• 제목/요약/키워드: Carrier-frequency

검색결과 1,233건 처리시간 0.027초

Effects of Simultaneous Bending and Heating on Characteristics of Flexible Organic Thin Film Transistors

  • Cho, S.W.;Kim, D.I.;Lee, N.E.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.470-470
    • /
    • 2013
  • Recently, active materials such as amorphous silicon (a-Si), poly crystalline silicon (poly-Si), transition metal oxide semiconductors (TMO), and organic semiconductors have been demonstrated for flexible electronics. In order to apply flexible devices on the polymer substrates, all layers should require the characteristic of flexibility as well as the low temperature process. Especially, pentacene thin film transistors (TFTs) have been investigated for probable use in low-cost, large-area, flexible electronic applications such as radio frequency identification (RFID) tags, smart cards, display backplane driver circuits, and sensors. Since pentacene TFTs were studied, their electrical characteristics with varying single variable such as strain, humidity, and temperature have been reported by various groups, which must preferentially be performed in the flexible electronics. For example, the channel mobility of pentacene organic TFTs mainly led to change in device performance under mechanical deformation. While some electrical characteristics like carrier mobility and concentration of organic TFTs were significantly changed at the different temperature. However, there is no study concerning multivariable. Devices actually worked in many different kinds of the environment such as thermal, light, mechanical bending, humidity and various gases. For commercialization, not fewer than two variables of mechanism analysis have to be investigated. Analyzing the phenomenon of shifted characteristics under the change of multivariable may be able to be the importance with developing improved dielectric and encapsulation layer materials. In this study, we have fabricated flexible pentacene TFTs on polymer substrates and observed electrical characteristics of pentacene TFTs exposed to tensile and compressive strains at the different values of temperature like room temperature (RT), 40, 50, $60^{\circ}C$. Effects of bending and heating on the device performance of pentacene TFT will be discussed in detail.

  • PDF

치과위생사의 유머에 관한 연구 (A Study on dental hygienist's humor)

  • 윤영숙
    • 한국치위생학회지
    • /
    • 제3권1호
    • /
    • pp.1-12
    • /
    • 2003
  • The purpose of this study was to verify the reliability of the instrument and to analyze the contents of the humor. This study was conducted from December 16th, 2002 to January 13th, 2003, centering on Busan Dental Hospital & public health service. A total of 193 questionnaires was distributed for the survey. The result were as followings: 1. There were significant differences in humor values concerning age(F=1l.44, p=0.000), marriage(t= -3.556, p=0.000), education(F=14.83, p=0.000), clinical carrier(F=9.99, p=0.000), status(F=5.83, p=0.001), working place(F=7.39, p=0.000), and living parents(F=3.65, p=0.014). Humor values were higher for over-forties, married dental hygienists, public health service worker and no living parents. 2. There were no Significant correlation between stress and the dental hygienist's humor values. 3. There were significant differences in humor values concerning sources of the dental hygienist's humor. Data related "book/mass media"(t=-6.32, p=0.000), "conversation" (t=-12.05, p=0.000) and "daily life"(t=-10.33, p=0.000) are examples of these sources. 4. There were no significant differences in humor values concerning the dental hygienist's humor degree related frequency of used humor. 5. There were significant differences in humor values concerning the type of humor used, "word humor"(t=-7.00, p=0.000), "imitation"(t=2.68, p=0.008), "adequate situation" (t=-8.03, p=0.000), "technical terms"(t=6.65, p=0.000) pertain to this. 6. There were Significant differences in humor values concerning the time of using humor expression, "loose situation"(t=-3.75, p=0.000), "tired situation"(t=4.01, p=0.000), "tense situation"(t=5.37, p=0.000), "adequate situation"(t=-16.03, p=0.000) pertain to this.

