• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.331-343
• /
• 2002

Because of the increasing span of arch bridges, ultimate capacity analysis recently becomes more focused both on design and construction. This paper investigates the static and ultimate behavior of a long-span steel arch bridge up to failure and evaluates the overall safety of the bridge. The example bridge is a long-span steel arch bridge with a 550 m-long central span under construction in Shanghai, China. This will be the longest central span of any arch bridge in the world. Ultimate behavior of the example bridge is investigated using three methods. Comparisons of the accuracy and reliability of the three methods are given. The effects of material nonlinearity of individual bridge element and distribution pattern of live load and initial lateral deflection of main arch ribs as well as yield stresses of material and changes of temperature on the ultimate load-carrying capacity of the bridge have been studied. The results show that the distribution pattern of live load and yield stresses of material have important effects on bridge behavior. The critical load analyses based on the linear buckling method and geometrically nonlinear buckling method considerably overestimate the load-carrying capacity of the bridge. The ultimate load-carrying capacity analysis and overall safety evaluation of a long-span steel arch bridge should be based on the geometrically and materially nonlinear buckling method. Finally, the in-plane failure mechanism of long-span steel arch bridges is explained by tracing the spread of plastic zones.

• Structural Engineering and Mechanics
• /
• 제46권1호
• /
• pp.39-51
• /
• 2013

An extremum method is presented to predict the wrinkling characteristics of the inflated cone in bending. The wrinkling factor is firstly defined so as to obtain the wrinkling condition. The initial wrinkling location is then determined by searching the maximum of the wrinkling factor. The critical wrinkling load is finally obtained by determining the ratio of the wrinkling moment versus the initial wrinkling location. The extremum method is proposed based on the assumption of membrane material of beam wall, and it is extended to consider beam wall with thin-shell material in the end. The nondimensional analyses show that the initial wrinkling location is closely related to the taper ratio. When the taper ratio is higher than the critical value, the initial wrinkles will be initiated at a different location. The nondimensional critical wrinkling load nonlinearly increases as the taper ratio increases firstly, and then linearly increases after the critical taper ratio. The critical taper ratio reflects the highest load-carrying efficiency of the inflated cone in bending, and it can be regarded as a measure to optimize the geometry of the inflated cone. The comparative analysis shows fairly good agreement between analytical and numerical results. Over the whole range of the comparison, the mean differences are lower than 3%. This gives confidence to use extremum method for bending-wrinkling analysis of inflated conical cantilever beam.

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.381-388
• /
• 2018

Dynamic behaviour of beam carrying masses has attracted attention of many researchers and engineers. Many studies on the analytical solution of beam with concentric tip mass have been published. However, there are limited works on vibration analysis of beam with an eccentric three dimensional object. In this case, bending and torsional deformations of beam are coupled due to the boundary conditions. Analytical solution of equations of motion of the system is complicated and lengthy. Therefore, in this study, Differential Transform Method (DTM) is applied to solve the relevant equations. First, the Timoshenko beam with 3D tip attachment whose centre of gravity is not coincident with beam end point is considered. The beam is assumed to undergo bending in two orthogonal planes and torsional deformation about beam axis. Using Hamilton's principle the equations of motion of the system along with the possible boundary conditions are derived. Later DTM is applied to obtain natural frequencies and mode shapes of the system. According to the relevant literature DTM has not been applied to such a system so far. Moreover, the problem is modelled by Ansys, the well-known finite element method, and impact test is applied to extract experimental modal data. Comparing DTM results with finite element and experimental results it is concluded that the proposed approach produces accurate results.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.26-33
• /
• 2014

In this study, Non-load-carrying EH Grade steels in fillet welded joints were evaluated with both the hot spot stress method and the 1mm stress method. The thickness effect criterion for fatigue strength evaluation of welded of welded steel structures recommendations of the IIW was used to evaluate the fatigue strength of EH40 and EH36 and Both EH40 and EH36 have been compared with FAT 125 curve recommended in the IIW. Furthermore, fatigue strength of the welded tow and the ground conditions for Non-load-carrying EH36 based on the 1mm stress method has been discussed.

• 콘크리트학회논문집
• /
• 제19권6호
• /
• pp.755-762
• /
• 2007

노후된 PSC I 거더교에 대한 내하력 평가 방법과 외부 강선으로 보강된 교량의 성능 평가 및 보강 효과 검증 방법은 재하 차량을 이용한 현장 실험이 많이 사용된다. 하지만 재하 차량에 의한 실험은 탄성 범위 내의 사용하중 상태에서 이루어지므로 활하중에 의한 교량의 거동 특성 분석만 유효하며, 균열하중 이후에 나타나는 비선형 거동과 극한 상태에서의 내하력을 평가하는 것은 불가능하다. 이 실험 연구에서는 27년 동안 공용된 PSC I 거더교를 대상으로 여러 가지 재하 시험을 실시하여 사용하중 및 극한하중에 대한 교량의 거동 특성과 내하 능력을 분석하였다 또한 외부 강선 보강 방법의 보강 효과를 검증하기 위하여 기존 교량의 내부 PS 강선을 절단하여 인위적으로 손실을 유도하고 평가하였으며, 절단된 양 만큼을 외부 강선으로 보강하여 보강 전후의 거동 변화를 비교하였다. 이 실험 결과를 이용하면 PSC I 거더교에 외부 강선 보강 방법을 적용할 경우에 요구되는 기존 교량의 내하력, 요구 보강량, 보강 공사시 품질관리 기준 등을 보다 명확하게 결정할 수 있을 것이다.

