• 제목/요약/키워드: Case Addition

검색결과 9,175건 처리시간 0.037초

Effect of Growth Regulators on Organogenesis in Diploid and Tetraploid Codonopsis Ianceolata In Vitro Culture

  • Soo-Jeong Kwon;Young-Ho Choi;Hee-Ock Boo;Sun-Hee Woo;Hag-Hyun Kim
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.161-161
    • /
    • 2022
  • This study aimed to investigate the effect of growth regulators on the formation of the organ in the in vitro propagation of diploid and tetraploid Codonopsis lanceolata, and gain the basic data for in vitro propagation of superior C. lanceolata. In the case of diploid C. lanceolata, the highestshoot formation (3.0) was observed at 0.5 mg·L-1 addition medium with low IBA concentration. The shoot formation of tetraploid C. lanceolata was suppressed by addition of IBA. In the addition of lAA, the shoot formation of diploid C. lanceolata was slightly higher at 1.0 mg·-L-1 addition medium than that of control group, whereas tetraploid C. lanceolata showed the highest number (5.4) from control group. In the case of NAA, the shoot formation of diploid and tetra C. lanceolata tended to decrease at higher concentration. In terms of BA addition, the shoot formation of diploid C. lanceolata was increased by the addition of BA, whereaswhile the growth of shoot was decreased by the addition of BA. In the case of tetraploid C. lanceolata, shoot was found to be formed by the addition of low concentration of BA, and the growth of shoot was inhibited with the higher addition concentration of BA. With the addition of kinetin, the shoot formation of diploid C. lanceolata was slightly higher than that of control group, and the formation of adventitious root was highest (5.3) in the control group. In the case of tetraploid C. lanceolata, the shoot formation was similar in all treatment groups, but the formation and growth of adventitious root were significantly lower than that of diploid C. lanceolata. In the case of TDZ addition, the shoot formation of diploid C. lanceolata showed the pronounced results at 5.0 mg·L-1 addition medium, and the growth of shoot was inhibited by the addition of TDZ. The formation of adventitious root was 5.3 and 4.9 in the control group and 0.1 mg·L-1 addition medium respectively. The formation of the shoot of tetraploid C. lanceolata showed better results with the higher concentration of TDZ, and the growth was better with the lower concentration of TDZ. The formation and growth of adventitious root were significantly slower than that of diploid C. lanceolata.

  • PDF

간장 발효에 관여하는 효모에 관한 연구 (제5보) -Saccharomyces rouxii T-9의 영양요구성(1) 질소원 및 무기염류의 영향에 대하여- (Studies on the Yeasts for the Brewing of Soy sauce(5) -Nutritional requirements of Saccharomyces rouxii T-9 (1) Influence of addition of nitrogen sources and inorganic salts-)

  • 이택수;이석건
    • Applied Biological Chemistry
    • /
    • 제14권1호
    • /
    • pp.99-102
    • /
    • 1971
  • Saccharomyces rouxii $T_9$의 생육에 있어서 질소원 및 무기염류의 영향을 실험한 결과는 아래와 같다. (1) 무염배지의 경우 유기질소원으로서는 peptone을 $2.5{\sim}5.0%$ 첨가했을때 균의 생육이 가장 양호하였으며 무기질소원으로서는 $(NH_4)_2HPO_4$를 1.0% 첨가했을때 가장 양호하였다. (2) 20% 식염함유배지의 경우 유기질소원으로서는 yeast ext.를 1.5% 첨가했을때 가장 양호하였으며 무기질소원으로서는 urea를 5% 첨가 했을매 가장 양호하였다. (3) 무기염류로서 $NaNO_3$는 무염배지의 경우 1% 첨가했을때 가장 양호하였으나 20% 또 식염함유배지의 경우에는 26% 첨가했을 때보다 5%첨가했을때 더욱 양호 하였다. (4) $MgSO_4$$CaCl_2$는 0.5% 첨가한 경우 무염배지에서 보다도 20% 식염함유 배지에서 더욱 효과가 있었으며 $MgCl_2$는 26% 식염함유배지에 1%첨가 했을때 가장 효과가 있었다.