  • PDF

Marker gene의 직접삽입에 의한 transgenic plant의 제조 및 전기융합 (Electrofusion and preparation of transgenic plant by direct insert of marker gene)

  • 홍경애;류기중;소인섭;김양록;유장걸
    • Applied Biological Chemistry
    • /
    • 제36권6호
    • /
    • pp.562-566
    • /
    • 1993
  • 제라니움(Pelargonium zenale hybrids)의 원형질체에 외래유전자를 전기충격에 의해 직접도입시키는 조건을 methylene blue 염색법을 이용하여 조사하였다. 그 결과 1.77 kV/cm의 직류전압을 $40{\mu}\;sec$ 동안 가해 주는 것이 제일 효과적이었으며 이때의 원형질체 생존율은 70% 염색율은 58%이었다. 정제한 pBin19 plasmid를 전기충격법으로 원형질체에 삽입시킨 뒤 kanamycin이 포함된 배지에서 배양하였으며 원형질체의 세포분열은 KM8P 액체배지에서 제일 높았다. 윈형질체의 최적 전기융합 조건은 교류 주파수 1 MHz를 40 V/cm에서 15 sec 동안 가한 후 직류전압 0.5 kV/cm를 $60{\mu}\;sec$ 동안 처리해 준 결과 이때의 융합율과 생존율은 각각 13%, 81%이었다.

  • PDF

PAPR 저감기법을 적용한 DMB 시스템의 성능분석 (Performance Analysis on DMB System with PAPR Reduction Techniques)

  • 정영호;함영권;김환우
    • 방송공학회논문지
    • /
    • 제8권3호
    • /
    • pp.238-249
    • /
    • 2003
  • 국내 지상파 디지털멀티미디어방송(DMB)의 전송규격으로 OFDM 기반의 Eureka 147 DAB 시스템이 채택되었다 OFDM은 단일반송파 변조에 비해 많은 장점을 가지고 있으나, 높은 PAPR(Peak-to-Average Power Ratio)로 인해 A/D 및 D/A 변환기의 복잡도의 증가 및 고출력 증폭기의 효율 감소의 원인이 된다. 이와 같은 OFDM의 높은 PAPR을 감소시키기 위해 clipping, peak windowing, companding, SLM(Selected Mapping), PTS(Partial Transmit Sequences) 등과 같은 다양한 기법들이 제안되었다. 본 논문에서는 SLM과 PTS의 효율적인 구현방법을 제안하고, 이를 적용한 DMB 시스템의 PAPR 감소 성능에 대한 평가를 수행하였다 모의실험 결과, 제안된 MSLM(Modified SLM)은 SLM과 동일한 성능을 유지하면서 $P^{(U)}$벡터수의 감소로 인해 계산량 및 하드웨어 복잡도가 경감되는 이점이 있는 것으로 나타났으며, MPTS(Modified PTS) 또한 동일한 조건 하에서 PTS보다 우수한 PAPR 감소 성능을 보였다.

탄도미사일 탐지확률 향상을 위한 레이더 배치 방안 (Method on Radar deployment for Ballistic Missile Detection Probability Improvement)

  • 박태용;임재성
    • 한국정보통신학회논문지
    • /
    • 제20권3호
    • /
    • pp.669-676
    • /
    • 2016
  • 북한은 단거리 탄도미사일에서부터 대륙간 탄도미사일에 이르기 까지 다양한 탄도미사일을 보유하고 있다. 단거리 탄도미사일의 위협에 직접적으로 노출되어 있는 우리나라는 이러한 위협에 대응하기 위해 다양한 미사일방어체계를 구축 중이며, 레이더는 표적을 탐지하기 위한 핵심 장비이다. 표적으로부터 레이더로 수신되는 전력에 영향을 미치는 요소에는 레이더의 송신전력, 안테나 이득, 운용 주파수, 표적의 RCS(Radar Cross Section), 표적과의 거리등이 있으며, 특히 표적의 RCS와 레이더-표적 간 거리는 레이더 고유의 성능이 아닌 외적 요인에 의해 결정되는 요소이다. 따라서 레이더의 표적 탐지율 향상을 위해서는 표적의 RCS가 크게 관측되는 위치와 표적까지의 거리를 함께 고려하여야한다. 본 논문에서는 SCUD-B 탄도미사일을 기준으로 RCS 패턴을 분석하고, 미사일 비행경로와 레이더 위치에 따른 레이더 수신 전력을 분석함으로써 최적의 레이더 배치 방안을 제안하였다.

