• Korea-Australia Rheology Journal
• /
• v.20 no.4
• /
• pp.235-243
• /
• 2008

The aim of this study is to explore the possibility of incorporating supercritical carbon dioxide ($scCO_2$) into twin screw extrusion process for the production of polypropylene-clay nanocomposite (PPCN). The $CO_2$ is used as a reversible plasticizer which is expected to rapidly transport polymeric chains into the galleries of clay layers in its supercritical condition inside the extruder barrel and to expand the gallery spacings in its sub-critical state upon emerging from die. The structure and properties of the resulting PPCNs are characterized using wide-angle X-ray diffraction (WAXD), transmission electron microscopy (TEM), rheometry, thermogravimetry and mechanical testing. In the processing of the PPCNs with $scCO_2$, optimum $scCO_2$ concentration and screw speed which maximized the degree of intercalation of clay layers were observed. The WAXD result reveals that the PP/PP-g-MA/clay system treated with $scCO_2$ has more exfoliated structure than that without $scCO_2$ treatment, which is supported by TEM result. $scCO_2$ processing enhanced the thermal stability of PPCN hybrids. From the measurement of linear viscoelastic property, a solid-like behavior at low frequency was observed for the PPCNs with high concentration of PP-g-MA. The use of $scCO_2$ generally increased Young's modulus and tensile strength of PPCN hybrids.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.465-470
• /
• 2006

Siloxanes are widely used in industrial processes and consumer products. When landfill gas is used as fuel for gas engines, volatile siloxane in landfill gas causes serious damage to gas engines and pretreatment facilities. In this study, the applicability of various clay minerals was evaluated as the alternative adsorbents of activated carbon. SEM and BET analyses of illite, vermiculite, and activated carbon were performed for comparing those physical properties. Siloxane adsorption capacities of illite and vermiculite were estimated very high to 1.7 g/g illite, 3.8 g/g vermiculite respectively through the adsorption experiments of D5 siloxane.

• Korean Chemical Engineering Research
• /
• v.60 no.3
• /
• pp.377-385
• /
• 2022

Surface morphology and adsorption characteristics of charcoals prepared from Korean traditional kiln were analyzed, and their moisture adsorption capacities were examined with respect to humidity and temperature change. Moisture adsorption capacities of red-clay powder, activated carbon fiber fabric (ACF fabric) and activated carbon fiber paper(ACF paper) were also examined to compare with those of charcoals. Moisture adsorption capacity of charcoal was low less than 45% humidity due to its hydrophobic property, but it slowly and linearly increased as increasing the humidity. Moisture adsorption capacity of red-clay powder was similar to charcoal at low level humidity, it increased exponentially as increasing the humidity showing Type V adsorption isotherm. Therefore, the weather forecast annal prepared by employee of weather centre in Joseon Dynasty is experimentally approved. ACF fabric and ACF paper show excellent moisture adsorption capacities, which can be used to humidity measuring sensor. Adsorption isotherm of charcoal slice was peculear showing the mixed Type I and Type IV due to low-pressure hysteresis that was occurred from embedment of nitrogen in crevice of charcoal. The specific surface area of charcoal increased by grinding charcoal slice to powder, resulted in increasing the desorption amount of adsorbent at low relative pressure.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.1
• /
• pp.35-40
• /
• 2011

Magnesia-carbon brick is used to refractory material in Converter and/or Ladle furnace for molten steel manufacturing. The rapid growth of steel making industry, molten steel industry is increased. Therefore, growth of molten steel industry lead to make waste magnesia-carbon brick by repair of Converter and/or Ladle furnace. These waste magnesia-carbon brick is abandoned all. Besides, as it is loosely composed of silt and clay including sand falling according to the type of gangue, rainwater inflows and outflows relatively easily, but silt or clay particles absorb water for a long period, weakening ground. This study tried to show that when colluvial soil is solidified using waste magnesia-carbon brick powder as a way to solidify strengthen the rigidity of colluvial soil.

• Preventive Nutrition and Food Science
• /
• v.3 no.4
• /
• pp.374-378
• /
• 1998

The objectives of this study are to determine the optimum process conditions of Korean beeswax and discuss the parameter of adsorption . Purification conditions, such as time, temperature and the type of adsorbents were investigated using the relationship between the properties of refined products and process conditions and theiptimum bleaching condition of Korean beeswax were determined for the first time. The various bleaching conditions were examined by observing the result of Lovibond color, photometric color, methods provided by the American Oil Chemists '(A.O.C.S).The iptimum bleaching temperature was 8$0^{\circ}C$ and the bleaching agents (5% of the weight of beeswax) which consisted of activated clay and activated carbon and a vacuum system were also necessary.

