• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1563-1570
• /
• 2017

In order to perform dry interim storage and transportation of the spent-fuel assemblies of the Bushehr Nuclear Power Plant, dual-purpose casks can be utilized. The effectiveness of different neutron-shield materials for the dual-purpose cask was analyzed through a set of calculations carried out using the Monte Carlo N-Particle (MCNP) code. The dose rate for the dual-purpose cask utilizing the recently developed materials of $epoxy/clay/B_4C$ and $epoxy/clay/B_4C/carbon$ fiber was less than the allowable radiation level of 2 mSv/h at any point and 0.1 mSv/h at 2 m from the external surface of the cask. By utilization of $epoxy/clay/B_4C$ instead of an ethylene glycol/water mixture, the dose rates on the side surface of the cask due to neutron sources and consequent secondary gamma rays will be reduced by 17.5% and 10%, respectively. The overall dose rate in this case will be reduced by 11%.

• Journal of Forest and Environmental Science
• /
• v.37 no.2
• /
• pp.116-127
• /
• 2021

Predicting carbon distribution of soil aggregates is difficult due to complexity in organo-mineral formation. This limits global warming mitigation through soil carbon sequestration. Therefore, knowledge of land use effect on carbon stabilization requires quantification of soil mineral cations. The study was conducted to quantify carbon and base cations on soil mineral fractions in Natural Forest, Plantation Forest and Farm Land. Five 0.09 ha were demarcated alternately along 500 m long transect with an interval of 50 m in Natural Forest (NF), Plantation Forest (PF) and Farm Land (FL). Soil samples were collected with soil cores at 0-15, 15-30 and 30-45 cm depths in each plot. Soil core samples were oven-dried at 105℃ and soil bulk densities were computed. Sample (100 g) of each soil core was separated into >2.0, 2.0-1.0, 1.0-0.5, 0.5-0.05 and <0.05 mm aggregates using dry sieve procedure and proportion determined. Carbon concentration of soil aggregates was determined using Loss-on-ignition method. Mineral fractions of soil depths were obtained using dispersion, sequential extraction and sedimentation methods of composite soil samples and sieved into <0.05 and >0.05 mm fractions. Cation exchange capacity of two mineral fractions was measured using spectrophotometry method. Data collected were analysed using descriptive and ANOVA at α_0.05. Silt and sand particle size decreased while clay increased with increase in soil depth in NF and PF. Subsoil depth contained highest carbon stock in the PF. Carbon concentration increased with decrease in aggregate size in soil depths of NF and FL. Micro- (1-0.5, 0.5-0.05 and <0.05 mm) and macro-aggregates (>2.0 and 2-1.0 mm) were saturated with soil carbon in NF and FL, respectively. Cation exchange capacity of <0.05 mm was higher than >0.05 mm in soil depths of PF and FL. Fine silt (<0.05 mm) determine the cation exchange capacity in soil depths. Land use and mineral size influence the carbon and cation exchange capacity of Gambari Forest Reserve.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2005

The electrocatalytic reduction of O₂ was investigated with methyl viologen and methylene blue incorporated clay-modified electrodes. Clay suspensions were prepared with Na-montmorillonite, Ca-montmorillonite, and kaolinite. The methyl viologen-clay modified electrodes were made by coating clay suspensions adsorbing methyl viologen on a glassy carbon electrode. Cyclic voltammetry were performed in aqueous media to investigate the electrocatalytic property of the modified electrode in reducing O₂. A Na-montmorillonite modified electrode showed the greatest adsorption capacity for methyl viologen. The modified electrode made of Na-montmorillonite suspension of 0.87 g/10 mL and a 2.5 mM of methyl viologen solution showed the most effective electrocatalytic property, where the catalytic reduction potential was shifted by 242.6 mV toward the positive potential. The electrocatalytic ability was more significant in acidic (pH=3.7) and alkaline (pH=12.7) media than the neutral pH range (6.3∼8.3). The methyl viologen-Na-montmorillonite modified electrode had the good reproducibility and maintain the electrocatalytic property over 20 times reuse.

