• 한국지반공학회논문집
• /
• 제36권12호
• /
• pp.69-76
• /
• 2020

Back-to-Back 보강토옹벽은 좁은 구간에 양립하는 옹벽의 형식을 가지기 때문에 벽체간의 이격거리에 따라 보강재가 겹치게 되어 보강재 간의 상호작용에 의한 응력 변화와 일체화된 상태에서 전체가 거동하는 문제 등으로 설계단계에서 신중한 접근이 필요하나 현재 국내에 정형화된 설계기준이나 지침이 전무한 상태이다. 본 연구는 이러한 Back-to-Back 보강토옹벽에 대해 옹벽폭 대 높이비(옹벽폭비, Wb/H)에 따른 최적 보강길이비에 대해 고찰하였다. 옹벽폭비는 FHWA 설계기준의 Case II에 해당하는 1.1H, 1.4H, 1.7H, 2.0H, 높이는 일반적으로 가장 많이 적용되고 있는 3.0m, 5.0m, 7.0m, 10.0m를 대상으로 하였으며, 각 조건에서 수치해석을 통해 FHWA 설계기준의 적정성과 옹벽의 높이 및 옹벽폭비에 따른 최적 보강길이비를 제안하였다.

• International Journal of Internet, Broadcasting and Communication
• /
• 제15권2호
• /
• pp.60-72
• /
• 2023

The purpose of this study is to measure the change in evacuation time at high schools according to the change in hallway width using an evacuation simulation program and to analyze the result of such change. In order to measure the evacuation time according to the change in the hallway width according to the 「Rules on the Standards for Evacuation and Fire Protection Structures of Buildings」 and to analyze the change in evacuation time resulted from the increase in the number of occupants, a scenario was constructed by applying the 「performance-oriented design method and standard for firefighting facilities, etc.」. As a result of the experiment, it was found that the evacuation time was the shortest when the width of the hallway was the widest, which was 3m. On the other hand, the evacuation time took the longest at 1.8m, which was the width of the second narrowest hallway. For the safety of high school students who spend a lot of time at school, it is necessary to secure a wide hallway width when building a new school or to provide periodic safety education in the case of an existing school whose hallways are considered narrow.

• 열처리공학회지
• /
• 제6권4호
• /
• pp.230-236
• /
• 1993

The laser beam hardening has been experimentally tried to find the hardened characteristics of STD11. Experiment was performed on the optimum hardening condition with 2kW $CO_2$ laser. The microstructure of the hardened layers was observed using the microscope. The hardened zones exhibits very high Vickers microhardness of 720 Hv, however, the deoxidation was observed under the surface of hardened area. The case depth of hardened zones is about 0.6mrn and case width is 4mm. FEM-simulation on laser surface hardening of STD11 steel are described. With the proper assumption of the absorbed energy density, the calculated case depth and width in 2 kW $CO_2$ laser hardening were in good agreement with the experimental result. It was found that there is optimum absorbed energy density of STD11.

• 열처리공학회지
• /
• 제8권1호
• /
• pp.24-31
• /
• 1995

Heat flow equation and FEM have been used to calculate the hardening section of material in laser transformation hardening. SCM440 used as the diesel engine piston of vessel has been hardened by a $CO_2$ laser with the wavelength of $10.6{\mu}m$. The specimens were inclined from 0 to 70 degree to investigate the characteristics of laser hardening. The geometrical factor of heat flow equation affects the size of hardening area. The case width decreased with increasing travel speed and the case width increased with increasing inclined angle. Maximum case depth was achieved about 1.0mm and maximum hardness of laser hardened area was of 2.8 times than that of base metal. Experimental data show good agreement with the theoretical calculations for given laser hardening conditions.

