• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.881-888
• /
• 2019

Dangerous cargo in maritime transportation is increasing in international trade. The types and forms of dangerous cargo are very diverse, complex, and the scope is expanding widely. For this reason, it is increase risk of accident threatens the safety of ships and other cargoes, as well as serious damage. Carriers' require special care and handling of dangerous cargo and have a duty of care for safe transport. The shipper is obliged to notify the carrier of the nature and characteristics of the dangerous cargo prior to loading on the ship, the responsibility of the carrier varies depending on the notification or not. This study compares and analyzes the concept and classification of dangerous cargoes, the provisions of the Hague rules, Hamburg Rules and Rotterdam Rules about Carriers' Dangerous Cargo Liability Regulations, after reviewing case studies. We intend to provide information to dangerous cargo handling, the carrier.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2020

In recent years, cargo lashing has received much importance, to help prevent the sinking of passenger ships due to the failure of vehicle and cargo lashing during the transshipment of cargo. Consequently, the standards for lashing equipment and the structure of car ferries have been revised. According to the current standards, all vehicles loaded on a car ferry sailing in smooth sea areas must be secured if the wind speed and wave height exceed 7 m/s and 1.5 m, respectively. In this study, we measured the roll and pitch of a passenger ship sailing in smooth sea areas, and compared the measurements with the results of the New Strip Method (NSM). The vessel had a maximum pitch of 1.41° and a maximum roll of 1.37° at a wind speed of 6-8 m/s and a wave height of 0.5-1.0 m, and a maximum pitch of 1.49° and a maximum roll of 2.43° at a wind speed of 10-12 m/s and a wave height of 1.0-1.5 m. A comparison of the external forces due to the motion of the hull and the bearing capacity without lashing indicated that the bearing capacity was stronger. This suggests that vehicles without lashing will not slip or fall due to weather conditions. In future, the existing vehicle lashing standards can be revised after measuring the hull motions of various ships, and comparing the external force and bearing capacity, to establish more reasonable requirements.

• Journal of Navigation and Port Research
• /
• v.32 no.6
• /
• pp.425-431
• /
• 2008

The future cargo transportation and traffic volume on container in Gwangyang port was forecasted by using univariate time series models in this research. And the container ship traffic was produced. The constructed models all were most adapted to Winters' additive models with a trend and seasonal change. The cargo transportation on container in Gwangyang port was estimated each about 2,756 thousand TEU and 4,470 thousand TEU in 2011 and 2015 by increasing each 7.4%, 16.2% compared with 2007. The volume per ship on container was estimated each about 675TEU and 801TEU in 2011 and 2015 by increasing each 30.3%, 54.6% compared with 2007. Also, traffic volume on container incoming in Gwangyang Port was prospected each about 4,078ships and 5,921ships in 2011 and 2015.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.641-647
• /
• 2019

Yearly world vehicle production has continued to increase, and the global seaborne trade volumes also are recovering. Based on these positive trends, as demand for cargo ships increases in the freight transportation market, Pure car and truck carriers (PCTCs) with large gaps between decks continue to be ordered. The structural analysis of the cargo hold was performed in order to confirm its structural safety in accordance with the guidance for the direct strength assessment of the Korean Register (KR) of Shipping. And, according to the type of cargo, the maximum deflection and structurally weak area that occurred in deck 5 was confirmed. Also, it was found that the weight of the cargo had a significant effect on the deck, the primary members of the deck's structure, and pillars. The results of the structural analysis conducted in this study were added to the existing cargo load planning software. This was done so that the prediction of the maximum stress and the deflection of the deck based on the information about the cargo could be confirmed quickly. In addition, the data will be used as the basic data for rapid information management response to changes in cargo items.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.3
• /
• pp.27-36
• /
• 2006

The port, differently from general working place, is a closed area to execute security, customs, and quarantine procedures. The loading and unloading is being done differently by cargoes, ships, berths, and equipments. To load and unload a lot of equipments and different types of labor are required, in which work flow is very complicated. As above mentioned the port is very unique and deteriorated working place including danger. The purpose of this thesis is to propose ways to analyze and establish the preventive measure for cargo handling accidents in port. We have collected 923 accidents happened at Incheon Port during the period from 1994 to 2003. And to analyze and establish the preventive measure we have employed an advanced 6sigma DMAIC technology presently in spotlight as the best tool for management innovation. For the purpose of effective safety management of cargo handling in port, this thesis will help to revise and establish the law, system, standard, and standard working manual with respect to the port loading and unloading system. Now frequency of cargo handling accidents in port is highest for the second time among all industries, so we proposed the new safety management system to substitute port safety committee and to take full charge of safety in Ministry of Maritime Affairs and Fisheries.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.2
• /
• pp.333-342
• /
• 2017