• Elastomers and Composites
• /
• v.46 no.2
• /
• pp.112-117
• /
• 2011

Recently, high growth potential of barrier materials industry including high performance packing materials was expected with increasing the national income and well-being culture. As high barrier materials, polymer nanocomposites have considerable attractions due to their excellent physical properties compared to conventional composite materials. In general, polymer nanocomposites were consisted of polymer matrix and inorganic fillers, such as layered silicate, carbon nanotubes, and metal- or inorganic nanoparticles. Among these materials, layered silicate which was called as the clay was usually used as nano-fillers because of naturally abundant and most economical and structural properties. Clay-reinforced polymer nanocomposites have various advantages, such as high strength, flammability, gas barrier property, abrasion resistance, and low shrinkage and used for automotive and packing materials. Therefore, in this paper, we focused on the need of gas barrier materials and materials-related technologies.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.6
• /
• pp.117-126
• /
• 2005

The chemical property analysis on the deposited clay using scanning electron microscope and energy dispersive x-ray spectrometer were performed. Also, the triaxial compression tests and consolidation tests using NaCl aqueous solution and leachate as substitute pore (or saturated) water in samples were carried out to find out the behaviour characteristics of strength and deformation of contaminated deposited clay. from the chemical composition analysis results of clay samples, the magnitudes of composition ratio were revealed in the order of O, C, Si, Al, and Fe. Of these, why the ratio of carbon appeared to be large is estimated as due to the increase of the phyto-planktons after the construction of tide embankment. In the triaxial compression test and consolidation test results, the shear strength and compression properties have increased with the increase in concentration of contaminant (NaCl). This phenomenon is considered as to be caused by the changes of soil structure to flocculent structure owing to the decrease in the thickness of diffuse double layer in proportion to increase in the concentration of electrolyte.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.121-125
• /
• 2009

농업과 환경분야에서 토양 상태를 신속하고 주기적으로 모니터링하는 것에 대한 관심이 높아지고 있다. 토양의 특성을 측정하는 기존의 화학분석 방식은 분석의 정밀도, 시료의 수, 분석항목 등에 따라 시간, 인력, 비용적 소모가 커진다. 최근에는 식품, 농업, 환경 분야에서 신속하고 비파괴적 분석 방법으로 가시 근적외선 분광학을 도입하고 있다. 가시 근적외선 영역(VNIR, 400-2400 nm)에는 다양한 물질의 고유한 흡수분광형태가 존재한다는 이론적 토대로부터 물질의 정성 정량적 분석이 가능하다고 알려져 있다. 본 연구에서는 VNIR 분광 스펙트럼으로부터 Al, organic carbon (OC), clay, silt, sand, CEC (Cation exchange capacity), CEC/clay 등의 토양 특성을 정량하고자 하였다. 농경지에서 채취한 94개 토양시료를 기존의 화학분석 방법으로 분석하고 실내에서 VNIR 스펙트럼을 측정하였다. 스펙트럼은 원시형태와, 1차, 2차 도함수로 변환된 형태 모두 partial least square regression (PLSR) 모델에 적용하였다. PLSR에 의한 토양특성 추정식은 RMSE, $R^2$, SDE, RPD 값을 이용하여 검증하였다. Al, OC, silt, sand 함량에 대해서는 통계적으로 유의한 수준의 추정값을 산출하였고, clay와 CEC/clay에 대해 추정한 값은 실측값과 약한 상관성을 나타내었다. 이러한 분광학적인 추정 기법은 영상을 이용한 정성 정량분석에 활용될 수 있을 것으로 사료된다.