• 패션비즈니스
• /
• 제9권1호
• /
• pp.79-88
• /
• 2005

The purpose of this study is to propose the design of the patient's clothes for a disabled child between 4 and 6. For this, in this study, I would present the following design plan which includes 3 upper garments, 2 trousers and a one-piece dress. In case of the damage on head and neck, a neck line should be deep and wide thereby providing ease to the clothes. To facilitate injection and dressing/undressing, there should be parting from neck to cuff which can be fixed by snap or button. By rolling up sleeves with strings inside the cuffs and fixating plaster cast with snap button outside the cuffs. In case of body cast with plaster cast around body part, front adjusting part should be wider and the width should be adjusted with strings. In case of hip spica cast which covers waist, I separated front part and rear part, fixated them with snap buttons, gave more width to front adjusting part with strings to adjust width, which constitute one-piece dress. In case of shoulder spica cast, the other shoulder which is not covered with plaster cast should be exposed, and to prevent clothes' coming down, strings with snap button or velcro should be attached over a shoulder so that the length of the strings can be adjusted. In case of applying plaster cast or aid to the whole part of a leg, one part of trousers should be shorter so as to expose the injured part and there should be a parting with strings or velcros on the side for easy dressing/undressing. When plaster cast or splint is short, The strings are meant to adjust length of trousers. The partings are located 2 cm from side lines toward the center.

• 복식문화연구
• /
• 제5권4호
• /
• pp.112-129
• /
• 1997

This research, focused on the curved of the lower body, designated abdomen and hip gradient, crotch depth and crotch width the factors for which are able to influence on the appearence and the function of Divided Skirt and analized the changes when that were applied to a real pattern, and so the purpose of this research is to show the basic documents needed to design a Divided Skirt pattern fitting with the wear purpose and usage. The following are the results of this research. 1. The abdomen and hip gradient turned out as the most influential factor on the appearance and the function of Divided Skirt. The pattern of which the abdomen and hip gradient was designated as vertical zero degree, showed an excellent appearance and in case of function, the pattern of which thw angle of the abdomen and hip gradient of human body type was applied to itself without a particular designation turned out excellent. 2. In case of crotch depth, the pattern which had crotch depth＋2㎝, had a better appearance but influced nothing on function. 3. The factor of crotch width didn\`t have any influence on the appearance and function of Divided Skirt. 4. Referring to the results of the above, the Divided Skirt pattern of which the appearance and the function turned excellent, had the angle of abdomen gradient 4 degrees, the angle abdomen gradient 4 degrees, the angle of hip gradient/2+2.5 degrees, crotch depth+2㎝ and crotch width following human body type. In case of Divied Skirt worn when going out, the pattern which had the angle of abdomen and hip gradient vertical zero degree, crotch depth+2㎝ and crotch width following human body type, turned out suitable. Also, the suitable pattern of Divided Skirt for working had the abdomen and hip gradient following human body type, crotch depth+2㎝ and covering girth diameter/2±1㎝.