• Structural Engineering and Mechanics
• /
• 제48권1호
• /
• pp.57-75
• /
• 2013

It is still inadequate for investigating the highly nonlinear and complex mechanical behaviors of single-layer latticed domes by only performing a force-based demand-capacity analysis. The energy-based balance method has been largely accepted for assessing the seismic performance of a structure in recent years. The various factors, such as span-to-rise ratio, joint rigidity and damping model, have a remarkable effect on the load-carrying capacity of a single-layer latticed dome. Therefore, it is necessary to determine the maximum load-carrying capacity of a dome under extreme loading conditions. In this paper, a mechanical model for members of the semi-rigidly jointed single-layer latticed domes, which combines fiber section model with semi-rigid connections, is proposed. The static load-carrying capacity and seismic performance on the single-layer latticed domes are evaluated by means of the mechanical model. In these analyses, different geometric parameters, joint rigidities and roof loads are discussed. The buckling behaviors of members and damage distribution of the structure are presented in detail. The sensitivity of dynamic demand parameters of the structures subjected to strong earthquakes to the damping is analyzed. The results are helpful to have a better understanding of the seismic performance of the single-layer latticed domes.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권6호
• /
• pp.3861-3864
• /
• 2013

Glutathione S-transferase (GST) enzyme levels are associated with risk of many cancers, including hematologic tumours. We here aimed to investigate the relationships between GSTM1, GSTT1 and GSTP1 polymorphisms and the risk of AML. Genotyping of GSTs was based upon duplex polymerase-chain-reactions with the confronting-two-pair primer (PCR-CTPP) method in 163 cases and 204 controls. Individuals carrying null GSTT1 genotype had a 1.64 fold risk of acute leukemia relative to a non-null genotype (P<0.05). A heavy risk was observed in those carrying combination of null genotypes of GSTM1 and GSTT1 and GSTP1 Val allele genotypes when compared with those carrying wild genotypes, with an OR (95% CI) of 3.39 (1.26-9.26) (P<0.05). These findings indicate that genetic variants of GST and especially the GSTT1 gene have a critical function in the development of AML. Our study offers important insights into the molecular etiology of AML.

• Steel and Composite Structures
• /
• 제17권4호
• /
• pp.431-452
• /
• 2014

The present study focuses on the mechanical behaviour of concrete filled double skin steel tubular (CFDST) stub columns confined by fiber reinforced polymer (FRP). A series of axial compression tests have been conducted on two CFDST stub columns, eight CFDST stub columns confined by FRP and a concrete-filled steel tubular (CFST) stub column confined by FRP, respectively. The influences of hollow section ratio, FRP wall thickness and fibre longitudinal-circumferential proportion on the load-strain curve and the concrete stress-strain curve for stub columns with annular section were discussed. The test results displayed that the FRP jacket can obviously enhance the carrying capacity of stub columns. Based on the test results, a new model which includes the effects of confinement factor, hollow section ratio and lateral confining pressure of the outer steel tube was proposed to calculate the compressive strength of confined concrete. Using the present concrete strength model, the formula to predict the carrying capacity of CFDST stub columns confined by FRP was derived. The theoretically predicted results agree well with those obtained from the experiments and FE analysis. The present method is also adapted to calculate the carrying capacity of CFST stub columns confined by FRP.

• Earthquakes and Structures
• /
• 제12권1호
• /
• pp.23-34
• /
• 2017

Composite steel plate deep beam (CDB) is proposed as a lateral resisting member, which is constructed by steel plate and reinforced concrete (RC) panel, and it is connected with building frame through high-strength bolts. To investigate the seismic performance of the CDB, tests of two 1/3 scaled specimens with different length-to-height ratio were carried out under cyclic loads. The failure modes, load-carrying capacity, hysteretic behavior, ductility and energy dissipation were obtained and analyzed. In addition, the nonlinear finite element (FE) models of the specimens were established and verified by the test results. Besides, parametric analyses were performed to study the effect of length-to-height ratio, height-to-thickness ratio, material type and arrangement of RC panel. The experimental and numerical results showed that: the CDBs lost their load-carrying capacity because of the large out-of plane deformation and yield of the tension field formed on the steel plate. By increasing the length-to-height ratio of steel plate, the load-carrying capacity, elastic stiffness, ductility and energy dissipation capacity of the specimens were significantly enhanced. The ultimate loading capacity increased with increasing the length-to-height ratio of steel plate and yield strength of steel plate; and such capacity increased with decreasing of height-to-thickness ratio of steel plate and gap. Finally, a unified formula is proposed to calculate their ultimate loading capacity, and fitting formula on such indexes are provided for designation of the CDB.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권1호
• /
• pp.355-358
• /
• 2013

XRCC1 genetic polymorphisms could be associated with increased risk of various cancer, including hepatocellular carcinoma (HCC), the fifth most common cancer. We here conducted a study to explore the role of selective SNPs of the XRCC1 and XPD genes in the prognosis of HCC. A total of 231 cases were collected, and genotyping of XRCC1 Arg194Trp, XRCC1 Arg399Gln, XPD Lys751Gln and XPD Asp312Asn was performed by duplex polymerase-chain-reaction with the confronting-two-pair primer method. Our findings indicated XRCC1 399Gln/Gln genotype was associated with a significant difference in the median survival time compared with patients carrying Arg/Trp and Arg/Arg genotypes, and individuals with XPD 751 Gln/ Gln genotype had a significantly greater survival time than patients carrying Lys/Lys and Lys/Gln genotypes. The Cox's regression analysis showed individuals carrying XRCC1 399Trp/Trp genotype had 0.55 fold risk of death from HCC than Arg/Arg genotype. Similarly, XPD 751Gln/Gln had a strong decreasein comparison to XPD Lys/Lys carriers with an HR of 0.34. These results suggest that polymorphisms in XRCC1 and XPD may have functional significance in the prognosis of HCC.