• Journal of Environmental Impact Assessment
• /
• v.11 no.1
• /
• pp.25-36
• /
• 2002

The purpose of this study is to assess the environmental carrying capacity of Chongju City for the environmental management and the urban growth management. The urban environmental carrying capacity assessment of the city by the index of ecological footprint(EF), shows that the ecosystem of the city has been overloaded and most of the deficiencies has come from outside of the city. The EF index, the area of land per capita required for production and consumption in the city, was 1.731 ha per capita in 1989 and 1.901 ha per capita in 1999. On the other side, the ecologically productive land is 0.0175 ha per capita. It means that every citizen owes 1.88 ha per capita to the ecosystem in 1999. The land consumption of the city has increased by 0.1705 ha per capita during the last 10 years. The capacity of infrastructure and the service supply estimated by the Onishi model does not exceed the demand of the city in 1999. But the rapidly increasing population and fast urban growth need the expansion of the capacity. The water supply capacity of the city appears to be sufficient in 1999, but the water supply demand will increase in the future. The capacity of sewage treatment facilities seems to be sufficient, but the higher level of sewage treatment facilities should be adopted for the improvement of water quality as the generation of sewage will increase and its characteristics will also make the wastewater treatment difficult. Due to the decrease of solid waste generated, the land fill capacity for solid waste disposal is not insufficient at present, but the capacity will be saturated in the near future. Therefore, the scientific management system of solid wastes should be introduced. The air quality of the city meets both the national air quality standard and WHO recommendation standard, but the strong regulation and control of automobile emission gas such as CO, $CO_2$, NOx and HC is required for clean air.

• Journal of the Korean Mathematical Society
• /
• v.58 no.5
• /
• pp.1227-1237
• /
• 2021

This paper is concerned with a reaction-diffusion logistic model. In [17], Lou observed that a heterogeneous environment with diffusion makes the total biomass greater than the total carrying capacity. Regarding the ratio of biomass to carrying capacity, Ni [10] raised a conjecture that the ratio has a upper bound depending only on the spatial dimension. For the one-dimensional case, Bai, He, and Li [1] proved that the optimal upper bound is 3. Recently, Inoue and Kuto [13] showed that the supremum of the ratio is infinity when the domain is a multi-dimensional ball. In this paper, we generalized the result of [13] to an arbitrary smooth bounded domain in ℝⁿ, n ≥ 2. We use the sub-solution and super-solution method. The idea of the proof is essentially the same as the proof of [13] but we have improved the construction of sub-solutions. This is the complete answer to the conjecture of Ni.

• Structural Engineering and Mechanics
• /
• v.82 no.1
• /
• pp.81-92
• /
• 2022

Ultra-high performance fiber reinforced concrete (UHPFRC) is a composite building material with high ductility, fatigue resistance, fracture toughness, durability, and energy absorption capacity. The aim of this study is to develop a nonlinear finite element model that can simulate the response of the UHPFRC beam exposed to impact loads. A nonlinear finite element model was developed in ABAQUS to simulate the real response of UHPFRC beams. The numerical results showed that the model was highly successful to capture the experimental results of selected beams from the literature. A parametric study was carried out to investigate the effects of reinforcement ratio and impact velocity on the response of the UHPFRC beam in terms of midpoint displacement, impact load value, and residual load-carrying capacity. In the parametric study, the nonlinear analysis was performed in two steps for 12 different finite element models. In the first step, dynamic analysis was performed to monitor the response of the UHPFRC beam under impact loads. In the second step, static analysis was conducted to determine the residual load-carrying capacity of the beams. The parametric study has shown that the reinforcement ratio and the impact velocity affect maximum and residual displacement value substantially.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.386-394
• /
• 2002

Carrying capacity model focused on interactions between the filter-feeder growth and their environments is presented, and differences among existing various carrying capacity models are reviewed. For carrying capacity modeling of shellfish system, we constructed a new numerical model coupled oyster growth model with an ecosystem model (EUTRP2). Physical and biological processes such as water transport and mixing, primary production, feeding and growth of the cultivated oyster, Crassostrea gigas and benthic-pelagic exchange were included in the model, Simulated results for validation showed that the more phytoplankton biomass decreased, the more oyster meat weight and nutrients increased, suggesting a powerful tool for reasonable management of shellfish aquaculture. The model was sensitive to parameters controlling the primary production. Among the ecosystem compartments, the oyster growth is highly influenced by small changes in the physiological parameters of phytoplankton and oyster. This sensitivity analysis indicated the importance of experimental data on biological parameters for calibration of the model.

• Geomechanics and Engineering
• /
• v.10 no.5
• /
• pp.599-615
• /
• 2016

The present research presents experimental and finite element studies to investigate the behavior of piled raft-tunnel system in a sandy soil. In the experimental work, a small scale model was tested in a sand box with load applied vertically to the raft through a hydraulic jack. Five configurations of piles were tested in the laboratory. The effects of pile length (L), number of piles in the group and the clearance distance between pile tip and top of tunnel surface (H) on the load carrying capacity of the piled raft-tunnel system are investigated. The load sharing percent between piles and rafts are included in the load-settlement presentation. The experimental work on piled raft-tunnel system yielded that all piles in the group carry the same fraction of load. The load carrying capacity of the piled raft-tunnel model was increased with increasing (L) for variable (H) distances and decreased with increasing (H) for constant pile lengths. The total load carrying capacity of the piled raft-tunnel model decreases with decreasing number of piles in the group. The total load carrying capacity of the piles relative to the total applied load (piles share) increases with increasing (L) and the number of piles in the group. The increase in (L/H) ratio for variable (H) distance and number of piles leads to an increase in piles share. ANSYS finite element program is used to model and analyze the piled raft-tunnel system. A three dimensional analysis with elastoplastic soil model is carried out. The obtained results revealed that the finite element method and the experimental modeling are rationally agreed.

