• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.5-16
• /
• 2007

The stone column method is widely used in Europe as an alternative to conventional pile foundations. Several benefits of using the stone column method include sound performance, low cost, expediency of construction, and liquefaction resistance among others. Recently, geosynthetic-encased stone column approach has been developed to improve its load carrying capacity through increasing confinement effect. Although such a concept has been successfully applied in practice, fundamentals of the method have not been fully explored. This paper presents the results of an investigation on the load carrying capacity of geogrid-encased stone column using a series of 2D finite element analyses. A parametric study was then conducted for influencing factors such as effect of geogrid encasement, encasement length, geogrid strength, among others. The results of the analyses indicated improved short- and long-term load carrying capacity of the geogrid-encased stone column method has advantages over the conventional stone column method without encasing.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.1
• /
• pp.67-77
• /
• 2017

In the present study, uplift load carrying behavior of micropiles with installation angle and pile spacing was investigated based on uplift load tests using single and group micropiles. In addition, evaluation methods of uplift load carrying capacity of group micropiles were proposed based on FHWA (2005) and Madhav (1987) and they were compared with test results to confirm the validity of proposed methods. From the test results, uplift load carrying capacities of single and group micropiles increased with the increase of the installation angle up to $30^{\circ}$, whose values also increased slightly with increasing pile spacing. For the proposed method based on FHWA (2005), the estimated values were similar to measured values up to $15^{\circ}$ of installation angle and 5D of pile spacing. For the proposed method based on Madhav (1987), on the other hand, it was observed that the estimated values were in good agreement with measured values in all installation conditions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.89-96
• /
• 2018

Bridge structures are a socially important infrastructure and safety management of bridges during the public service period is important. Steel box girder bridges, which account for a large percentage of road bridges, have been designed by allowable stress design method(ASD) and load carrying capacity have been evaluated using ASD. Although design specification has recently been changed to limit state design method(LSD), in most cases, ASD is still used for load carrying capacity evaluation. In this study, the two design methods were used to compare the results of a load rating factor evaluation on a number of bridges, and we are going to find out how to convert the existing rating factor by ASD into rating factor by LSD. The results of this study are expected to can be used as a basis for determining the need for reinforcement and evaluating load carrying capacity by LSD in bridge maintenance.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.16 no.2
• /
• pp.77-84
• /
• 1980

The nonstationary vibration of a rotor carrying two discs with a limited driving torque is studied theoretically by using the method of the perturbation theory. The influence of the asymmetry, torque, damping and phase difference in passing through a critical speed is studied in detail, considering the interaction between the driving source and the vibration system.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.4 s.56
• /
• pp.159-169
• /
• 2009

In this study, static loading tests and numerical analyses of the composite beam strengthened by multi-stepwise thermal prestressing method were carried out to evaluate the prestressing effect of the thermal prestressing prestress and the sectional effect of the installed cover-plate on the increase in the load-carrying capacity of composit beam. From this study, the strengthening method using multi-stepwise thermal prestressing method (TPSM) can be applied to reduce the deflection of the composite beam as well as to strengthening the composite beam by inducing the prestress in case of the occurrence in the large deflection by the insufficiency of the section properties of the composite beam. because of the expectation of the increase in the yield load and the sectional properties of the composite beam.

• Ocean and Polar Research
• /
• v.42 no.1
• /
• pp.21-31
• /
• 2020

Shorebirds migrating along the East Asian-Australasian Flyway (EAAF) have been drastically decreasing due to continuous area loss and quality degradation of intertidal mudflats in the Yellow Sea. Evaluating the current habitat quality by means of habitat carrying capacity estimation could be effective in predicting the magnitude of impacts caused by habitat loss and provide better understanding to improve management strategies. In this study, we estimated the total biomass of Macrophthalmus japonicus, a main prey item of curlews in the Korea peninsular as habitat carrying capacity of the southern intertidal mudflat of Ganghwa Island, one of the key stopover sites for curlews in the EAAF. The result of the estimation took into account spatial differences of prey biomass and the available foraging time by tide patterns. Accordingly, it was found that curlew populations account for 30.26% of the habitat carrying capacity. When we calculated the mean biomass of the area and extrapolated it to the whole area to calculate the total biomass, it was found that the curlews have consumed 10.92% of the total biomass. The results show that the habitat carrying capacity of the southern intertidal mudflat of Ganghwa Island has decreased by 7.8% compared to a study conducted twenty years ago employing the same method. This study shows that there can be considerable differences in the results of habitat carrying capacity estimation between different methods, indicating that various environmental factors that affect the estimation results of habitat carrying capacity must be considered to achieve a more precise analysis and assessment.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.6
• /
• pp.741-747
• /
• 2012

Objective: The purpose of this study is to compare the EMG activities of the trunk muscles when carrying a backpack with belts and without belts. Background: This research aimed to explore the influence of carrying a backpack with belts on the trunk muscles activity and to suggest a desirable method of wearing backpacks. Method: Seventy five adolescents participated in this study. The EMG activities of upper trapezious, cervical erector spinae and rectus abdominis were collected. One way ANOVA was used to analyze the collected data. LSD was used for post-hoc test. Results: The EMG data from treadmill walking showed significant differences between carrying a backpack with belts and without belts for the cervical erector spinae and upper trapezious(p<.05) in all group(A Group: no belt, B Group: lumbar belt, C Group: lumbar-chest belt). In descending walking, significant difference were found for the cervical erector spinae and rectus abdominis in all group. In ascending walking, there were no significant differences in all group. LSD showed that the muscle activity of the trunk muscles decreased significantly when the lumbar belt and lumbar-chest belt were worn. Conclusion: The trunk muscles activities were decreased when the subjects were wearing a backpack with belts, comparing with wearing a backpack without belts. Application: These results can be used to provide useful information on how wearing a backpack in adolescent.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.4
• /
• pp.53-60
• /
• 2019

In this study, a method for updating the finite element model of bridges with genetic algorithm using static displacement were presented, and verified this method using field test data for PSC girder bridge. As a field test, static load test and pseudo-static load test were conducted, and updated the finite element model of test bridge using each test data. Finally, evaluated the bridge load carrying capacity with updated model using pseudo-static load test's displacement data. To evaluate the bridge load carrying capacity, KHBDC-LSD, KHBDC and AASHTO LRFD's live load model were used, and compared the each results.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1024-1030
• /
• 2007

We studied on the characteristics of many kinds of tank cars carrying hazard materials and performed structural strength evaluation for tank of asphalt tank car using finite element analysis. We analyzed the tank strength according to JIS E 7102(Design Method for Tanks of Tank Cars). It was found that the maximum stress obtained at the area supported by the saddle is much lower than the yield stress and the criteria of JIS E 7102.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.187-192
• /
• 2003

Nowadays, It has adapted both Ultimate Strength Design(USD) and Allowable Stress Design(ASD) Method evaluating load-carrying capacity of PSC I Type Girder Bridge. But it has confused because the each method has brought some different results. This study shows some results of loading test of the PSC I type Girder Bridge and analyzed the structural behavior by FEM analysis considering material nonlinear. Parametric study of effective prestress of post tendon is performed and compared to results of loading test.