• Magazine of the Korean Society of Agricultural Engineers
• /
• v.16 no.2
• /
• pp.3361-3394
• /
• 1974

The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.4
• /
• pp.4-14
• /
• 1974

The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

• Journal of agricultural medicine and community health
• /
• v.1 no.1
• /
• pp.10-21
• /
• 1976

The traditional application of night soil to vegetable gardens and rice paddies results in a most wide spread condition of parasitism, with a variety of helminths found in Korea. In addition to the above fact, the peculiar habit of the consumption of raw vegetables, fish, crustaceans and mammals provides a means of infestations of helminths. During the last sixty years numerous reports were found on the prevalence of helminths amongst the Korean population in different parts of the country, and it was generally recognized that ascariasis, hookworm disease, filariasis, clonorchiasis and paragonimiasis constitute the important helminthic disease in Korea. In practical measures of parasite control activities the main measures are summarized as mass-treatment, night-soil disposal and transmission control. Among the three, the mass-treatment has been commonly applied, however, no reduction of transmission has been obtained by treatment of a population. Therefore, the ultimate eradication of parasites will depend upon the application of comprehensive environmental sanitation measures. The basic environmental measures will be concerned with (a) the safe disposal of human excreta, (b) the provision of adequate and safe water supplies in such a way as to promote a higher standard of personal hygiene in the population, and (c) the prevention of food contamination by faecal material. Additional environmental measures will deal with the improvement of housing and housing hygiene and with general community development. Community development means social and cultural as well as economic development. The control measures on the parasitic endemic diseases, such as clonorchiasis and paragonimiasis are the good examples for community health development in Korea. The control of Clonorchis and Paragonimus infections are theoretically very simple, as the infection can only invade the human body by way of encysted metacercaria which are taken into the body when eating passive intermediate hosts(fishes, crabs and crayfishes). Although prophylactic measures in the case of the infections deal with above merely consist the fishes in cooking or submerging in hot water before eating them, it is exceedingly difficult to carry out such simple measures in face of century old traditions, to which the relatively primitive population clings with great tenacity. There is no one universally applicable method of control. The choice of methods must be dictated by the nature of the environment. the habit and custom of the people. the pattern of transmission and the resources of the country. There must exist a well organized public health infrastructure. Since a control programme is of necessity on a longterm basis and continuity in its implementation is essential. An investigation should be made on the prevalence of the diseases and its relationships to irrigation engineering, freshwater ecology, agricultural methods, hydro-electric schemes, and the development of communities in affected areas. In conclusion, however. the control of clonorchiasis and paragonimiasis in Korea is not an impossible task. A combination of efforts with major emphasis on health education and mass chemotherapy coupled with governmental aid in enforcing legislative public health measures could reduce the diseases. Health education in particular attempts following four things: (a) It supplies a person with enough general knowledge about a disease to make the preventive measures. (b) It makes a person feel sufficiently about the importance of his own health to make him alter his behavior and adopt these preventive measure. (c) It makes him concerned for the health others. (d) It tries to make him feel so strongly about the first three that be supports and even initiates preventive action by the community. Educational efforts should be directed primarily toward school children because it is during the early years that most persons become infected, and also because children are less entrenched in their food habits so that, the educational process should be involved at various levels in successive changes of knowledge, attitude, beha viour, habit and custom of their lives. The most parasitic endemic diseases are related to community diseases. In caring for a sick community. the first stage is to gather epidemiological data, the next is to make inferences from it-to make the community diagnosis. The third is to prescribe community treatment or community health action part of a community health action programme. The community health action is the sum of the steps decided upon to remedy the critical features revealed by the community diagnosis. Action takes various forms; health education is the most important.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.45-72
• /
• 2005