  • PDF

취약계층 재가노인의 사례관리 성과와 영향요인에 관한 구조모형 구축 (Structural Equation Modeling on Case Management Outcomes and Factors Influencing Outcomes in the Community-dwelling Vulnerable Elders)

  • 문현정;이인숙
    • 대한간호학회지
    • /
    • 제43권6호
    • /
    • pp.791-800
    • /
    • 2013
  • Purpose: This study was done to test a structural equation modeling of case management outcomes in order to identify parameters affecting case management outcomes for the community-dwelling vulnerable elders. Methods: Data were collected from 309 nurses (case managers) and community-dwelling vulnerable elders (clients) from public health centers. For data analysis, descriptive statistics, Pearson correlation analysis, factor analysis, and covariance structure analysis were performed using SPSS Version 18.0 for Windows and Amos 16.0. Results: The hypothetical model had an acceptable fit: GFI=.97, CFI=.95, RMSEA=.02, SRMR=.05. The factor "case managers' singularity" had the greatest impact on case management outcomes in this model. In addition, the factor "case management practice" influenced case management outcomes; however, client characteristics did not. Case managers' singularity affected case management outcomes directly and indirectly, with case management practice mediating the latter effect. Conclusion: These results suggest that the causal relationship between case management outcomes and factors influencing these outcomes should be clarified through longitudinal research including a variety of client characteristics. In addition, in future studies, analysis of the effects of programs to improve manpower quality and examine the relationships among case management outcomes should be done.

전자 부품상의 금도금에 관한 연구 (제 2 보) (Gold Alloy Plating on Electronic Parts(II))

  • 염희택
    • 한국표면공학회지
    • /
    • 제9권3호
    • /
    • pp.1-4
    • /
    • 1976
  • In order to get high wear-resistant gold alloy plating on electronic parts, on attempt has been made, in which Cu, Ni, and Zn EDTA salts were added in gold palting solution. The results obtained on the wear resistance are as follows: 1. The addition of 0.5g/ι or over Cu in plating solution, showed 1.5 times more wear resistance than in case of no addition. 2. The addition of 1.5g/ι or over Ni, showed 3.5 times more wear-resistance . 3. The addition of 1.5g/ι and 4.0g/ι Zn , showed 3.5 times and 6.8 times more wear resistance , respectively. 4. The addition of 1.5g/ι Ni and 1.0g/ι Zn simultaneously , showed about 10 times more wear resistance than in case of no addition.

  • PDF

TiAl 금속간화헙물의 공식거동에 미치는 합금원소의 영향 (Effects of Alloying Elements on the Pitting Behavior of Ti-Al Intermetallic Compounds)

  • 이호종;최한철
    • 한국표면공학회지
    • /
    • 제31권3호
    • /
    • pp.157-164
    • /
    • 1998
  • Effects of alloying elements on the pitting behavior of Ti-Al intermetalic compounds in the electrolytic soution containing Cl- were investigated through electrochemical tets and corrosion morphologies. Corrosion potential increased in the case of Cr addition to Ti-48%Al, whereas it decreased in the case of Si and B addition. The simultaneous addition of Cr and Si increased passive current density and decrosion corrosion potential. The passive current density of N addtion was higher than that of B addition in H2SO4 solution. With the addition of alloying elements, The pitting resistance decreased in order of TiAl>TiAlSi>TiAlN>TiAlB>TiAlCr and whin siumultaneous addition, it decreased in order of TiAlCrSi>TiAlCrBN>TiAlCrrN. The surface merohology after pitting test showed that the TiAl coataining Si had for fewer pits than that containing Cr and N simultaneously.

  • PDF

직접분사 성층연소방식에서 수소 첨가에 의한 미연 탄화수소의 저감 (The Reduction of Unburned Hydrocarbons on the Direct-Injection Stratified-Charge Combustion Method by Hydrogen Addition)

  • 홍명석;김경석
    • 한국자동차공학회논문집
    • /
    • 제4권4호
    • /
    • pp.46-57
    • /
    • 1996
  • The direct injection stratified charge(DISC) engine enhances the fuel tolerance and the antiknock tendency. This enhanc3d antiknock tendency allows use of a higher compression ratio which results in higher thermal efficiency. But its actual utilization is prevented by high emission combustion time and wall quenching will be the main causes of increasing unburned hydrocarbons in DISC system. In order to solve this problem, small aount of hydrogen was added to the charging air or injected fuel. The effects of hydrogen addition were examined experimentally by radial fuel injection using a pancake-type constant volume bomb. In case of the hydrogen addition to the charge of air, the combustion the amount of hydrogen. In case of the hydrogen addition to the fuel, the combustion pressure was significantly increased.