In this study, we studied and analyzed 3,751 ships regarding detention list of Tokyo MOU from 2013 to 2015 total for 36 months. The Member Authorities of the MOU has 20 committee consists of Korea and Peru joined in 2015. 1,250 ships in a year and 140 ships in a month are granted PSC Action Code-30 corresponding to detention. Averagely, 30,943 ships in a year and 2,579 ships have been received PSC inspection. Additionally, according to this PSC inspection, rate of Detention reaches to 4.04%. When it comes to Korean Flag Ships however, the number of Detention ships of Tokyo MOU has been rather increased from 3 ships in 2013 to 18 ships during 2years. Furthermore, MOU in the all over the world, the number of ships had Detention has largely increased from 5 ships to 9 up-to 19ships. The number of Detention Ships has been reached to 44.8% of 1~2 days period of Detentions, under 3~10 days period of Detentions reaches to 34.7% and over 10 days detention reaches 10.3%, which cause economically enormous loss. Continually, each MOU has been implemented Concentrated Inspection Campaign(CIC) annually. Each MOU including Tokyo MOU implemented "Crew Familiarization for Enclosed Space Entry" for 3 month from september, and During this period, Concentrated Inspection were carried out to 8,429 ships of Tokyo MOU. Accordingly, If ships and owners can get the information of CIC and deliver the information to the ship, then Ships can minimize the rate of Detention by thoroughly preparing for PSC Inspection. In addition, Bulk Carrier and General Cargo ship occupy 50% of rate of Detention and it shows that majority of list among Nature of Deficiencies are identical. Finally, If we can obtain the information of the ships inspected previously, We can reduce the number of detention by preparing for PSC inspection. And this will be able to contribute to shipping industry also.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.1
• /
• pp.85-89
• /
• 2012

This study has been conducted to compare two cargo handling systems on MR tanker and Panamax tanker. Submerged hydraulic cargo pumps with hydraulic power packs and frequency converter controlled electric deepwell pumps will be investigated and compared on all aspects of initial cost, installation, operation and maintenance. The result of investigation shows Electric Systems have less manufacturing costs, higher environmental friendliness and reliable operation compare to Hydraulic Systems. Furthermore, the present experimental data will provide important database for Electric Systems onboard new ships and practical and empirical guidelines are constructed for further determine the design of the Electric Systems.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.3 s.70
• /
• pp.77-81
• /
• 2006

In this study, design parameters of ice-transiting vessels in the world, currently in service or under construction, were collected and a database of principal particulars for each ship was established. To understand the recent design trend, ice-transiting vessels were categorized into four groups, i.e., conventional icebreakers, icebreaking tug/supply/research vessels, ice-strengthened passenger/car ferry and ice-strengthened cargo vessels. Changes in principal particulars for each group were reviewed and summarized. It was found that the most significant change in the design of ice-transiting vessels was the increment of large size commercial cargo vessels. It is believed that the recent hike of oil prices and booming of Russian economy has resulted in the need for year-round operation with bigger ships in the Baltic Sea and in the Sea of Okhotsk and also along the Northern Sea Route in Russian Arctic Sea.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.207-212
• /
• 2006

The noise levels on board ship recognized at Europe in the early 1970s and the noise regulations on board ship began to put in a statutory form. After that, in 1982 "International Code on Noise Levels on Board Ships" adopted by IMO and it became standard to the newly built ship and remain so to this day. Especially, the ship engine room, which have huge main engine and various kinds of subsidiary machines, is under an extremely loud condition and so the worker who works in it is easy to lose his hearing. Recently, each nation regulates the allowable noise exposure time by law to protect the industrial employee from the occupational hardness of hearing. In our country, the allowable noise exposure time is regulated by the labor standard law but the international provisions regulated by IMO have been applied in case of the ship engine room. In this paper, the cabin's noise levels of cargo-passenger ships plies south-west coast line were investigated.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.2
• /
• pp.167-178
• /
• 1997

It has been expected not only for crew but also for passengers to realize a ship whose rolling and other motions are small as much as possible. Restricting our consideration to the roll reduction, the conventional roll stabilization system, fins or anti-rolling tanks hve been utiized as the actuator. Excessive motions would interfere with the recreational activities of passengers on a cruise ship. Often more than half of the load of a containership is stowed above deck where it is subjected to large acclerations due to rolling. In some situations this may cause some internal damage to the contents of the containers; in more severe situations failure of the lashing can occur and containers may be lost over-board. Underdeck cargo in ordinary cargo ships and bulk commodities in colliers, ore ships and grain ships can shift if the motions become too severe. The purpose of this study is to concentrate on the additions. either internal or external to the hull, that reduce or otherwise improve the motion responses of the hull. It is assumed that the additions are such that their benefit to the motions of the ship outweights any impact on the ability of the ship to perform its assigned task. It is particularly challenging to obtain large improvements in the motion characteristics of existing ships that are being rebuilt or modified for some task not anticipated in their original design. Further the authors will statistically analyze the influence of ruder-roll-yaw coupling motion in the case of application of this advanced control method to various kinds of ship.