원거리 장애물이 VOR에 미치는 영향의 비행측정 및 분석 (Flight Measurement and Analysis of VOR Signal Influence from the Long Distance Surrounding Obstacles)

  • 박형택;황병원
    • 한국항행학회논문지
    • /
    • 제12권1호
    • /
    • pp.1-7
    • /
    • 2008
  • 전방향표지시설 (VOR : VHF Omni-directional Range)은 1949년 국제민간항공기구(ICAO)에서 국제 항공항법 표준시스템의 하나로 지정한 이후, 각국에서 항공로 구성과 항공기의 이착륙 정보제공에 널리 사용하고 있다. 현재 VOR은 우리나라의 39 대를 포함하여 전 세계적으로 2,000여대가 설치되어 있어 가장 유용하게 활용되고 있는 단거리 항공 항법시스템이나, VHF 반송파를 진폭 및 주파수변조하여 항법정보를 제공하기 때문에 산악지대 등 주변 장애물의 영향을 많이 받아 예상하지 못한 성능 미흡으로 이미 설치한 장비를 다시 옮기는데 따른 비용과 시간이 많이 허비되는 등 사회적인 문제를 야기하기도 한다. 이 논문에서는 원거리 장애물이 VOR의 성능에 어느 정도 영향을 미치는 지를 계측기 등을 장착한 항공기를 이용하여 10개 VOR의 24개 장애물에 대하여 측정 및 분석하고, 이를 VOR의 설치장소 결정에 활용할 수 있도록 하여 성능 미흡으로 설치된 장비를 이전하는 등의 문제점을 해소하는데 도움을 주고자 한다.

  • PDF

천해역에서의 실시간 수중 데이터 통신 시스템 구현 (The Implementation of a Real-time Underwater Acoustic Communication System at Shallow water)

  • 백혁;박종원;임용곤
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2007년도 춘계종합학술대회
    • /
    • pp.754-757
    • /
    • 2007
  • 본 논문은 시변하는 열악한 수중환경에서 복잡도를 줄이면서 강인한 수중 음향 데이터 통신 시스템의 구현내용과 천해역에서의 실해역 시험결과를 다루고 있다. 실해역 시험시의 복잡하고 시변하는 실험환경에 쉽게 적용할 수 있도록 수중음향센서와 증폭기를 제외한 모든 부분을 디지털화된 송신시스템과 수신 시스템으로 구현하였다. 프레임 동기방식으로 CAZAC 시퀀스가 사용되었고, 중심주파수 25kHz와 대역폭이 5kHz를 갖는 QPSK 변복조 방식이 사용되어 오버헤드를 포함하여 10kbps의 전송율을 가질 수 있도록 설계되었으며, 전송 효율을 향상시키기 위해서 적응 빔형성기, 적응 등화기, 컨볼루션/Viterbi 부호화기 등과 같은 여러 가지 기술이 사용되었다. 개발된 시스템의 성능검증을 위해서 거제도 장목연안의 수심 8m에서 실시간 데이터 통신 시험을 수행하였으며, 전송거리 7.4km에서 10kbps의 전송속도를 가지고 영상 데이터가 성공적으로 전송되었음을 확인하였다.