• 한국농공학회지
• /
• 제12권3호
• /
• pp.2019-2028
• /
• 1970

1. 트랙터에 의(依)한 효율적(效率的) 경기방법(耕起方法)을 실험(實驗) 고찰(考察)하여 다음과 같은 결과(結果)를 얻었다. 가. 포장내측경기(圃場內側耕起)에 있어서 선회소요시간(旋回所要時間)을 최소(最少)하는 효율적(效率的) 선회법(旋回法)은 선회간격(旋回間隔)이 zr(r=최소선회반경(最少旋回半徑))보다 작을때는 Q 자형(字型), 클때는 U 자형(字型)이다. 나. 포장내측경기(圃場內側耕起)의 단위선회구(單位旋回區) 건(巾) w는 2.5r 시(時) 가장 효율적(效率的)이다. 다. 포장주변부(圃場周邊部) 경기(耕起)에 있어서는 W>-0.0345L + 35.84 시(時)는 혼합경법(混合耕法)이 능률적(能率的)이고 W<-0.0345 + 35.84 시(時)는 반접속경법(半接續耕法)이 능률적(能率的)이다. 라. 포장주변부(圃場周邊部)의 건(巾)l는 내측경기시(內側 耕起時)와 주변경기시(周邊耕起時)에 있어서 모두 적을수록 효과적임으로 최소치(最少値)인 2r가 가장 적합(適合)하다. 2. 트랙터에 의(依)한 단위포장(單位圃場)과 경기능률(耕起能率)과의 관계(關係)를 고찰(考察)하여 다음과 같은 결과(結果)를 얻었다. 가. 종횡비(縱橫比)$\frac{L}{W}$ 및 면적(面積) A가 크면 일반적(一般的)으로 경기능률(耕起能率)은 증가(增加)한다. 나. 경기능률(耕起能率)의 증가율(增加率)은 종횡비(縱橫比) 및 면적(面積)이 크면 클수록 증가율(增加率)이 점차적으로 감소(減少)한다. 다. $\frac{L}{W}-T$ 곡선(曲線)에서 $\frac{L}{W}$에 대(對)한 T의 변화(變化)가 큰 범위(範圍)는 대략(大略) 20a에서 6, 30a에서 5, 50a에서 4, 80a에서 3, 100a에서 2.5 이내(以內)이다. 라. T-A 곡선(曲線)의 변화율(變化率)은 $\frac{L}{W}$의 영향(影響)을 받으나 대략(大略) $T=A^{-\frac{2}{3}}$ 곡선(曲線)의 변화율(變化率)과 같다. 마. 종횡비(縱橫比)가 3이상(以上)일때는 면적(面積)의 크기에 상관(相關)없이 경기능률(耕起能率)에 미치는 10a 면적증가(面積增加)의 효과는 약(約) 5 정도(程度)의 종횡비(縱橫比) 증가효과와 같다. 바. 종횡비(縱橫比)가 $2{\sim}3$일때는 면적(面積)의 크기에 상관(相關)없이 경기능률(耕起能率)에 미치는 10a 면적증가(面積增加)의 효과는 약(約) $4{\sim}2$ 정도(程度)의 종횡비(縱橫比) 증가효과와 같으면 이는 종횡비(縱橫比)가 적을수록, 면적(面積)이 클수록 차차(次次) 감소(減少)한다.

• 대한물리의학회지
• /
• 제4권4호
• /
• pp.269-274
• /
• 2009

Purpose：The purpose of this study is an interval palmar width according to change of muscle activation under push-up movement. Methods：Three, this study participation normal young adult (male 3, mean age ; 24yaers). The subject performed maximum contraction under push-up movement. EMG activaty patterns is measured with three different width. The EMG activity of pectoralis major and latissimus dorsi were measured using surface electromyography. Results：EMG activation of pectoralis major and latissimus dorsi following of push-up was shown significant difference(p<.05). Also, experiment value was agree with calculation value and width of shoulder position was minimum of pectoralis major and latissimus dorsi muscle activity. Conslusion：RMS values in case of fretum and wide width of the hands on Latissimus Dorsi are shown muscle activity $132{\mu}V$ and $173.5{\mu}V$, respectively. Especialy, RMS value in terms of wide width of the hands on muscles is shown very enhanced muscle activity. It is suggest that interval palmar width of the hands on pectoralis major and latissimus dorsi in push-up movement was effective to intensify of the muscle activity.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.51-56
• /
• 2011

The train travels on the track and, thus, the rear wheels precisely follow the paths of the front wheels. On the contrary, in the vehicles running on the road like automobiles, buses and trucks, the front wheels try to drag the rear ones toward them and across the inside of the curve. Off-tracking is defined as the radial offset between the path of the centerline of the front axle and the path of the centerline of the following axle. In the case of the bimodal tram with AWS(all wheel steering), the off-tracking decrease but the rear swing-out values increase because of the rear steering at the reverse phase angle. Thus, in order to determine the swept path width, maximum road width at the minimum turning radius, off-tracking and swing-out should be considered for the bimodal tram. In this paper, trajectory simulations were carried out for the various condition such as front steering, front and rear steering and suppression of swing-out to optimize the swept path width.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.869_870
• /
• 2009

This paper presents optimal design of tooth and yoke width for increasing torque density when designing concentrated winding Interior Permanent Magnet Synchronous Motor(IPMSM) which is used currently. In case of IPM, characteristic of motor chages according to saturation, thus design consib dering saturation should be done. This paper proposed method to decide tooth and yoke width using magnetic equivalent circuit with calculated magnetic resistance. This method provide less effort and time than FEM using optimal design when deciding tooth and yoke width. Proposed method and FEM are compared and verified.