• Proceedings of KOSOMES biannual meeting
• /
• 2002.10a
• /
• pp.59-70
• /
• 2002

A heating cargo is solidified by several reasons during carnage. This study is to analyse a cargo accident which 811, 202 US barrels of Nile Blend crude oil reamined solid in the tanks after discharge. There are some possibilities that low temperature of loading cargo below cloud point and wax appearance temperature at loading time, heating interruption during voyage or discharging, and prohibition of crude oil washing during discharging might influence the cargo solidified. But we concluded that the defect of heating system would most affect the heating cargo solidified locally, and which blocked drain hole of bottom transverse and web frame and they obstruct flow of heating cargo in the tanks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.364-366
• /
• 2017

Unlike general ships, offshore plants require high reliability due to their long operating time at fixed positions when they are operated. Sensor-based status information is required for user and maintenance worker to ensure safety. In this paper, we propose a monitoring system for safety diagnosis and inspection of cargo lift for offshore plant. It consists of a sensor unit mounted on the cargo Lift, an embedded system measurement unit, and a monitoring unit for real-time data verification. It is based on the ship standard network IEC 61162-450 for the exchange of operating information and sensor measurement information in accordance with the upgrading and integration of equipment in maritime.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.89-92
• /
• 2005

This paper describes a system for LNG carrier's loading and discharging work education This system consists of three modules(cargo work simulation, ballast work simulation and loading calculation module), and could be a useful to train mariners boarding on LNG carrier so as to take a suitable action while their ship maneuvering and cargo handling.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.12 no.2
• /
• pp.43-58
• /
• 2004

Up-to-date cargo transport system, CVO(Commercial Vehicle Operations) is the system to manage efficiently cargo distribution as providing at real time the information of cargo location and situation through ITS and GPS technology. In this paper, we proposed the Gate Automation System of harbors among AEI/AVI. To implement his system, we use the DSRC/RFID(Dedicated Short Range Communication / Radio Frequency IDentification) which adopts an wireless communication between RSE(Road-side Equipment) and OBE(on-Board Equipment) on a vehicle. When constructing the Gate automation system of harbors, the business application ability are reviewed practically and the logistics facilities to be constructed in the near future may use this project results according to the international standard and it could help complete integrated logistics system.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.6
• /
• pp.137-146
• /
• 2007

The objective of this paper is to study the establishing system of truck collaboration and to reduce traffic cost for participating transportation enterprises. The system of truck collaboration can enhance the transport efficiency and to reduce traffic cost without new investment for trucks and equipments. The type of truck collaboration should be enumerated (1) the system of head and branch base (2) the system of central terminal (3) the system of separating collection and delivery for cargo (4) the system of cooperating cargo order and truck allocation. The efficiency of truck collaboration is possible to be realized for transportation enterprises, receiver and sender of cargo.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.35-45
• /
• 2004

This paper analyzes the differences in the service quality priorities of air cargo service providers and customers. After having identified what constitutes the decisive factors with regards to air cargo service quslity, research was carried out to evaluate the differences in the service quality priorities of air cargo service providers and customers. Moreover, this paper analyzes these differences by separating air cargo service providers into Korean and international air cargo service providers. In order to attain the objectives of this research, the air cargo service sectors were divided into three general categories: supply capability(H/W), service accountability, and competitiveness of service fees and management capability(S/W). The researchers then placed 6 different criteria into each service category, for a total of 18. The evaluation of the service quality priorities of air cargo service providers and customers revealed very little difference between these two groups. With regards to the service criteria found in each service category, our research found marked differences between the service quality priorities of providers and customers in only three of the 18 criteria. However, we found marked differences in service quality priorities in 7 of the 18 criteria when the air cargo service providers were divided into Korean and international air cargo providers. While domestic air cargo service providers evaluated management's capability to handle cargo accidents and incidents as the most important priority, international air cargo service providers placed the highest priority on the cargo rate system. The results of this research imply that in order to properly evaluate the differences between the service quality priorities of air cargo service providers and customers, the air cargo service providers itself should be separated between the Korean air cargo service providers and the foreign providers because of their respective inherent perception on service quality.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.5
• /
• pp.609-616
• /
• 2018

The cargo handling system, which is composed of a fuel gas supply unit and cargo tank pressure control unit, is the second largest power consumer in a Liquefied Natural Gas (LNG) carrier. Because of recent enhancements in ship efficiency, the surplus boil-off gas that remains after supplying fuel gas for ship propulsion must be reliquefied or burned to regulate the cargo tank pressure. A full or partial liquefaction process can be applied to return the surplus gas to the cargo tank. The purpose of this study is to review the current partial liquefaction process for LNG carriers and develop new processes for reducing power consumption using exergy analysis. The developed partial liquefaction process was also compared with the full liquefaction process applicable to a LNG carrier with a varying boil-off gas composition and varying liquefaction amounts. An exergy analysis showed that the Joule-Thomson valve is the key component needed for improvements to the system, and that the proposed system showed an 8% enhancement relative to the current prevailing system. A comparison of the study results with a partial/full liquefaction process showed that power consumption is strongly affected by the returned liquefied amount.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.1
• /
• pp.15-21
• /
• 2023

In modern society, the delivery service market has grown explosively due to rapid changes in social structure and the recent COVID-19 pandemic. Therefore, various problems such as injury to workers and an increase in human accidents are occurring due to the loading and unloading of parcels. In order to solve this problem, domestic company n is developing a "robot-based cargo loading and unloading system". In developing a new technology system, quantitative reliability targets should be set for efficient operation and development. In this paper, reliability analysis was conducted through field data for the pneumatic gripper of the "robot-based cargo loading system". The reliability of the failure data was analyzed to estimate the distribution parameters and MTTF. Random data was derived for the probability of occurrence of a failure with the estimated value. By repeating the simulation to predict the number and year of failures according to the estimated parameters of the probability distribution, it was proposed as a method that reflects realistic probabilities rather than calculating with simple arithmetic using the average MTTF previously used in the field.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.219-220
• /
• 2012

• Proceedings of the Safety Management and Science Conference
• /
• 2008.11a
• /
• pp.579-582
• /
• 2008

The wave of 4PL added to strategic consulting based on new IT techniques, for example RFID, with logistics outsourcing through existing 3PL service is a great issue. It is also worthy of notice that EPCglobal network strengthen the role of 4PL. In conclusion, the 4PL system based on EPCglobal network will result in a good success, so it will raise a prestige of air cargo in Korea to a higher position. This study deals with the new logistics system, air cargo logistics system based on u-4PL system, RFID and EPCglobal network, that will bring many advantages.