C. neoformans-associated cryptococcosis is primarily a disease of immunocompromised persons, has a world-wide distribution, and is often spread by pigeons in the urban environment. In contrast, C. gattii causes infection in normal hosts, has only been described in tropical and semi-tropical areas of the world, and has a unique niche in river gum Eucalyptus trees. Cryptococcosis is acquired through inhalation of the yeast propagules from the environment. C. gattii has been identified as the cause of an emerging infectious disease centered on Vancouver Island, British Columbia, Canada. No cases of C. gattii-disease were diagnosed prior to 1999; the current incidence rate is 36 cases per million population. A search was initiated in 2001 to find the ecological niche of this basidiomycetous yeast. C. gaftii was found in the environment in treed areas of Vancouver Island. The highest percentage of colonized-tree clusters were found around central Vancouver Island, with decreasing rates of colonization to the north and south. Climate, soil and vegetation cover of this area, called the Coastal Douglas fir biogeoclimatic zone, is unique to British Columbia and Canada. The concentration of airborne C. gattii was highest in the dry summer months, and lowest during late fall, winter, and early spring, months which have heavy rainfall. The study of the emerging colonization of this organism and subsequent cases of environmentally acquired disease will be informative in planning public health management of new routes of exposure to exotic agents in areas impacted by changing climate and land use patterns. Cryptococcosis is an infection associated with an encapsulated, basidiomycetous yeast Cryptococcus neoformans. The route of entry for this organism is through the lungs, with possible systemic spread via the circulatory system to the brain and meninges. There are four cryptococcal serogroups associated with disease in humans and animals, distinguished by capsular polysaccharide antigens. Cryptococcus neoformans: variety grubii (serotype A), variety neoformans (serotype D), and variety gattii (serotypes B and C) (Franzot et at. 1999). C. neoformans variety gattii has recently been elevated to species status, C. gattii. C. neoformans val. grubii and var. neoformans have a world-wide distribution, and are particularly associated with soil and weathered bird droppings. In contrast, C. gattii (CG) is not associated with bird excrement, is primarily found in tropical and subtropical climates, and has a restricted environmental niche associated with specific tree species. (Ellis & Pfiffer 1990) Ellis and Pfeiffer theorize that, as a basidiomycete, CG requires an association with a tree in order to become pathogenic to mammals. In Australia, CG has been found to be associated with five species of Eucalypts, Eucalyptus camaldulensis, E. tereticornis, E. blakelyi, E. gomphocephala, and E. rudis. Eucalypts, although originally native to Australia, now have a world-wide distribution. CG has been found associated with imported eucalypts in India, California, Brazil, and Egypt. In addition, in Brazil and Columbia, where eucalypts have been naturalized, native trees have been shown to harbour CG (Callejas et al. 1998; Montenegro et al. 2000). In British Columbia, Canada, since the beginning of 1999, there have been 120 confirmed cases of cryptococcal mycoses associated with CG in humans, including 4 fatalities (data from British Columbia Centre for Disease Control), and over 200 cases in animal pets in BC (data from Central Laboratory for Veterinarians). What is remarkable about the BC outbreak of C. gattii-cryptococcosis is that all of the cases have been residents of, or visitors to, a narrow area along the eastern coast of Vancouver Island, BC, from the tip of the island in the south (Victoria) to Courtenay on the north-central island as illustrated in Figure 1. Of the first 38 human cases, 58% were male with a mean age of 59.7 years (range 20 - 82): 36 cases (95%) were Caucasian. Ten cases (26%) presented with meningitis, the remainder presented with respiratory symptoms. Cultures recovered from cases of cryptococcosis associated with the outbreak were typed as serogroup B, which is specific to CG (Bartlett et al. 2003). This was the first reported outbreak of CVG in Canada, or indeed, the world. Where infection with CG is endemic, for example, Australia, the incidence of cryptococcosis ranges from 1.8 - 4.7 per million between the southern and northern states (Sorrell 2001). However, the overall incidence of cryptococcosis in immunocompenent individuals has been estimated at 0.2 per million population per year (Kwon-Chung et al. 1984). The population of Vancouver Island is approximately 720,000,consequently, even if the organism were endemic, one would expect a maximum of 0.15 cases of cryptococcal disease annually.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.4 no.1
• /
• pp.81-91
• /
• 1968

