• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.4
• /
• pp.351-365
• /
• 2001

For accurate impression taking, accurate impression material, solid individual tray, and bond strength between impression materials and resin tray are important factors. The purpose of this study was to evaluate tensile bond strength of rubber impression materials to various tray resin materials. This study tested the time dependent tensile bond strength between commercial brands or poly ether, polysulfide, additional silicone impression materials and commercial brands of self curing tray resin. light activited tray resin when applying adhesive Resin specimens were made with 20mm in diameter, 2mm in thickness. 1 made total 360 specimens, 10 per each group and the tensile bond strength was measured by using the Instron($M100EC^{(R)}$, Mecmesin Co., England). The results were as follows ; Comparisons of various impression materials. 1. In case of Impregum $F^{(R)}$, the bond strength of tray resin was decreased in order of SR $Ivolen^{(R)}$, Ostron $100^{(R)}$ Instant tray $mix^{(R)}$, $Lightplast^{(R)}$. All groups excluding Ostron $100^{(R)}$, Instant tray $mix^{(R)}$ are significant difference (p<0.05). Drying time after applying adhesive, the tensile bond strength of tray resin was insignificantly decreased in order of 10 min drying time group. 1 min drying time group. 5 min drying time group. 2. In case of Permlastic $regular^{(R)}$ the bond strength of tray resin was insignificantly decreased in order of Ostron $100^{(R)}$. SR $Ivolen^{(R)}$, Instant tray $mix^{(R)}$ $Lightplast^{(R)}$. About drying time after applying adhesive, the tensile bond strength of tray resin was significantly decreased in order of 5 min drying time group, 10 min drying time group, 1 min drying time group(p<0.05). 3. In case of Exaflex $regular^{(R)}$. the bond strength of tray resin was decreased in order of $Lightplast^{(R)}$, SR $Ivolen^{(R)}$, Instant tray $mix^{(R)}$, Ostron $100^{(R)}$. $Lightplast^{(R)}$ was significant difference(p<0.05). About drying time after applying adhesive, the tensile bond strength of tray resin was decreased in order of 5 min drying time group, 10 min drying time group, 1 min drying time group(p<0.05). Especially 5 min ding time group was significant difference(p<0.05). According to the results of this study, we can see the greatest tensile bond strength when using Impregrm $F^{(R)}$ and Permlastic $regular^{(R)}$ with self curing tray resin, when using Exaflex $regular^{(R)}$ with light activated tray resin In my opinion, adhesive should be dried more than 5 min before impression taking to achieve the greatest tensile bond strength.

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.147-155
• /
• 2011

The purpose of this study is to grope for plan methods through analyzing preferences on expression methods of materials for visual differentiation in hosing space. The results are as follows : First, we could know that finish material is the important element to make differential design in housing space. It is a effective method to use the color and material of finish materials. Second, we could find they preferred woods in materials and Y color, N9.5, bright and light in colors through grasping preference about types in material elements. The preferred texture is soft and the preferred patterns are solid and geometry. Third, it is a good method to mix materials which give us different season feeling, and to mix colors which are different tones to lead the differential design by materials in housing space. In case texture and patterns, what we mix similar things is the effective method. Fourth, preference of the expression method is manifested differently depending on the selected elements. so when we plan the housing, we have to consider that. lastly, I think this study will be a basic data on a study to differentiate the design of the residential space.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.37 no.3
• /
• pp.135-150
• /
• 2012

This paper presents a portfolio model for a long-term power generation mix problem. The proposed portfolio model evaluates generation mix by considering the tradeoffs between the expected cost for power generation and its variability. Unlike conventional portfolio models measuring variance, we introduce Conditional Value-at-Risk (CVaR) in designing the variability with aims to considering events that are enormously expensive but are rare such as nuclear power plant accidents. Further, we consider uncertainties associated with future electricity demand, fuel prices and their correlations, and capital costs for power plant investments. To obtain an objective generation by each energy source, we employ the sample average approximation method that approximates the stochastic objective function by taking the average of large sample values so that provides asymptotic convergence of optimal solutions. In addition, the method includes Monte Carlo simulation techniques in generating random samples from multivariate distributions. Applications of the proposed model and method are demonstrated through a case study of an electricity industry with nuclear, coal, oil (OCGT), and LNG (CCGT) in South Korea.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.43-52
• /
• 2016

This paper presents the results of a engineering characteristic to the effect of drilling fluid with different mix designs for use in bore hole collapse prevention. The bore hole collapse prevention mechanism for the bentonite based drilling fluid was first discussed together with the effect of conditioning with different additives on engineering characteristics of bentonite based drilling fluid. As result, bentonite with polymer have a outstanding characteristics as compared to CMC Properties thickening effect In the case of sea water with attatulgite be superior to bentonite. Therefore, in this paper presented qualitative result on the performance of the drilling fluid depending on the water.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.558-562
• /
• 1988

The ethanol-and water-extracts of curled tops and stalks of young bracken (Pteridium aquilinum) fronds in raw and cooked states were examined for their mutagenicity by Ames test using Salmonella typhymurium mutants. Even a small amount of water extract from raw bracken was mutagenic to TA 1538 strain without addition of $S_9$ mix whereas a strong toxicity appeared at higher levels of the extractive. With $S_9$ mix, the water-extract from raw bracken was not mutagenic at all and not toxic to all strains tested, The amount of water-extract from cooked bracken was one-tenth of the amount from raw bracken and the water-extract showed no mutagenic effect to all strains tested. Ethanol-extract of bracken showed no mutagenicity in any case.