• Applied Chemistry for Engineering
• /
• v.20 no.5
• /
• pp.493-499
• /
• 2009

The properties of polystyrene and styrenic copolymer nanocomposites containing carbon nanotubes (CNT) and nanoclays were studied. Polystyrene and styrenic copolymer containing styrene and vinylbenzyl trimethylammonium chloride (SVTAC) were synthesized by emulsion polymerization. Polystyrene/CNT/clay and SVTAC/CNT/clay nanocomposites with various concentrations of CNT and different types of clay were prepared via mixing of polystyrene emulsion and clay. SVTAC/CNT nanocomposites showed a better electrical conductivity than PS/CNT nanocomposites. Nanocomposites with more surfactant during polymerization showed a better electrical conductivity than the ones with less surfactant. These indicated the positive effect of comonomer and surfactant on the electrical conductivity. Transmission electron microscopy (TEM) was used to analyze the state of CNT dispersion. TEM results showed that CNT loading, comonomer composition and amount of surfactant affected the final dispersion of CNT in nanocomposites. In order to confirm the effects of CNT loading, comonomer composition and the amount of surfactant on the thermal and dynamic mechanical properties, DSC and DMA analyses were conducted.

• Journal of Environmental Science International
• /
• v.12 no.11
• /
• pp.1173-1179
• /
• 2003

Laboratory sorption isotherm batch studies have been attempted to elucidate interaction of synthetic pyrethroids (bifenthrin and permethrin) with sediments and their fractions. As a nonlinear isothermal model, the Freundlich equation was applied to sorption results obtained from sediments to investigate the relationship between synthetic pyrethroids and sediments containing different amounts of organic carbon. Results demonstrated that the sorption capabilities of bifenthrin and cis- and trans-permethrin was in the order of bifenthrin, cis-permethrin and trans-permethrin, respectively, indicating that adsorbed bifenthrin was the most stable followed by cis- and trans-permethrin in all sediments. Their sorption capability was closely related to organic carbon contents in sediments. Higher sorption was observed in sediments containing higher organic carbon contents. Sorption study extended into the fractions, clay and humic acids, extracted from a sediment, indicated that higher sorption capacity in humic acids occurred than in the clay of both examined bifenthrin and permethrin. This study demonstrates the sorption of synthetic pyrethroids with sediments, and will help in the understanding of the transport and fate of synthetic pyrethroids existing in field sediments.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.112-118
• /
• 2005

Influence of a silane coupling agent on the reatraction behaviors of NR vulcanizates reinforced with carbon black and c lay was studied. Bis-(3-(triethoxysilyl)-propyl )-tetrasulfide (TESPT) was used as a silane coupling agent. The vulcanizates containing the silane coupling agent were, on the whole, recovered faster than those without the silane coupling agent. However, for the vulcanizate with the higher clay content at low temperature region (below $-12^{\circ}C$), the vulcanizate containing the silane coupling agent was recovered slower than that without the silane coupling agent. The recovery difference of the vulcanizates with and without silane coupling agent decreased with increase of clay content. The experimental results were explained with crosslink density, modulus, and bound rubber content.

• Journal of Conservation Science
• /
• v.37 no.2
• /
• pp.77-89
• /
• 2021

In this study, materials and color formation techniques were assessed for black potteries excavated from the Janghyeon-dong, Jungsan-dong and Gyodong-ri sites during the Proto-Three Kingdoms period in Ulsan, Korea. Although the black potteries were black superficially, the inner cores were either black or reddish yellow. Microscopy analysis identified that body clay was used for reddish iron oxide rich soils with quartz, alkali feldspar and mica, along with grains of myrmechite texture. Additionally, as marginal differences exist in the contents of SiO₂, Fe₂O₃ and CaO, the composition of the host rock and clay distributed around the sites was affected. Thus, we can deduce that pottery was made by soiling at a short distance. Raman spectroscopy results revealed that the black layer of the black pottery was used as amorphous combustion carbon. In addition, as a transparent layer of brown lacquer was observed on the substrate that was in contact with the surface layer, the black layer of the pottery induced black color development by a combination of combustion carbon and lacquer. Based on the mineral composition and microtexture of the body clay, the firing temperature of the potteries seemed to range from 750 to 850℃, whereas the lacquer layer was pyrolyzed at 468℃ by thermal analysis. Therefore, a combined layer of combustion carbon and lacquer, which formed the black color, was painted after the body clay was fired.

• Economic and Environmental Geology
• /
• v.54 no.1
• /
• pp.151-160
• /
• 2021

2:1 clay minerals such as smectite incorporating ammonium were extracted to investigate the ammonium behavior and nitrogen isotope characteristics for two different sediment cores which were collected from shimmering sites on seafloor of the Wakamiko crater, southwestern Japan. Inorganic nitrogen contents in clay fraction were estimated by calibration curve based on consistently decreasing carbon and nitrogen ratio during the treatment to decompose organic materials, after removing inorganic carbon. The results show that the proportions of inorganic nitrogen for total nitrogen in clay fraction of SWS site(Core#1094MR: av. 18.2%) are higher than those in SES site(Core#1093MG: av. 11.5%). Relatively good crystallinity of the former suggests that exchangeable ammonium was transformed to non-exchangeable ammonium during more evolving diagenetic process. Nitrogen isotope variance of clay fraction(SES site: Core#1093MG: -4.4 ~ +0.2 ‰, av. -2.4 ‰; SWS site: Core#1094MR: -0.7 ~ +3.0 ‰, av. +1.5 ‰) during sequential decomposition of exchangeable ammonium suggests that heat flow derived from deep magma led to nitrogen isotope fractionation between dissolved ammonium and ammonia in the fluids involved in the formation of 2:1 clay mineral incorporating ammonium with local temperature variation.