• The Korean Journal of Mycology
• /
• v.26 no.1 s.84
• /
• pp.51-55
• /
• 1998

After bottle culture of Pleurotus ostreatus, sawdust was taken out from the bottle and accumulated in the middle of March, and then composted. As the result, Y value was decreased rapidly 30 days after composting, and it was decreased slowly after 30 days. It is considered that 118 days is required for composting, however, it is possible to use for casing material after at least 48 days composting. The pH and total nitrogen content of sawdust based on composting period had tendency to increase as composting was processed. Total carbon and C/N rate had tendency to decrease as time went on. Based on the rate of 10, 30 and 50%, each sawdust was added to clay loam used as casing material for culturing A. bisporrus. Among various treatments, the mycelial growth of A. bisporus was more favorable in the treatment of 30% sawdust than in the single treatment of clay loam. Based on the date necessary for primodium formation of A. bisporus, the primodium formation in the treatment of 30% sawdust was reduced to about 5 days as compared with that of any other treatments When 30% sawdust was added to clay loam used as casing material for culturing A. bisporus, the yield of its fruiting body was increased to 28%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.4
• /
• pp.139-147
• /
• 2004

We have isolated two bacterial strains, FM-02 and AL-02, which produced EPS from forest soil for the restoration of forest fire by promoting soil aggregation. FM-02 was found to be Gram negative rod and belong to Beta Proteobacterium sp. through 16s-rDNA sequence analysis, and AL-02 was Gram positive rod and showed 81% of similarity to Zoogloea sp. through the analysis of 16s-rDNA sequence. FM-02 and AL-02 produced about 1.8g and 8.3g of EPS, respectively, per 1L of culture as dry weight. Flocculation activity (FA) was also measured in two strains. FM-02 showed 2.31 FA against active carbon, and AL-02 showed 6.21 FA against kaolin clay. From these results, we expect that AL-02 strain will be applied as a good biological material for the reduction of forest soil erosion by wild and rain after fire through promoting coagulation of soil particles.

• Elastomers and Composites
• /
• v.41 no.1
• /
• pp.27-39
• /
• 2006

In this study, modified DA-MMT filled NR/DA-MMT nanocomposites were manufactured by a latex method and a compounding method. Cure characteristics and mechanical properties of the Cloisite 15A, carbon black, Na-MMT filled NR compounds and the DA-MMT filled NR compound by a latex method were also evaluated. The filler content of all compounds was 10phr except the carbon black filled compound. Degree of intercalation and dispersion was characterized by X-ray diffraction (XRD) and transmission electron microscope (TEM). According to the XRD diffraction pattern and TEM analysis, extensive intercalation and homogeneous dispersion of the clay were obtained after the two-roll milling. Although the layer distance was increased, some parts of DA-MMT showed the layer distance of Na-MMT after vulcanization. DA-MMT filled NR compounds showed the highest ODR torques, tensile strength, modulus, and tear energy. The NR/DA-MMT nanocomposite (by a latex method) compared with a NR/DA-MMT nanocomposite (by a compounding method) was found that the improvement of the mechanical properties was mainly due to the degree of dispersion of the clay.

• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.572-577
• /
• 2006

The physiochemical interactions of 1-methylcyclopropene (1-MCP) and adsorbing agents can be described using a very powerful tool, inverse gas chromatography (IGC). Sorption behavior of 1-MCP on various adsorbing agents was assessed using the profile peaks of 1-MCP at an infinite dilution concentration using the IGC technique. Chromatogram peaks of 1-MCP adsorption were not observed for the adsorbing agent activated carbon. The forms of sorption isotherms followed Henry's law, and behaved according to the binding site theory. Specific retention volume and distribution coefficients for 1-MCP on the adsorbing agents were determined at 50, 60, 70, and $80^{\circ}C$, respectively. Silica gel had a much higher number of binding sites for 1-MCP compared to Tenax-TA and activated clay agents. Meanwhile, activated carbon proved to be a very strong binding agent for 1-MCP based on 1-MCP efficiency experiments on the selected adsorbing agents. However, as a proper means of delivering 1-MCP molecules to fresh food products, activated carbon is not fit for the binding and release of 1-MCP gas under dry or high humidity conditions because activated carbon has a strong affinity for 1-MCP, even when treated with distilled water.