• Journal of Communications and Networks
• /
• 제15권3호
• /
• pp.258-265
• /
• 2013

In this study, we investigate the multi-carrier spread spectrum (MCSS) communication system which adopts the self-encoded spread spectrum in a downlink synchronous channel. It is very difficult to completely eliminate the frequency offset in practical channel scenarios. We demonstrate that the self-encoded MCSS (SE-MCSS) with iterative despreading manifests a remarkable immunity to residual frequency offset. The SE-MCSS can be an excellent candidate for the future generation of wireless services.

• Journal of Communications and Networks
• /
• 제15권6호
• /
• pp.569-575
• /
• 2013

In this paper, we present a photonic approach for generating highly stable coherent sub-terahertz (THz) signals for wireless communications. As proof-of-concept we transmit data at 100 GHz carrier frequency using on-off keying modulation and heterodyne detection. The sub-THz carrier signals are generated by photo-mixing two optical carrier signals at different frequencies, extracted from an optical frequency comb. We introduce a novel system to stabilize the phase of the optical carrier signals. Error-free transmission is successfully achieved up to a bit rate of 8.5 Gbit/s at 100 GHz.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.247-251
• /
• 2017

This paper proposes a low power transmission technique for single-carrier modulation with frequency domain equalization. As time domain signals and frequency domain signals have unique corresponding functions, inserting zeros after each symbol causes a repetition in other domain, so maximal ratio combining technique using repetitive transmission can be applied in the frequency domain. In this paper, we configure transmit signals to insert zeros after each symbols for single-carrier modulation with frequency domain equalization and maximal ratio receive combining block in the receiver structures, propose a structure for transmitter and receiver and show that its performance is better than the traditional algorithm by simulations.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.203-206
• /
• 2001

The reduction of chopping noise generated from inverter compressor and the piping design reducing vibration are the most important items in the quality of air conditioner. The chopping noise is identified by the study of the relationship between carrier frequency and natural frequency of the compressor shell. The high carrier frequency is the key factor in reduction of carrier noise. To keep the natural frequencies of the system as far as away from the operating frequencies appears to be the most important factor in the design of piping system.

• 방송공학회논문지
• /
• 제16권1호
• /
• pp.96-107
• /
• 2011

최근 들어 3D HDTV (3-Dimensional High Definition Television)에 대한 연구가 활발히 진행되고 있다. 국내에서도 3D HDTV 방송 서비스를 위하여 기존의 HDTV 전송 방식인 ATSC (Advanced Television Systems Committee) 8-VSB (8-Vestigial Side Band) 시스템을 수정하려는 연구가 진행되고 있다. 그 중에서도 프레임헤더에 PN (Pseudo-Noise)심볼을 삽입하여 반송파 주파수 오차와 반송파 위상 오차 복구를 이루도록 하는 프레임 구조와 VSB 변조방식을 채택하고자 한다. 본 논문에서는 이 시스템을 수정된 ATSC 전송시스템이라 부르려 한다. 수정된 ATSC 전송시스템의 수신기는 방송 신호의 원활한 수신을 위하여 반송파 주파수 오차(심볼속도 대비 최대 1%)를 정확하게 추정하고 복구하여야 한다. 기존 ATSC 시스템이 파일럿 신호를 삽입하여 반송파 주파수 오차를 복구 하였다면, 수정된 ATSC 시스템은 별도의 파일럿 신호 첨가 없이 PN심볼을 이용하게 된다. 본 논문에서는 수정된 ATSC 전송 시스템에 적용 가능한 반송파 주파수 복구 방식을 소개한다. 제안된 방식은 Fitz 알고리즘을 이용한 거친 반송파 주파수 오차 복구부과 간단한 PN심볼 상관 알고리즘을 이용한 미세 반송파 주파수 오차 복구부를 가진다. 그리고 QAM (Quadrature Amplitude Modulation) 변조된 신호는 심볼 정보가 동위상 채널과 직각위상 채널에 존재하는 반면 VSB 변조된 신호는 심볼 정보가 동위상 채널에만 존재하고 직각위상 채널은 단지 동위상 채널의 힐버트 변환된 값이다. 그러므로 VSB 변조된 신호는 QAM 변조된 신호와 같은 고정된 위상을 가지지 못하고, 반송파 주파수 옵셋에 더욱 민감하게 된다. 이 같은 문제를 해결하고 성능을 향상시키기 위하여 이상적인 송수신 시스템에서 수신된 PN 심볼을 이용한 수신된 신호의 위상보정 과정을 수행하게 된다.

• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.353-361
• /
• 2000

The performance of a multi-carrier CDMA system is analyzed considering frequency selective multipath fading and Near/Far effects. The number of multicarrier, multiuser, and arms of RAKE receiver, and the decay ratio of frequency selective multipath fading are used as a parameter for the performance analysis. More over, the distribution and the strength of multiuser interference are also considered. To evaluated the Near/Far effects in a multi-carrier CDMA system, three distribution models are assumed. In the first model. interference to carrier Ratio, I/C, ranges form -4 dB to 4dB, and at each 2 dB interval 20 % of multiuser is assumed to be uniformly distributed. In the second one, I/C ranges from -2 dB to 2 dB, and 33.3% of multiuser is assumed to be equally dispersed at each 2dB interval. The third model is 0 dB of I/C, that is, with perfect power control, multiuser are assumed to be evenly located. In this paper, multi-carrier CDMA system adoption RAKE receiver is proposed to mitigate the frequency selective multipath fading. Form the results, the third model(i.e. perfect power control)shows the best performance, and the narrower range of I/C causes the less effects to the desired signal, which reads to the better performance.

• 한국통신학회논문지
• /
• 제36권5A호
• /
• pp.441-449
• /
• 2011

Orthogonal frequency division multiplexing (OFDM) 환경에서 sample timing offset(STO)과 carrier frequency offset(CFO)은 inter-symbol interference (ISI), inter-carrier interference (ICI) and phase error를 발생 시키는 원인으로 작용하고 있다. OFDM의 특성상 STO와 CFO에 민감하고, 특히 ICI 가 발생될 경우 보상이 어렵다. 또한 보상을 위해 많은 복잡도를 가진 equalizer가 요구된다. 이 논문에서는 블록 파일럿과 동기화 신호를 가지고, feedback방법을 이용해 STO와 CFO의 효과적인 정정 방법을 제시한다. 주파수 축에서 동기화 신호와 pilot을 이용해 추정한 값들을 시간 축으로 피드백 시킨 후, 시간 영역에서 sample & holder의 시간 타이밍과 oscillator의 주파수의 교정을 통해 정정한다. 시뮬레이션 결과 보상기 없이 피드백 구조만으로 STO와 CFO를 보상하여 성능을 개선 시켰다.

• Journal of Communications and Networks
• /
• 제7권1호
• /
• pp.21-28
• /
• 2005

In this paper, we analyze the performance of code division multiple access (CDMA) systems with orthogonal frequency division multiplexing (OFDM) that employ random spreading sequences in an additive white Gaussian noise (AWGN) channel. We obtain the probability density function (pdf) of the multiple access interference and extend the results to OFDM-CDMA systems to determine the pdf of multiple access and inter-carrier interference in terms of the number of users, the spreading length, the number of sub-carriers, and the frequency offset. We consider the synchronous downlink of cellular multi-carrier CDMA and derive a Gaussian approximation of the multiple access and inter-carrier interference. Overall the effect of frequency offset is shown to vary with the system loading. The analysis in this paper is critical for further development into fading channels and frequency selective multipath channels.

• ETRI Journal
• /
• 제36권5호
• /
• pp.783-790
• /
• 2014

In this paper, we first analyze carrier-to-interference ratio performance of the space-frequency block coded orthogonal frequency-division multiplexing (SFBC-OFDM) system in the presence of phase noise (PHN) and residual carrier frequency offset (RCFO). From the analysis, we observe that conventional SFBC-OFDM systems suffer severely in the presence of PHN and RCFO. Therefore, we propose a new inter-carrier interference (ICI) self-cancellation method - namely, ISC - for SFBC-OFDM systems to reduce the ICI caused by PHN and RCFO. Through the simulation results, we show that the proposed scheme compensates the ICI caused by PHN and RCFO in Alamouti SFBC-OFDM systems and has a better performance than conventional schemes.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1515-1526
• /
• 2019

Ear-piercing high-frequency noise from electromagnetic vibrations in motors has become unacceptable in sensitive environments, due to the application of pulse width modulation (PWM) and in consideration of switching losses. This paper proposed a synchronous periodic frequency modulation (SPFM) method based on the interleaving technique for paralleled three-phase voltage source inverters (VSIs) to eliminate PWM vibration noise. The proposed SPFM technique is able to effectively remove unpleasant high-frequency vibration noise as well as acoustic noise more effectively than the conventional periodic carrier frequency modulation (PCFM) and interleaving technique. It completely eliminates the vibration noise near odd-order carrier frequencies and reduces the PWM vibration noise near even-order carrier frequencies depending on the switching frequency variation range. Furthermore, the SPFM method is simple to implement and does not employ additional circuits in the drive system. Finally, the effectiveness of the proposed method has been confirmed by detailed experimental results.