  • PDF

Case-Related News Filtering via Topic-Enhanced Positive-Unlabeled Learning

  • Wang, Guanwen;Yu, Zhengtao;Xian, Yantuan;Zhang, Yu
    • Journal of Information Processing Systems
    • /
    • 제17권6호
    • /
    • pp.1057-1070
    • /
    • 2021
  • Case-related news filtering is crucial in legal text mining and divides news into case-related and case-unrelated categories. Because case-related news originates from various fields and has different writing styles, it is difficult to establish complete filtering rules or keywords for data collection. In addition, the labeled corpus for case-related news is sparse; therefore, to train a high-performance classification model, it is necessary to annotate the corpus. To address this challenge, we propose topic-enhanced positive-unlabeled learning, which selects positive and negative samples guided by topics. Specifically, a topic model based on a variational autoencoder (VAE) is trained to extract topics from unlabeled samples. By using these topics in the iterative process of positive-unlabeled (PU) learning, the accuracy of identifying case-related news can be improved. From the experimental results, it can be observed that the F1 value of our method on the test set is 1.8% higher than that of the PU learning baseline model. In addition, our method is more robust with low initial samples and high iterations, and compared with advanced PU learning baselines such as nnPU and I-PU, we obtain a 1.1% higher F1 value, which indicates that our method can effectively identify case-related news.

3% NaCl용액중에 있어서 4340강의 부식거동과 과방식에 의한 수소포화거동에 미치는 인히비타의 영향 (The effect of inhibitors affecting to corrosion behaviors and hydrogen embrittlement behaviors due to over-propection of a 4340 steel in 3% NaCl solution)

  • 문경만;백태실;이상태
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제13권4호
    • /
    • pp.54-62
    • /
    • 1989
  • When some kinds of inhibitors, i.e. $1{\times}10{-3}mol/l$ arsenic trioxide, 0.2 mol/l 2-mercaptoethanol, 0.2mol/l thiourea were added to 3% NaCl solution, there were some considererable effects to decrease corrosion current density in natural potential condition and the effect fo solution temperature increasing corrosion rate was smaller than that of no addition to 3% NaCl solution. However the susceptibility of hydrogen embrittlement due to over-protection in case of cathodic protection was much greater than that of no addition, especially was the greatest in case of addition of 2-mercaptoethanol. Therefore adding inhibitors for anti-corrosion effect, it is suggested that selection of the optimum protection potential is important from the view point of prevention against hydrogen embrittlement due to over-protection in case of cathodic protection.

  • PDF

플라즈마 용사에 의한 BSCCO 초전도체 형성을 위한 용사 분말의 제조에 관한 연구 (A Study on Manufacture of Spraying Powder for BSCCO Superconductor Formation by Plasma Spray)

  • 박정식;조창은;박경채
    • 한국분말재료학회지
    • /
    • 제15권6호
    • /
    • pp.477-481
    • /
    • 2008
  • Formation and characteristics of spraying powder for BSCCO High-Tc superconductor prepared by plasma spray coating were investigated. The addition of 3% of binder gives the best flowability of the powder. Ball milling for 30h and 35h gives the best flowability of powder in the case of 2001 and 0212, respectively. The withdraw ratio increases upon binder addition from 12 to 27% in the case of 2001 and from 18 to 31% in the case of 0212 for sieving powder of $30-90{\mu}m$ in size. The built-up efficiency for $100{\mu}m$ thickness of spray coating is increased more than 30% by binder addition. The microstructure of the spray coated layers was investigated by XRD and EDS analysis.

Arranged Stories Reflecting the Thinking of Students in Engineering Ethics Case Study Method

  • Yasui, Mitsukuni
    • 공학교육연구
    • /
    • 제17권5호
    • /
    • pp.28-32
    • /
    • 2014
  • Engineering Ethics is a fundamental and essential subject and the understanding of ethics is of great importance for students in engineering courses and professional engineers. Most courses would consist of ethical tests, decision making opportunities, case studies, case methods, and group discussion. It is important to consider each case carefully, so we offer a number of hypothetical short stories to students as case methods that they cover in detail. We check the behavior decisions of students as they read the hypothetical short stories. In this study, the short story was about 200 words in length. This paper shows how, with the addition of minor changes to the text, some students changed their behavioral decisions. For example, with the addition of "if you take financial liability for the losses," some thought that they would not want to carry the debt. Other cases showed how some students disliked the majority rule. The paper shows that this arranged hypothetical short story method can often guide student's decision-making process, and can result in decreased undesirable decisions.