To investigate the effects of foliage clipping time, degree, and nitrogen top-dressing after clipping on the growth and the agronomic characteristics, rice plants grown under ordinary cultural practices were clipped at the maximum tiller stage, 10 days prior to, and after that stage, respectively, with varying clipping, height, as 0, 1/3, 1/2, and 2/3 of plant height. And nitrogen was top-dressed at the rate of 0, 2, 4, 6 kg per 10 are immediately after clipping. The variety used was ＂Jinheung＂. The results obtained are outlined as follows: 1. Effect of clipping on the growth of rice plant: The subsequent growth was quite rapid during 10 days after clipping, and resulted, on the whole, in nearly complete recovery of defoliation by 20 days after clipping. a) Generally, the later the clipping time, the more growth accelerated. Rice plants clipped before the differentiation of ear primordia nearly recovered the damage, and in certain cases exceeded non-clipped plants in height. But the height of the rice plant clipped after the differentiation of ear primordia was somewhat smaller than that of non-clipped. b) Growth rate was rather rapid in the case of severe cutting, and the height of slightly clipped plants was taller than that of non-clipped plants. However, rice plants clipped to the extent of 2/3 of plant height did not fully recover the damage of defoliation compared to non-clipped plants. c) Nitrogen dressing was effective to rapid recovery of defoliation, the effect increasing with the increasing amount of application. d) Ear-heading was delayed in clipped plots, and this tendency was more apparent with later clipping time, more severe clipping, and increased amounts of nitrogen application after cutting. The range was 6 days at maximum. 2. Effect of defoliation on the yield and its components of rice plants: The yield response to clipping varied somewhat with its time, degree, and nitrogen application after cutting: yield increase of about 10% and decreasement of about 25% at maximum compared to the control plot. Grain yield of most plots was decreased. a) Clipping before the differentiation of ear primordia did not much affect the agronomic characteristics of rice plants. However, clipping after that growth stage decreased culm length, number of panicles, number of spikelets per panicle, and maturing rate of grain to some extent. Consequently this treatment resulted in decrease of about 10% in grain and straw production in spite of increase in panicle length and effective tillering rate. b) Slight, clipping decreased number of spikelets per panicle a little, and the yield of grain and straw by 4-5%, although effective tillering rate was somewhat increased. With severe clipping, panicle kngth, number of panicles, and number of spikelets per panicle decreased more, and the yield of grain and straw decreased about 10%. c) Nitrogen dressing after clipping at the rate of 2 kg per 10 are was effective in increasing grain yield. Nitrogen application over the rate of 4 kg per 10 are increased culm length, number of spikelets per panicle, and straw production, but this decreased the maturing rate, and the 1, 000-grains weight to some extent and resulted in decrease of grain yield.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.12-16
• /
• 2015

Purpose Principal component analysis (PCA) is a method often used in the neuroimagre analysis as a multivariate analysis technique for describing the structure of high dimensional correlation as the structure of lower dimensional space. PCA is a statistical procedure that uses an orthogonal transformation to convert a set of observations of correlated variables into a set of values of linearly independent variables called principal components. In this study, in order to investigate the usefulness of PCA in the brain PET image analysis, we tried to analyze C[11]-PIB PET image as a representative case. Materials and Methods Nineteen subjects were included in this study (normal = 9, AD/MCI = 10). For C[11]-PIB, PET scan were acquired for 20 min starting 40 min after intravenous injection of 9.6 MBq/kg C[11]-PIB. All emission recordings were acquired with the Biograph 6 Hi-Rez (Siemens-CTI, Knoxville, TN) in three-dimensional acquisition mode. Transmission map for attenuation-correction was acquired using the CT emission scans (130 kVp, 240 mA). Standardized uptake values (SUVs) of C[11]-PIB calculated from PET/CT. In normal subjects, 3T MRI T1-weighted images were obtained to create a C[11]-PIB template. Spatial normalization and smoothing were conducted as a pre-processing for PCA using SPM8 and PCA was conducted using Matlab2012b. Results Through the PCA, we obtained linearly uncorrelated independent principal component images. Principal component images obtained through the PCA can simplify the variation of whole C[11]-PIB images into several principal components including the variation of neocortex and white matter and the variation of deep brain structure such as pons. Conclusion PCA is useful to analyze and extract the main pattern of C[11]-PIB image. PCA, as a method of multivariate analysis, might be useful for pattern recognition of neuroimages such as FDG-PET or fMRI as well as C[11]-PIB image.

