited galaxy samples around z = 0 with $M_r-5{\log}h$ < -21 and -20. Compared to the subhalo-galaxy correspondence method, our method predicts more satellite galaxies close to their host halo center and larger pairwise peculiar velocity of galaxies. As a result, our method reproduces the observed galaxy group mass function, the number of member galaxies, and the two-point correlation functions while the subhalo-galaxy correspondence method underestimates them.

• 천문학논총
• /
• 제32권1호
• /
• pp.5-9
• /
• 2017

This paper provides an overview of the AKARI mission, which was the first Japanese satellite dedicated to infrared astronomy. The AKARI satellite was launched in 2006, and performed both an all-sky survey and pointed observations during its 550 days in the He-cooled mission phases (Phases 1 and 2). After the He ran out, we continued near-infrared observations with mechanical cryocoolers (Phase 3). Due to a failure of its power supply, AKARI was turned off in 2011. The AKARI data are unique in terms of the observed wavelengths as well as the sky coverage, and provide a unique legacy resource for many astronomical studies. Since April 2013, a dedicated new team has been working to refine the AKARI data processing. The goal of this activity is to provide processed datasets for most of the AKARI observations in a Science Ready form, so that more users can utilize the AKARI data in their astronomical research. The data to be released will include revised All-Sky Point Source Catalogues, All-Sky Image Maps, as well as high-sensitivity images and spectra obtained by pointed observations. We expect that the data will be made public by in the Spring of 2016.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.59-70
• /
• 2020

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.