• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2010년도 춘계학술대회
• /
• pp.385-386
• /
• 2010

선박의 상하동요 및 종동요 간의 내항성능은 승객에게 피로감을 주며, 적재된 화물과 선체에 탑재된 재설비에 구조적 하중을 가져오게 된다. 이러한 점을 개선하기 위해 소형 카타마란 파워요트 설계시 해당 실적선 조사와 선저형상을 결정하여 선형을 설계하였다. 본 연구에서는 국내 연안의 해양환경에 대한 기초자료를 토대로 운동성능 해석조건을 선정하였다. 이를 통해 카타마란형 레저선박의 운동성능을 선속에 따라 고찰하였다. 파도와 선박의 만남각에 따른 내항성능을 추정하여, 파랑의 만남주파수에 대한 응답진폭비와 운동성능이 우수한 영역에 대해서 평가하였다.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.646-656
• /
• 2015

This study investigates the conditions of Korean naval duty and combat uniforms to develop a new design. Survey participants consisted of, 723 Sailors ($25.3{\pm}6.9yr$ in age, $43{\pm}53$ months in work experience, $174{\pm}6cm$ in height, $71{\pm}9kg$ in body mass) serving in the Korean Navy for over 12 months. The questionnaire consisted of 72 questions about anthropometric characteristics, preferred design, textiles, wear mobility, and subjective perceptions. The results showed that the preferred colors for future naval duty uniforms were blue in summer (69%) and black in winter (62%). Digital camouflage pattern (60%) and darker colors on the inside of shirt collar (87%) and the edge of sleeves (84%) were preferred. They favored more than one pocket on the upper arm and chest of the shirts (58%), narrower width around pant legs and hems than the current clothing (63%), self-controlled elastic waist (55%) and no cargo type pocket on the pants (45%). There were requirements to alleviate excessive heat stress in summer and to protect from the cold and wind in winter. Wrinkle-free (85%), anti-bacterial (78%), water-proof (75%), oil-proof (90%), and elastic (67%) textiles were preferred for Korean navy uniforms. These results will be applied to develop the next generation Korean navy uniforms.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권7호
• /
• pp.1051-1060
• /
• 2008

Now days, various types of ships are operated to transport both cargo and passengers all around the world. Most of the important auxiliary machinery installed in those ships is fluid machinery such as pumps, compressors, and fans. A large percentage of fluid machinery is pumps which are classified as turbo and positive displacement pumps. This paper analyzes only turbo pumps out of the two types. This thesis has two aims: (a) to analyze the present status of pumps installed in merchant and training ships and (b) to find the correlation among sea going pump kW, port pump kW, GE kW, ME MCR, number of pumps, ME kgf, pump kgf. Based on the ship's type, my paper seeks to find special characteristics as a result of analyzing head, flow rate, and kW. Moreover this paper analyzes and compares number of pumps, rpm of pumps, pump kW/ME MCR and pump kW/GE kW under the conditions of seagoing and berthing according to the ship's type. In conclusion, (1) For the exact comparison, information on the head, kW, flow rate, number of pumps by ship's type, the pump installation status of the Merchant Ships and Training Ships were tabulated and compared in this paper. (2) In order to qualify one ship as the delegate ship, several methods were used. The result of the examination indicates that the chosen ships could be justified as a suitable representation of ships of their own type. (3) The correlation of several values(total pump kW, port pump kW, GE kW, seagoing pump kW, pump weight, ME weight, ME MCR, number of pumps and ME kW) could be obtained.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.404-407
• /
• 2018

1장 - 자동차는 엔진에서 만든 동력을 바퀴에 전달하여 지상에서 승객이나 화물을 운반하는 교통 수단이다. 과거에 내연기관에서에서 출발한 자동차는 최근에는 전기자동차와 혼합된 하이브리드와 순수 전기자동차 등이 출시되고 있다. 이로 인한 다양한 부품으로 인한 기술의 발전 및 안정성 강화 등으로 첨단 전기 전자제품의 배치는 증가할 수 밖에 없었고 그로 인해 전자파 환경은 더욱 복잡하고 다양할 수 밖에 없다. CISPR 25에서는 전자기파 노이즈에 대한 시험 방법에 대해서 연구를 진행 중에 있다. 그 중 복사방출 시험에서 요구된 GND 조건에 따른 노이즈 패턴을 분석 하기 위해 다양한 조건을 적용해 비교 검증하고자 한다. 2장 - EMI 챔버의 일반적인 특성 기술, 시험 법 및 측정 장비에 대해 기술한다. 3장 - RE 시험 : 시료가 Center에 있을 때 Ground Strap 변화에 따른 노이즈 분석, 시료가 Center가 아닌 다른 곳에 있을 때 Ground Strap 변화에 따른 노이즈 분석 검증 하고자 한다.