• Journal of Chest Surgery
• /
• v.29 no.8
• /
• pp.816-821
• /
• 1996

Lung transplantation is the established treatment for the end stage lung disedse find preservation of the organ is a major obstacle In performing lung transplantation. For solving this problem, we evaluated the histopathologic changes for various preservation solutions. Male mongrel dogs of similar size and weight (15∼20 kg) were used. The dog lungs were flushed with 4fl normal saline(group 1 'n:5): Modified Euro-Collins solution(group 2 n:5) and University of Wisconsin solution (group 3 : n=6), 60m11kg through a catheter placed in the main pulmonary artery aft r flushing of PGE 1 (20ng1kg). The lungs were preserved for 60 hours and measured dry and wet weights. Histologic specimens were taken every 6 hours and %toed for light microscopic evaluation. The edema ratio of the lungs peaked in 12 hours although there was no difference between the groups. Histologically, alveolar septal changes developed in one case (20%) after 1 hour preservation with normal saline. In case of the University of Wisconsin solution, the alveolar septal distortions and swellings were seen in 1 cases (20%) after 6 hours preservation compared with 3 cases (60%) after 6 hours preservation with Modified Euro-Collins solution. Changes of the pneumocytes were observed after 24 hours preser- vation in group 1, after 48 hours preservation in group 2 and after 60 hours preservation in group 3. We conclude that University of Wisconsin solution might have a superior preservation effect compare to normal saline and Modified Euro-Collins solutions.

• Journal of Preventive Medicine and Public Health
• /
• v.29 no.3 s.54
• /
• pp.617-637
• /
• 1996

Occupational dermatosis is one of the most prevalent occupational disorders. However, the extent of the occupational dermatoses including incidences and prevalencies of each disease entity, and etiologic materials are not yet welt stated in Korea. Authors reviewed the literatures on the statistic data and reports on the occupational dermatoses, and surveyed on the occupational dermatoses in two factories, and surveyed the physicians responsible to the occupational dermatoses with formed questionnaire. The results are as follows; 1. Among medical journals published since 1964, there were 31 articles on the occupational dermatoses. Of 31 articles, 18 were case reports and all others were review articles. Of 18 case reports, 9 were epidemiologic survey. The Workers' Periodic Health Examinations revealed that prevalence of the occupational dermatoses was highest(4.36 per 10,000 workers) in 1974, but number of the cases reported were decreased sharply since 1978 with some tendency to increase since 1981. There were 2,240 reported cases of occupational dermatoses between 1966 and 1992, which is 1.90% of all the reported occupational diseases. Skin infection and injuries due to chemicals were most frequent and there were 6 cases of skin cancer. 2. In an epidemiological survey on the dermatoses among 995 workers in a metal product manufacturing factory and 225 workers in a coal chemical factory, there were 794 with dermatomycosis, 296 workers with acne, 130 workers with scar, 123 workers with deformity of toe nails. Scars, photosensitivity dermatitis, deformity of finger and toe nails, and acne were more prevalent in the metal product manufacturing factory(p<0.05). In the metal prouct manufacturing factory, workers treating organic solvents and oils had more dermatoses than those without treating the materials(p<0.05). On the skin patch performed on 16 workers in the metal product manufacturing factory, there were 8 cases of irritation dermatitis and 5 cases of contact dermatitis. Prevalence of contact dermatitis in the metal product manufacturing factory was 1.3%. 3. On the questionnaire survey, 34 dermatologists, 29 doctors of preventive medicine, and 22 family physician replied. The proportion of occupational etiology among all dermatoses assumed by the physicians were below 9%, and the most important occupational dermatosis in Korea was contact dermatitis. Main etiologic materials related to the occupational dermatosis were organic solvent, acid and alkali, and metals. The reason for the scarcity of report of occupational dermatoses were difficulty in diagnosis and physician's ignorance of the occupational etiology. They replied that to prevent the occupational dermatoses in the workplace, the use of protective devices was most important, and development of diagnostic criteria on the occupational dermatoses is urgent. Above results shows us that there is many workers with occupational dermatoses, but they are mostly unreported. Measures to prevent and manage the occupational dermatoses are not satisfactory at present. Hence, authors suggest measures for the precise diagnosis, report and prevention of the occupational dermatoses. a. Dermatologist, preventive physician, and industrial hygienist should work as a team to examine the high risk group and establish the preventive measures. b. Disease entities, diagnostic criteria of occupational dermatoses should be listed, criteria for the compensation and job fitting at recruitment should be established, and manual for the proper treatment and effective prevention of each occupational dermatosis should be developed. c. Patch test antigens against each occupational category should be developed and it should be available to any physicians responsible. d. To facilitate the diagnosis of occupational dermatoses by the doctors responsible for the Workersr Periodic Health Examination, development of standardized questionnaire, education on the techniques of the patch test, and cooperation with the dermatologist in diagnosis of occupational dermatoses is essential.