• Computers and Concrete
• /
• v.21 no.3
• /
• pp.249-259
• /
• 2018

The use of recycled aggregate in concrete is gaining much attention due to the growing need for sustainability in construction. In the present study, Self Compacting Concrete (SCC) is made using both natural and recycled aggregate (crushed recycled concrete aggregate from building demolished waste) and performance of recycled aggregate based SCC for the bond behaviour of reinforcement is evaluated. The major factors that influence the bond like concrete compressive strength (Mix-A, B and C), diameter of bar ($D_b=10$, 12 and 16 mm) and embedment length of bar ($L_d=2.5Db$, $5D_b$ and full depth of specimen) are the parameters considered in the present study in addition to type of aggregates (natural and recycled aggregates). The mix proportions of Natural Aggregate SCC (NASCC) are arrived based on the specifications of IS 10262. The mix proportions also satisfy the guidelines of EFNARC. In case of Recycled Aggregate SCC (RASCC), both the natural coarse and fine aggregates are replaced 100% by volume with that of recycled aggregates. These mixes are also evaluated for fresh properties as per EFNARC. The hardened properties like compressive strength, split tensile strength and flexural strength are also determined. The pull-out test is conducted as per the specifications of IS 2770 (Part-1) for determining the bond strength of reinforcement. Bond stress versus slip curves were plotted and a typical comparison of RASCC is made with NASCC. The fracture energy i.e., area under the bond stress slip curve is determined. With the use of recycled aggregates, reduction in maximum bond stress is noticed whereas, the normalised maximum bond stress is higher in case of recycled aggregates. Based on the experimental results, regression analysis is conducted and an equation is proposed to predict the maximum bond stress of RASCC. The equation is in good agreement with the experimental results. The available models in the literature are made use to predict the maximum bond stress and compare the present results.

• International Journal of Highway Engineering
• /
• v.18 no.5
• /
• pp.83-93
• /
• 2016

PURPOSES : The aim of this article is to compare and identify eco-friendly competitiveness between (regional) motorway and high-speed rail(HSR) from the perspective of $CO_2$ emission in the Republic of Korea. METHODS : In order for an analysis of low-carbon competitiveness between the two modes, $CO_2e$ emission, $CO_2eppk$ (equivalent $CO_2$ gram per passenger kilometer), is employed as a comparison index. As for HSR, the index is calculated based on the passenger transport data and the gross of $CO_2e$ produced by Kyungbu high-speed line in 2013. Additionally, the gross of $CO_2e$ is computed by the greenhouse gas emission factors of domestic electricity generation mix. Regarding the index of motorway, it is directly calculated using both the official $CO_2e$ emission factor and the passenger-car occupancy of motorway. RESULTS : The results revealed, in the case of inter-regional transport, that the $CO_2e$ emission of displacement-based cars is 54.9% less than that of HSR, as the domestic electric power systems heavily relies on the thermal power plants over 66%. Note that internal combustion engines commonly used for vehicles are more energy-efficient than steam-driven turbines usually utilized for thermal power generation. CONCLUSIONS : It can be seen, at the very least in our study, that HSR has no superiority over motorway in the case of $CO_2e$ emission under the situations of domestic electricity generation mix. In addition, advanced eco-friendly vehicles have strong advantages over HSR. Therefore, all-out efforts should be made to develop and harvest renewable energy sources in order to achieve low-carbon HSR, sparing fossil fuels.

• Journal of Korean Society for Quality Management
• /
• v.18 no.2
• /
• pp.69-80
• /
• 1990

This paper highlights the economic effects of nuclear power plants standardization in Korea. The major effects of nuclear power plants standardization appear in the reduction of time-related costs. By using this major economic effects of standardization, an optimal plant mix of electric power until the year 2005 is suggested by means of WASP computer model. And the effects between the standardized case and the non-standardized case is compared.

• IE interfaces
• /
• v.1 no.1
• /
• pp.1-7
• /
• 1988

This paper discusses the applicability of the decomposition principle to an LP (Linear Programming) problem. Through a case study on product mix problems in a chemical process of Korean Steel Chemical Co., Ltd., the decomposition algorithm, LP Simplex method and a modified method are compared and evaluated in computation time and number of iterations.

• Journal of Korean Institute of Industrial Engineers
• /
• v.1 no.1
• /
• pp.41-56
• /
• 1975

In the past the pattern of business down-trend usually appeared in the form of, first, decrease in facility investment, then decrease in inventory level, followed by reduced level of consumption. But the pattern nowadays is becoming just the opposite, that is, first, consumption decrease, then inventory level increase, followed by restriction of facility investment. Also in the past, the greater effort was placed in strengthening of hardware areas through optimization and modernization of production means on the premise of sales. But lately software areas take most of the main effort to establish production mean with sales as its objective. Under these circumstances one of the real problems facing production activities today is the conflicting relationship between sales and production functions. This occurs due to differences of their view points. Then, in order to achieve maximum profit at the least cost, which is the ultimate objective of a production activity, the need arises to effectively coordinate sales demand and plant production capacity. For this purpose strong control means and function must be devised. In our case study example we illustrate a management technique for a combined planning function, of optimal coordination of product mixes utilizing a computerized linear programming model as control means of attaining maximum profit. It is hoped that this example help achieve some of corporate objectives.