• The KSFM Journal of Fluid Machinery
• /
• v.14 no.5
• /
• pp.31-38
• /
• 2011

Optimization using a hybrid multi-objective evolutionary algorithm coupled with response surface approximation has been performed to improve the performance of a transonic axial compressor with circumferential casing grooves. In order to optimize the operating stability and peak adiabatic efficiency of the compressor with circumferential casing grooves, tip clearance, angle distribution at blade tip and the depth of the circumferential casing grooves are selected as design variables. Three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model are discretized by finite volume approximations. The trade-off between two objectives with the interaction of blade and casing treatment is determined and discussed with respect to the representative clusters in the Pareto-optimal solutions compared to the axial compressor without the casing treatment.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.1
• /
• pp.91-98
• /
• 2017

Performance of a low speed axial compressor is enhanced through a proper configuration of blade row tip injection and casing treatment of groove type. Air injectors were mounted evenly spaced upstream of the blade row within the casing groove and were all aligned parallel to the compressor axis. The groove, which covers all the blade tip chord length, extends all-round the casing circumference. Method of investigation is based on solution of the unsteady form of the Navier-Stokes equations utilizing $k-{\omega}$ SST turbulence model. Extensive parametric studies have been carried out to explore effects of injectors' flow momentums and yaw angles on compressor performance, while being run at different throttle valve setting. Emphasis has been focused on situations near to stall condition. Unsteady numerical analyses for untreated casing and no-injection case for near stall condition provided to discover two well-known criteria for spike stall inception, i.e., blade leading edge spillage and trailing edge back-flow. Final results showed that with only 6 injectors mounted axially in the casing groove and at yaw angle of 15 degrees opposite the direction of the blade row rotation, with a total mass flow rate of only 0.5% of the compressor main flow, surprisingly, the stall margin improves by 15.5%.

• Mycobiology
• /
• v.36 no.1
• /
• pp.40-44
• /
• 2008

Various bacteria were isolated from the casing layer soil of the culture bed of P. ostreatus and their role in fruiting body induction of the edible mushroom, P. ostreatus, was investigated. Analysis of the bacterial community isolated from the casing layer soil revealed that the composition of genera and number of cultivable bacteria were different for each sterilizing treatment. Bordetella was predominant in the bulk soil whereas Flavobacterium was predominant after sterilization of the casing layer soil. Fluorescent Pseudomonas was predominant in the non-sterilized casing layer soil. Total number of the bacterial genera in the casing layer soil was higher than that in the bulk soil. In particular, an increase in the fluorescent Pseudomonas population was observed in the non-sterilized casing layer accompanied by induction of fruiting body and enhanced mushroom production yield. The results suggested that specific bacterial populations in the casing layer play an important role in the formation of primodia and the development of basidiome in P. ostreatus.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.66-71
• /
• 2008

Two cases with circumferential grooves were designed for a transonic compressor, and 3-D numerical simulations were conducted for stall mechanism at three representative speeds. A conclusion can be drawn from the comparison between compressors with or without casing treatment that: with the rising of rotation speed, stall margin increases dramatically under the help of casing treatments, and the case with middle grooves has reasonable compromise between stall margin increment and efficiency cutting. At lower speed, the increment reduces, and grooves at the back of blade tip have more influence on stall margin. Further investigation shows there is a transition in mechanism of compressor stall with the decline of rotational speed: at high rotation speed, the expansion of stall margin mainly results from the suppression of tip leakage vortex by casing treatments, yet it benefits more from the depression of boundary layer separation from suction surface of blade tip.

• Journal of Mushroom
• /
• v.12 no.3
• /
• pp.220-225
• /
• 2014

This study was conducted to set the proper sterilization standards of casing soil for the stable production of button mushroom(Agaricus bisporus) from mushroom disease that occurs in infection of casing soil material. Changes of aerobic bacteria are increased as the longer grow-out period and sharply increased after second flushes. Fluorescence Psuedomonas showed high density at high sterilization temperature and $100^{\circ}C$ treatment has extremely high density at 30 min and 60 min in casing 22 days. Density of thermophilic actinomyces is sharply increase from casing with soil and the highest density at 22 days of casing and rapidly decrease after first flushes. Sterilizing temperature of casing soil affects quality and quantity of button mushroom. Treatment of 60 min, 90 min at $80^{\circ}C$ and 30 min at $100^{\circ}C$ produced the highest mushroom yields, especially mushrooms yields of A grads were the highest at treatment of 90 min at $80^{\circ}C$. Treatment of 60min at $100^{\circ}C$ products many yields, however, this treatment has low economic feasibility for its yields. Sterilizing temperature of casing soil has an effect on generating diseases and insect pests. Treatment of 60 min, 90 min at $80^{\circ}C$ and 30 min $100^{\circ}C$ showed lower incidence than the other treatment. Although treatment of 30 min at $100^{\circ}C$ causes low diseases and mushroom fly damage, it has low mushroom yields. Furthermore, although treatment of 60 min at $100^{\circ}C$ has high mushroom yields, it causes high diseases and mushroom fly damage. Therefore the best conditions for the sterilization of casing soils was 60 min and 90 min at $80^{\circ}C$.