• Applied Biological Chemistry
• /
• v.13 no.3
• /
• pp.219-222
• /
• 1970

Riboflavin in the various materials which used for Takju brewing was determined and its quantitative changes in the Takju mashes which were mashed with polished rice and wheat flour respectively using Nuruk only for enzyme source, and with wheat flour and corn powder respectively using Nuruk and Koji, were checked at 24 hours intervals during the whole brewing period. The results obtained were as follows. a) The riboflavin contents in 100 grams of each materials were: Polished rice $46.9{\gamma}$ Wheat flour $67.3{\gamma}$ Corn powder $73.9{\gamma}$ Nuruk $169.0{\gamma}$ Koji of wheat flour $87.1{\gamma}$ Koji of corn powder $84.4{\gamma}$ b) About 30 to 40 percent of riboflavin in the polished rice, wheat flour and corn powder were losed by steaming at 10 pounds for 50 minutes. c) Riboflavin content in the plots used Nuruk only was decreased during 3 days after mashing and then increased markedly after 5 days and, more or less, decreased after 6 days. Quantitative changes of riboflavin in the plots used Nuruk and Koji showed a rugged curve without decreasing in early stages, and its content was also increased markedly 5 days after mashing and then decreased a little after 6 days. d) Approximately $82{\gamma}$ of riboflavin was determined in 100ml. of the ripened mash of the rice plot and $72{\gamma}$ in the wheat flour plot in the case of using Nuruk only. $88.6{\gamma}$ of riboflavin were determined in 100ml. of the ripened mash of the wheat flour plot and $83.6{\gamma}$ in the corn powder plot in the case of using Nuruk and Koji. e) It was assumed that $28.8{\gamma}$ to $41{\gamma}$ of riboflavin were contained in 100 ml. of finished Takju of the two plots used Nuruk only and 33.6 to 44.5${\gamma}$ in the both two plots used Nuruk and Koji. f) About $47.3{\gamma}$ of riboflavin were determined in 100 grams of Takju cake of the rice plot and $66.2{\gamma}$ in the wheat flour plot used Nuruk only, and $62.9{\gamma}$ in the corn powder plot and $64.5{\gamma}$ in the wheat flour plot used Nuruk and Koji.

• The Journal of Korean Society for Radiation Therapy
• /
• v.18 no.2
• /
• pp.105-112
• /
• 2006

Purpose: To demonstrate that water bolus in the patient surface can decrease the dose inhomogeneity by patient surface large tissue defect when the surface is in an electron-beam field. And We tried to find a easy way to water control. Methods and Materials: To demonstrate the use of water bolus in the irregular surface clinically, the case of a patient with myxofibrosarcoma of the chest wall who was treated with electrons. We obtained dose distribution using missing tissue option of PINACLE 6.2b (ADAC, USA). We fabricate a Mev-green for water bolus in patient with defect of tissue. Then put the water bolus which is vinyl packed water into the designed Mev-green. We peformed CT scan with CT-simulator. Three-dimensional (3D) dose distributions with and without water bolus in the large irregular chest wall were calculated for a representative patient. Resulting dose distributions and dose-volume histograms of water bolus were compared with missing tissue option and non bolus plans. We fabricate a new water control device. Results: Controlled Water bolus markedly decrease the dose heterogeneity, and minimizes normal tissue exposure caused by the surface irregularities of the chest wall mass. In the test case, The non bolus plan has a maximum target dose of 132%. After applying water bolus, the maximum target dose has been reduced substantially to 110.4%. The maximum target dose was reduced by 21.6% using this technique. Conclusion: The results showed that controlled water bolus could significantly improve the dose homogeneity in the PTV for patients treated with electron therapy using water control device. This technique may reduce the incidence of normal organ complications that occur after electron-beam therapy in irregular surface. And our new device shows handiness of water control.