• 한국전산구조공학회논문집
• /
• 제27권5호
• /
• pp.379-384
• /
• 2014

본 논문은 갠트리 크레인의 설계를 위해 컨테이너 하역작업 시 특정하중 조건하의 RTGC(Rubber Tired Gantry Crane)의 동적거동과 그에 따른 윤하중을 분석한 내용을 기술하고 있다. 먼저 RTGC의 동적거동을 살펴보기 위해 거대 구조물인 크레인의 유한요소 모델을 개발하고 고유진동수와 고유모드의 모달시험결과를 이용하여 유한요소모델을 검증하였다. RTGC의 기타 부속품은 3차원 CAD모델링을 통해 다물체 동역학해석 소프트웨어인 ADAMS에서 강체로 모델링하였다. 본 연구에서 하중 조건은 일반적인 컨테이너의 이송조건(OP1)과 외부부하조건 없이 단순히 트롤리를 이용하여 컨테이너를 하역하는 2가지 경우로 고려하였다. 해석 결과 RTGC의 컨테이너 작업 시 발생하는 크레인의 진동은 거대 구조물의 강성과 변형에 주로 기인함을 확인하였으며 이러한 크레인의 진동은 RTGC의 움직임을 발생시켜 컨테이너 하역작업 불능 등의 거동을 발생시킬 수 있음을 분석할 수 있었다.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.246-253
• /
• 2014

Liquid natural gas is stored and transported inside cargo tank which is made of specially designed cryogenic materials such as 9% Ni steel, Al5083-O alloy and SUS304 and so on. The materials have to keep excellent ductile characteristics under the cryogenic environment, down to -163oC, in order to avoid the catastrophic sudden brittle fracture during the operation condition. High manganese steel is considered to be the promising alternative material that can replace the commonly used materials mentioned above owing to its cost effectiveness. In line with this industrial need, the mechanical properties of the high manganese steel under both room and cryogenic environment were investigated in this study focused on its tensile and fatigue behavior. In terms of the tensile strength, the ultimate tensile strength of the base material of the high manganese steel was comparable to the existing cryogenic materials, but it turned out to be undermatched one when welding is involved in. The fatigue strength of the high manganese steel under room temperature was as good as other cryogenic materials, but under cryogenic environment, slightly less than others though better than Al 5083-O alloy.

• Journal of Radiation Protection and Research
• /
• 제43권3호
• /
• pp.97-106
• /
• 2018

Background: A cargo container scanner using a high-energy X-ray generates a fan beam X-ray to acquire a transmitted image. Because the generated X-rays by LINAC may affect the image quality and radiation protection of the system, it is necessary to acquire accurate information about the generated X-ray beam distribution. In this paper, a diode-based multi-channel spatial dose measuring device for measuring the X-ray dose distribution developed for measuring the high energy X-ray beam distribution of the container scanner is described. Materials and Methods: The developed high-energy X-ray spatial dose distribution measuring device can measure the spatial distribution of X-rays using 128 diode-based X-ray sensors. And precise measurement of the beam distribution is possible through automatic positioning in the vertical and horizontal directions. The response characteristics of the measurement system were evaluated by comparing the signal gain difference of each pixel, response linearity according to X-ray incident dose change, evaluation of resolution, and measurement of two-dimensional spatial beam distribution. Results and Discussion: As a result, it was found that the difference between the maximum value and the minimum value of the response signal according to the incident position showed a difference of about 10%, and the response signal was linearly increased. And it has been confirmed that high-resolution and two-dimensional measurements are possible. Conclusion: The developed X-ray spatial dose measuring device was evaluated as suitable for dose measurement of high energy X-ray through confirmation of linearity of response signal, spatial uniformity, high resolution measuring ability and ability to measure spatial dose. We will perform precise measurement of the X-ray beamline in the container scanning system using the X-ray spatial dose distribution measuring device developed through this research.