• Structural Engineering and Mechanics
• /
• v.59 no.4
• /
• pp.703-718
• /
• 2016

Masonry arch bridges present a large segment of Iranian railway bridge stock. The ever increasing trend in traffic requires constant health monitoring of such structures to determine their load carrying capacity and life expectancy. In this respect, the performance of one of the oldest masonry arch bridges of Iranian railway network is assessed through field tests. Having a total of 11 sensors mounted on the bridge, dynamic tests are carried out on the bridge to study the response of bridge to test train, which is consist of two 6-axle locomotives and two 4-axle freight wagons. Finite element model of the bridge is developed and calibrated by comparing experimental and analytical mid-span deflection, and verified by comparing experimental and analytical natural frequencies. Analytical model is then used to assess the possibility of increasing the allowable axle load of the bridge to 25 tons. Fatigue life expectancy of the bridge is also assessed in permissible limit state. Results of F.E. model suggest an adequacy factor of 3.57 for an axle load of 25 tons. Remaining fatigue life of Veresk is also calculated and shown that a 0.2% decrease will be experienced, if the axle load is increased from 20 tons to 25 tons.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.1
• /
• pp.55-61
• /
• 2017

Recently several researches have been conducted to develop sliding track system in which friction between concrete track and bridge slab has been reduced. This paper investigated shear load carrying capacity of lateral supporting concrete block which should be implemented to resist lateral load due to train in sliding track system. In order to evaluate shear load carrying capacity of lateral supporting concrete block, analytical model has been developed considering concrete friction and rebar dowel action along construction joint. The proposed model predicted test results on the shear load carrying capacity from literature conservatively by 13~23% because effect of aggregate interlock along crack surface was neglected. Since construction joint status is ambiguous on construction site, it can be concluded that the proposed model can be used for reasonable design of lateral supporting concrete block. Based on the proposed model, design proposal for lateral supporting concrete block has been established.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.508-516
• /
• 2010

Hallasan National Park is facing dramatic increase of visitors since no entrance fee charge effected in January of 2007 and it has created a concern about appropriate use levels. The overall objective of this study is development of the carrying capacity indicators management program using indicator and standard based on visitor experience and resource protection (VERP) model. The result of delphi survey identified eight potential indicators of resource and experiential conditions, including quality of valley water, visitor counts, trail impacts, crowding etc. Also, Data were also gathered to help provide an empirical foundation for setting standards for these indicator variables. The carrying capacity indicators management program based on VERP model estimates sustainability of national park and analyze scientifically change about resources and visitor's behavior. Also, it systematically manage and use united data, it supports operation accomplishment respected rational decision.

• Earthquakes and Structures
• /
• v.17 no.2
• /
• pp.221-232
• /
• 2019

Material non-linearity of Reinforced Concrete (RC) framed structures is studied by modelling concrete using the Concrete Damage Plasticity (CDP) theory. The stress-strain data of concrete in compression is modelled using the Hsu model. The structures are analyzed using a finite element approach by modelling them in ABAQUS / CAE. Single bay single storey RC frames, designed according to Indian Standard (IS):456:2000 and IS:13920:2016 are considered for assessing their maximum load carrying capacity and failure behavior under the influence of gravity loads and lateral loads. It is found that the CDP model is effective in predicting the failure behaviors of RC frame structures. Under the influence of the lateral load, the structure designed according to IS:13920 had a higher load carrying capacity when compared with the structure designed according to IS:456. Ultra High Performance Fiber Reinforced Concrete (UHPFRC) strip is used for strengthening the columns and beam column joints of the RC frame individually against lateral loads. 10mm and 20mm thick strips are adopted for the numerical simulation of RC column and beam-column joint. Results obtained from the study indicated that UHPFRC with two different thickness strips acts as a very good strengthening material in increasing the load carrying capacity of columns and beam-column joint by more than 5%. UHPFRC also improved the performance of the RC frames against lateral loads with an increase of more than 3.5% with the two different strips adopted. 20 mm thick strip is found to be an ideal size to enhance the load carrying capacity of the columns and beam-column joints. Among the strengthening locations adopted in the study, column strengthening is found to be more efficient when compared with the beam column joint strengthening.

• Korean Journal of Environment and Ecology
• /
• v.15 no.3
• /
• pp.257-266
• /
• 2001

Trail might be the primary recreational space to appear the use impact by visitors on ecological space in National park. On the basis of this concept, the carrying capacity was estimated on the trail. Impact rating class and pattern of passersby were surveyed on the 22 valid trails in Bukhansan National Park. Using two variables, the width of trail and amount of passersby, the correlation coefficient was analysed and the regression model was derived by raising x to a higher power. And carrying capacity estimation equation was devised by considering the pay fee visitors and average passersby in a trail section. With carrying capacity estimation equation to apply Bukansan National Park, it is desired that maximum carrying capacity is about 3 million persons a year under conditions of trail width 2.2m when National Park Authority wants to keep the existing management level. If they strengthen the management goal far resource conservation like that they want to keep the trail width 2.0m, the number of visitors might be decreased to about 2 million persons a year.