• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.258-269
• /
• 2020

This paper proposes Snapping Shrimp Noise (SSN) detection and corrupted Orthogonal Frequency Division Multiplexing (OFDM) reconstruction methods to increase Bit Error Rate (BER) performance when OFDM transmitted signal is corrupted by impulsive SSNs in underwater acoustic communications. The proposed detection method utilizes multilayer wavelet packet decomposition for detecting impulsive and irregularly concentrated and SSN energy in specific frequency bands of SSN, and the proposed reconstruction scheme uses iterative decision directed-subcarrier reconstruction to recover corrupted OFDM signals using multiple carrier characteristics. Computer simulations were executed to show receiver operating characteristics curve for the detection performance and BER for the reconstruction. The practical ocean experiment of SAVEX 15 demonstrated that the proposed method exhibits a better detection performance compared with conventional detection method and improves BER by 250% and 1230% for uncoded and coded data, respectively, compared with the conventional reconstruction scheme.

• Journal of Power Electronics
• /
• 제16권5호
• /
• pp.1791-1801
• /
• 2016

This paper considers a carrier based signal injection method for use in the three shunt sensing inverter (TSSI) for sensorless motor control. It also analyzes the loss according to the injection axis of the voltage signal. To remove both the phase current and rotor position sensors, a sensorless method and a phase current reconstruction method can be simultaneously considered. However, an interaction between the two methods can be incurred when both methods inject voltage signals simultaneously. In this paper, a signal injection based sensorless method with the 120° OFF Discontinuous PWM (DPWM) is implemented in a TSSI to avoid this interaction problem. Since one leg does not have a switching event for one sampling period in the 120° OFF DPWM, the switching loss is altered according to the injection axis. The switching loss in the d-axis injection case can be up to 32% larger than that in the q-axis injection case. Other losses according to the injection axis are also analyzed.

• Journal of Periodontal and Implant Science
• /
• 제29권3호
• /
• pp.447-472
• /
• 1999

The preclinical and clinical studies reviewed herein show that rhBMP-2 induces normal physiologic bone in relevant defects in the craniofacial skeleton. The newly formed bone assumes characteristics of the adjacent resident bone, and allows placement and osseointegration of dental implants. Clearly, the bone inducing capacity of rhBMP-2 is carrier and site dependent. rhBMP-2 in an absorbable collagen sponge carrier induces relevant bone formation in space providing defects. Space providing carries extends this possibility to non-space providing sites. Notably, some ceramic and polymeric biomaterials may substantially interfere with rhBMP-2 induced osteogenesis.

• 대한전자공학회논문지SP
• /
• 제40권1호
• /
• pp.130-138
• /
• 2003

Stripmap-mode 합성개구레이더의 고전적인 영상 복원기술은 Range-Doppler 알고리즘이다. 하지만 고해상도 Spotlight-mode 합성개구레이더 시스템에서는 Range-Doppler 알고리즘을 적용했을 때 성능이 상당히 나빠지므로 Spotlight-mode에 맞는 별도의 Inversion 알고리즘이 연구되어왔다. 본 논문에서는 Spotlight-mode 합성개구레이더에서 Raw-data를 처리하기 위한 알고리즘 연구를 통해 기존의 평면파 근사 방법을 이용하고 있는 Polar format 알고리즘과 근사 방법을 사용하지 않는 Wavefront Reconstruction 기법에 대한 성능분석을 시도하였다. 이 때 Source 신호의 Carrier 주파수, 합성 개구면 Size, 그리고 표적물의 위치에 따라 두 Inversion기법의 결과 영상을 비교함으로써 Wavefront Reconstruction 기법의 우수성을 입증하였다. Spotlight-mode 합성 개구 레이더 시스템을 시뮬레이션하여 Raw-data를 생성시키고 각 알고리즘에 적용하여 역변환을 통해 영상화된 표적물의 형태로 성능을 비교 분석하였다.

• Journal of Power Electronics
• /
• 제11권6호
• /
• pp.837-845
• /
• 2011

This paper proposes phase current reconstruction techniques for two-phase two-leg and two-phase four-leg inverters using a single current sensor. In the proposed methods, one phase current is sampled simultaneously with a particular branch current by using only one current sensor, and then current reconstruction algorithms are applied to extract the information on two phase currents from the sensor output. The sampled current information is periodically updated at the peak and the valley of the triangular carrier waveform in each switching cycle of pulse-width modulation (PWM). The voltage vector spaces where the phase currents can be reconstructed are evaluated. Compared to the existing method using two individual current sensors in two phases, the proposed schemes can save implementation cost since it is possible to remove one current sensor. In addition, the proposed methods are free from gain discrepancy issues between two current sensors. Simulations and experiments show excellent current reconstruction performance of the proposed methods.

• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.529-536
• /
• 2023

The Morlet wavelet transform method is proposed to analyze a single interferogram with spatial carrier frequency that is captured by an optical interferometer. The method can retain low frequency components that contain the phase information of a measured optical surface, and remove high frequency disturbances by wavelet decomposition and reconstruction. The key to retrieving the phases from the low-frequency wavelet components is to extract wavelet ridges by calculating the maximum value of the wavelet transform amplitude. Afterwards, the wrapped phases can be accurately solved by multiple iterative calculations on wavelet ridges. Finally, we can reconstruct the wave-front of the measured optical element by applying two-dimensional discrete cosine transform to those wrapped phases. Morlet wavelet transform does not need to remove the spatial carrier frequency components manually in the processing of interferogram analysis, but the step is necessary in the Fourier transform algorithm. So, the Morlet wavelet simplifies the process of the analysis of interference fringe patterns compared to Fourier transform. Consequently, wavelet transform is more suitable for automated programming analysis of interference fringes and avoiding the introduction of additional errors compared with Fourier transform.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.246-257
• /
• 2006

In the ship building industry, the generation of a structural analysis model, that is, a finite element model of a hull structure, has been manually performed by a designer and thus has required lots of time as compared with that of a mechanical part, because of many constraints, the complexity, and the huge size of the hull structure. To make this task automatic, a generation method of the structural analysis model is proposed through the reconstruction of the topological information of a hull structural model in this study. The applicability of the proposed method is demonstrated by applying it to the generation of the structural analysis model of a deadweight 300,000ton VLCC(Very Large Crude oil Carrier).

• 한국전자거래학회:학술대회논문집
• /
• 한국전자거래학회 2004년도 e-Biz World Conference
• /
• pp.98-103
• /
• 2004

1. Changing Business Environment; Before and After IT Revolution 2. Network as a Public Innovation; its Possibility and Fundamental Problem 3. e-Aircraft Career System; Reconstruction of 'Keynesian Cradle' from the viewpoint of MOT 4. Short Conclusion： For Plentiful Future of e-Biz Circumstances(omitted)

• Archives of Plastic Surgery
• /
• 제32권3호
• /
• pp.293-298
• /
• 2005

Osseointegrated prosthetic auricular reconstruction can be classified as either direct or indirect. In the $Br{\aa}nemark $ system of direct osseointegration, implants are placed into the mastoid process of the temporal bone. In the Epitec system of indirect osseointegration, implants are inserted into a three-dimensional carrier plate that is fixed to the mastoid by means of screws. We experienced forty-four cases using the indirect system and seventeen cases using the direct system. We compared with two systems by complications, such as skin reaction, implant loosening, implant loss. There were no specific differences in the skin reaction around the implants and abutments in relation to age or system used. The degree of skin reaction was different according to the conditions around the implant: in cases of virgin microtia, a skin flap was used to cover the implant, in contrast to grafted skin coverage for failed autogenous reconstruction. In both systems, the skin reaction was more severe and frequent in skin flap than in grafted skin. Loosening of the implant was more frequent in the direct system; however, accidental detachment of the implant from the abutment was more frequent in the indirect system. To reduce complications of skin reaction in osseointegrated prosthetic auricular reconstruction, it is important for soft tissue around implant to immobilize. Therefore, grafted skin is better than skin flap as soft tissue around implant. And immobilization of soft tissue around implant by wound dressing is major facter.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.125-128
• /
• 2004

Chemical Mechanical Polishing(CMP) in semiconductor production is characterized its output property by Removal Rate(RR) and Non-Uniformity(NU). Some Previous works shows that RR is determined by production of pressure and velocity and NC is also largely affected by velocity of flow-field during CMP. This study is about the direct measurement of velocity of slurry during CMP and reconstruction whole flow-field by Particle Image Velocimetry(PIV) Techniques. Typical PIV system is tuned adequately for inspecting CMP and Slurry Flow-field is measured by changing both Pad RPM and Carrier RPM. The results show that velocity is majorly determined not by Carrier RPM, but by Pad RPM.