• Journal of the Korean Society of Safety
• /
• v.25 no.1
• /
• pp.22-26
• /
• 2010

Material degradation should be considered to assess integrity and residual life of high temperature equipments. However, the property data reflecting degradation are not sufficient for practical use. In this study, mechanical properties of 1Cr-1Mo-0.25V casting steel generally used for turbine casing were measured and variation of microstructure was observed. Degradation was simulated by isothermal heat treatment.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.51-55
• /
• 1998

After bottle culture of Pleurotus ostreatus, sawdust was taken out from the bottle and accumulated in the middle of March, and then composted. As the result, Y value was decreased rapidly 30 days after composting, and it was decreased slowly after 30 days. It is considered that 118 days is required for composting, however, it is possible to use for casing material after at least 48 days composting. The pH and total nitrogen content of sawdust based on composting period had tendency to increase as composting was processed. Total carbon and C/N rate had tendency to decrease as time went on. Based on the rate of 10, 30 and 50%, each sawdust was added to clay loam used as casing material for culturing A. bisporrus. Among various treatments, the mycelial growth of A. bisporus was more favorable in the treatment of 30% sawdust than in the single treatment of clay loam. Based on the date necessary for primodium formation of A. bisporus, the primodium formation in the treatment of 30% sawdust was reduced to about 5 days as compared with that of any other treatments When 30% sawdust was added to clay loam used as casing material for culturing A. bisporus, the yield of its fruiting body was increased to 28%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3722-3730
• /
• 2015

The performance improvement of a small centrifugal compressor for waste water treatment has been conducted by the design change of vaneless diffuser and volute casing. Existing two compressors use a common impeller, but the width and length of the vaneless diffuser and the cross-sectional shape of the volute casing are different, respectively. Based on the experiment of the existing two compressors and their CFD results, the design of the vaneless diffuser and the volute casing has been changed. It was found that the strength of the interaction among the volute tongues, the vaneless diffusers and the impellers of two existing/one improved compressors, was affected by the cross-sectional area and inlet radial length of the volute casing including system losses' change. The efficiency of the impeller with one existing design was increased as the decrease of the width of the vaneless diffuser, but losses at the diffuser were accumulated. In conclusion, approximately 2.88%p efficiency increase at the design point of the new compressor with the improved design has been confirmed by CFD analysis results.

• Journal of Power System Engineering
• /
• v.15 no.5
• /
• pp.22-29
• /
• 2011

In this study, the damage mechanism of large scale steam turbine due to water induction was analyzed and recovery characteristics were reviewed. A turbine consists of the rotating rotor and the stationary casing, and the clearance between them is very small for the efficiency enhancement. If water induction, while relatively cold steam or water is introduced into turbine, occurs, the considerable humping is caused at the casing near the initial water induction point and that induces the rubbing between rotor and casing. Finally, it leads to the catastrophic failure. Bowed rotor has the different characteristics in the recovery depending on damage degree. The elastic deformation due to light rubbing is recovered by turning the rotor with 3 rpm under normal operation condition, but most plastic deformation due to rubbing deforms the local microstructure and that results in permanent deformation which could not be recovered under normal operation condition. Bowed rotor has diverse characteristics depending on the recovery method, and the method is empirical and needs the cutting edge technology. Careful recovery treatment of the rotor will eliminate the risks and secure the high quality rotor similar to new rotor. If any critical error is made during the recovery, the rotor would not be recovered permanently and it should be scrapped.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.8
• /
• pp.669-675
• /
• 2015

In this study, we investigate the performance variations of an automotive turbocharger compressor with respect to the height variation of the recirculating casing treatment (RCT). We use three RCT heights, namely 1.2 mm, 1.5 mm, and 1.8 mm. We vary the compressor speed from 90,000 to 150,000 rpm, and the flow rate from 0.015 kg/s to 0.08 kg/s. The calculation results of the total pressure ratio and isentropic efficiency showed good agreement with the performance data provided by the manufacturer within a 0.7 percent error. The results showed that the RCT heights of 1.2 mm, 1.8 mm, and 1.5 mm, in that order, exhibited a more uniform pressure distribution, higher pressure ratio, and wider operational range. As the number of revolutions per minute increased, we obtained typical characteristics of a compressor map having a narrower operational range in the region of higher pressure ratio.