  • PDF

A Multi-Service MAC Protocol in a Multi-Channel CSMA/CA for IEEE 802.11 Networks

  • Ben-Othman, Jalel;Castel, Hind;Mokdad, Lynda
    • Journal of Communications and Networks
    • /
    • 제10권3호
    • /
    • pp.287-296
    • /
    • 2008
  • The IEEE 802.11 wireless standard uses the carrier sense multiple access with collision avoidance (CSMA/CA) as its MAC protocol (during the distributed coordination function period). This protocol is an adaptation of the CSMA/CD of the wired networks. CSMA/CA mechanism cannot guarantee quality of service (QoS) required by the application because orits random access method. In this study, we propose a new MAC protocol that considers different types of traffic (e.g., voice and data) and for each traffic type different priority levels are assigned. To improve the QoS of IEEE 802.11 MAC protocols over a multi-channel CSMA/CA, we have developed a new admission policy for both voice and data traffics. This protocol can be performed in direct sequence spread spectrum (DSSS) or frequency hopping spread spectrum (FHSS). For voice traffic we reserve a channel, while for data traffic the access is random using a CSMA/CA mechanism, and in this case a selective reject and push-out mechanism is added to meet the quality of service required by data traffic. To study the performance of the proposed protocol and to show the benefits of our design, a mathematical model is built based on Markov chains. The system could be represented by a Markov chain which is difficult to solve as the state-space is too large. This is due to the resource management and user mobility. Thus, we propose to build an aggregated Markov chain with a smaller state-space that allows performance measures to be computed easily. We have used stochastic comparisons of Markov chains to prove that the proposed access protocol (with selective reject and push-out mechanisms) gives less loss rates of high priority connections (data and voices) than the traditional one (without admission policy and selective reject and push-out mechanisms). We give numerical results to confirm mathematical proofs.

사파이어를 기판으로 이용하여 HVPE법으로 제작한 Freestanding GaN의 특성 (Properties of Freestanding GaN Prepared by HVPE Using a Sapphire as Substrate)

  • 이영주;김선태
    • 한국재료학회지
    • /
    • 제8권7호
    • /
    • pp.591-595
    • /
    • 1998
  • 이 연구에서는 HVPE법으로 두께가 350$\mu\textrm{m}$, 면적이 100$\textrm{mm}^2$인 크랙이 없는 freestanding GaN 단결정 기판을 제작하고, 그 특성을 조사하였다. 제작된 GaN 기판의 격자상수는 $c_{o}$ =5.18486$\AA$이었고, 이중 X-선 회절피크의 반치폭은 650 arcsec 이었다. 10K의 온도에서 측정한 PL 스펙트럼은 에너지 밴드 갭 부근에서 중성 도너와 중성 억셉터에 구속된 여기자 및 자유여기자의 소멸에 의한 발광과 결정 결함고 관계하는 깊은 준위에 의한 1.8eV 부근 발광으로 구성되었다. 또한 라만 E2(high)모드 주파수는 567cm-1로서 벌크 GaN 단결정의 값과 같았다. 한편, GaN 기판의 전기저항도형은 n형이었고, 전기 비저항은 0.02$\Omega$.cm이었으며, 캐리어 이동도와 농도는 각각 283$\textrm{cm}^2$/V.s와 1.1$\times$$10^{18}$$cm^{-3}$이었다.

  • PDF

240 GHz, 1.485 Gbps 비디오신호 무선 전송 시스템 (A 1.485 Gbps Wireless Video Signal Transmission System at 240 GHz)

  • 이원희;정태진
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권4호
    • /
    • pp.105-113
    • /
    • 2010
  • 240 GHz 대역의 캐리어 주파수를 이용하여 1.485 Gbps 비디오 전송 시스템을 설계 및 시뮬레이션 하였다. 송수신기는 Schottky Barrier 다이오드 기반의 Sub-harmonic 믹서를 이용하였으며 특히, 수신기는 Heterodyne 및 Direct Detection 두 가지 방식을 적용하여 각각의 성능을 시뮬레이션 하였다. 변조방식은 ASK이며, 수신기에서는 Envelop 검출 방식을 사용하였다. 송신기 시뮬레이션 결과 Sub-harmonic 믹서의 LO 전력 7 dBm(5 mW)에서 IF 입력 전력 -3 dBm(0.5 mW)일 때 RF 출력 전력은 -11.4 dBm($73{\mu}W$)이었으며, SSB(Single Side Band) Conversion Loss는 8.4 dB이다. VDI사의 상용모델 WR3.4SHM(220~325 GHz)의 240 GHz에서의 Conversion loss 8.0 dB(SSB)와 근접한 결과를 얻었다. 1.485 Gbps NRZ 신호전송 시뮬레이션 결과 전송신호와 동일한 수신 파형을 얻었다.