• 한국정보통신학회논문지
• /
• 제17권7호
• /
• pp.1544-1550
• /
• 2013

최근에는 미국에서 개발 및 관리하는 위성항법시스템과(GPS)와 러시아에서 운용하는 위성항법시스템(GLONASS)을 함께 수신하여 컨테이너 보안 장치에 활용함으로서 물류 효율성을 향상시키기 위한 방안이 연구되고 있다. 본 논문에서는 컨테이너화물 안전수송에 사용되는 컨테이너 위치 수신 안테나를 설계 및 제작하여 그 성능을 검증하였다. 제작된 안테나는 물류시스템에 운영할 수 있도록 물류 환경에 맞춰 광대역 원편파 특성과 GPS/GLONASS 듀얼 주파수 지원 가능하도록 성능을 최적화 하였다. 정재파비(VSWR) 2:1에서 대역폭은 26.1MHz이며 GPS(1575.42MHz)와 GLONASS(1602MHz)의 반사손실은 -9.54dB로 나왔다. 개발 완료한 안테나는 실제 한국간 러시아 물류 환경에 적용함으로써 GPS/GLONASS 신호가 국가 간 이동에도 정상적으로 수신됨을 시범 운영 테스트를 통해 성능 검증을 확인 하였다.

• 한국의류학회지
• /
• 제23권3호
• /
• pp.447-458
• /
• 1999

The purpose of this study was to analyze jeans market faced with economic difficulties to provide jean's maker with a large representative data base for jeans marketing strategy. This study surveyed jeans market and analyzed brand awareness. brand image and consumer's seeking image for 700 young adults. The 700 questionnaires were distributed at the five locations(Opkujung Shinchon Munjungdong, Shinrimdong '||'&'||' Suwon) and 656 reliable ones were used for statistical analysis. A. SAS statistical package including frequency table factor analysis. analysis of variance. and Duncan's multiple range test was used. The results are as follows : 1. Brand awareness involves "brand recall" based on asking a person to name recalled first and "brand rcognition" based on asking to identify brand name from 30 given brands. The result indicated that "Levis" was dominant for brand recall and Guess was dominant for brand recognition. 2. Regarding the brand image the result showed that "Vov" was best represented for sophisticated '||'&'||' trendy brand images "Storm" for characteristics brand image "Jambangee" for reasonable price '||'&'||' comfortable brand images and "Levis" for classic '||'&'||' design/color brand images. 3. As a result of factor analysis on consumer's seeking image six factors(characteristic/gay, intelligent/sexy, feminine/sophisticated , active/functional, cute/young, simple/comfortable) were found. Several factors had a relationship with demographic variables and preferred design. 4 Many young adults favored following design details ; low waist relaxed thigh with straight leg and long length up to the end of shoes. Also they preferred basic pocket to cargo pocket and simple logo accessories to metal ones.simple logo accessories to metal ones.

• 대한조선학회지
• /
• 제17권1호
• /
• pp.25-29
• /
• 1980

For the preliminary estimation of the vertical hull natural frequency, the Schlick's or Schlick-type formulae have been traditional ones and are still in common use today. Some investigators have made their efforts, based on statistical data of ships' system parameters, to extend the applicability of Schlick-type formulae to higher modes, or to utilize the Rayleigh method. For instance, the work done by Dinsenbacher et al.[5] belongs to the former and that of Nagamoto et al.[6] to the latter. In a part of his previous paper[7], the author, investigating the case of a cargo ship of medium size, suggested that provided statistically simplified curves such as trapezoid of system parameter distributions are available in hands, direct utlization of an ordinary computer program can be also an another convenient method by which we can obtain both natural frequencies and normal mode shapes. In this paper, to confirm the feasibility of the above suggestion, four high speed boats are investigated. The system parameters of them are originally given in [5]. The computer program used here is one confiled based on a calculation method derived from Myklestal-Prohl modeling of hull, transfer matrix formulation and an extended Gumbel's initial value method for solving frequency equation. The results of the investigation show that the direct calculation based on statistically oriented and reasonably assumed trapezoidal mean curves of system parameter distributions can give us natural frequencies within about 5% deviation up to several-noded modes and normal mode shapes serviceable at least up to 4- or 5-noded modes in comparision with those based on actual distributions of system parameters. For this simplified method the actual data required for input are only of ship length, displacement, total added mass, bending and shear rigidity at amidship. They are available at the early stage of design. By this method we can also easily trace variations of vibration characteristics in the course of ship design cycles.