• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.1
• /
• pp.17-26
• /
• 1998

Cladding of stainless steel on mild steel was prepared by diffusion bonding process. The bond strength increased with an increase of bonding temperature and time. It was also found that the bond strength increased as the surface roughness decreased. After the diffusion bonding of stainless steel-mild steel, the mild steel part near the bonded interface showed higher strength than the base steel due to the migration of chromium and nickel from stainless steel to mild steel. Carbon migration from mild steel gave effect on the formation of chromium carbides at grain boundaries of stainless steel, the fractograpohic features of the imperfectly bonded interface showed rather coarse dimples in the mild steel part and very fine dimples in the stainless steel part.

• Proceeding of EDISON Challenge
• /
• 2013.04a
• /
• pp.111-124
• /
• 2013

Jianbo Wang의 그룹에서 최근 발표한 무촉매 분자 내 탄소-탄소 결합 형성 반응의 메커니즘을 계산 화학적으로 평가한다. 이 반응은 금속 촉매를 사용하지 않는다는 점과 Bio activity 를 갖는 Hydroxy-substituted Polycyclic Aromatic Compound (PAC)를 손쉽게 합성할 수 있다는 점에서 중요하다. Diazo moiety를 갖는 분자의 반응이 일반적으로 진행할 수 있는 세 가지 반응 경로가 제시되었고, DFT functional을 이용해 중간체 및 전이 상태에 대한 최적화 구조 및 에너지를 얻었다. 탄소-탄소 결합의 원천을 탐구하기 위해 Natural bond orbital charge calculation과 치환기 효과에 대한 계산이 수행되었다. 계산 결과, 중간체로 Triplet carbene을 형성하는 경로가 가장 불안정한 중간체를 형성했고, Tosylate가 해리되기 전 탄소-탄소 결합이 형성되는 경로가 가장 합리적인 반응경로임을 알 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.7
• /
• pp.576-581
• /
• 1994

The secondary deuterium kinetic isotope effects (SDKIE) involving deuterated aniline nucleophiles are reported for the reactions of benzyl bromides and chlorides and benzoyl chlorides in acetonitrile. The benzyl systems behave normally as to the trend of changes in SDKIE with the magnitude of ${\rho}X({\rho}_{nuc})$, whereas benzoyl system shows ananomaly; ${\mid}{\rho}_X{\mid}$ decreases with increase in the extent of bond making estimated by the SDKIE. This has been ascribed to the negative charge accumulation at the reaction center carbon in the transition state. The magnitude of ${\rho}_{XY}$ is found to decrease by ca. 0.03 with ten degree rise in the reaction temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.91-92
• /
• 2021

In the present work, we simulated and explained the bonding of three alkanethiols - hexanethiol (HT), decanethiol (DT), and 11-mercaptoundecanoic acid (MDA) - with Fe(110) surface and Fe2 clusters using Density Functional Theory (DFT) to probe the corrosion inhibition mechanisms. The interaction energies computed from periodic DFT calculations successfully predicted the experimental inhibition performance. We have found strong covalent bond formation between S(thiol) and Fe-atoms in both approaches, further confirmed by the projected density of states and electron density difference. Besides, natural bond orbital (NBO) charge distribution showed that DT had stronger electron-donation and back-donation synergic interactions with Fe-atoms.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1527-1530
• /
• 2002

1,12-diazacyclodocosane-2,11-dione was first isolated from a plant Phyllanthus niruri Linn. Its structure has been determined by means of spectroscopy methods and X-ray crystallography. Two peptide groups in the big ring (lactam) are the main factors influencing intermolecular contacts. The hydrogen-bond interaction of these hydrophilic groups is observed in the crystal structure. Meanwhile, C-H···O hydrogen bonds in molecules contribute to the formation of the whole crystal. These two kinds of hydrogen-bond form six- member rings among molecules. This compound crystallizes in the triclinic space group P-1 with a= 9.588(1) $\AA$, b= $9.850(1)\AA$, c = $11.810(1)\AA$, $\alpha=$ 68.18(1)$^{\circ}C$ , $\beta=$ 84.98(1), $\gamma$ = 86.03(1)$^{\circ}C$ , V = $1030.66(17)\AA3$ , Z = 2. A disorder of five-member carbon chain in the whole ring is observed in the title compound. The bond angle 105.8(4) is determined for a extreme configuration C(14)-C(15)-C(16), and 117.7(10) for another extreme configuration C(14')-C(15')-C(16'). In this crystal, two molecules are tied each other by short intermolecular hydrogen bonds, the oxygen atom being tied by hydrogen bond to nitrogen atom of another two molecules. The NMR and IR spectral data coincides to the structure of the compound.

• Bulletin of the Korean Chemical Society
• /
• v.1 no.3
• /
• pp.109-112
• /
• 1980

Ultraviolet spectrophotometric investigations were carried out on monoalkylbenzene-iodine systems in carbon tetrachloride. The results reveal the formation of one-to-one molecular complexes. On the basis of the equilibrium constants for these complexes of representative monosubstituted benzenes, the following order of increasing stability is obtained: i-propyl- ${\Delta}$H, ${\Delta}$G and ${\Delta}$S for the interaction of a number of monoalkyl substituted benzenes with iodine have been determined. In general, it can be said that as ${\Delta}$H becomes increasingly negative, corresponding decreases in the ${\Delta}$G and the ${\Delta}$S values are observed, and these variations are linear. The thermodynamic constants become increasingly negative with increasing monoalkyl substitution of the aromatic donor nucleus. The complex bond is therefore weak, and its formation is accompanied by relatively small entropy changes. Thus, analysis of these findings is discussed.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.387-392
• /
• 2018

Various technical approaches and concepts have been proposed to develop conductive super-hydrophobic (SH) surfaces. However, most of these approaches are not usable in practical applications because of insufficient adhesion and cost issues. Additionally, durability and uniformity issues are still in need of improvement. The goal of this research is to produce a large-area conductive SH surface with improved adhesion performance and uniformity. To this end, carbon nanotubes (CNT) with a high aspect ratio and elastomeric polymer were utilized as a conductive filler and matrix, respectively, to form a coating layer. Additionally, nanoscale silica particles were utilized for stable implementation of the conductive SH surface. To improve the adhesion properties between the SH coating layer and substrate, pretreatment of the substrate was conducted by utilizing both wet and dry etching processes to create specific organic functional groups on the substrate. Following pretreatment of the surface, a zirco-aluminate coupling agent was utilized to enhance adhesion properties between the substrate and the SH coating layer. Raman spectroscopy revealed that adhesion was greatly improved by the formation of a chemical bond between the substrate and the SH coating layer at an optimal coupling agent concentration. The developed conductive SH coating attained a high electromagnetic interference (EMI) shielding effectiveness, which is advantageous in self-cleaning EMI shielding applications.

• The Korean Journal of Zoology
• /
• v.13 no.3
• /
• pp.75-84
• /
• 1970

Gamma-radiolyses of oxygenated and deoxygenated glycylglycylclycine in aqueous solution and in the solid state are observed, with special regards to peptied bond rupture for elucidation of radiolytic mechanism of proteins, by means of chromatorgraphic separation of degradation products, spectrophotometric quantitation of carbonyl compounds, micro-titration of amide formation, infrared spectrophptometry, and ultraviolet spectrophotometry for evaluation of radiation damage. Essential difference of peptide bond rupture is observed in solution and in the solid state, being high in the former and negligible in the latter. On the other hand, the presence of and obsence of oxygen in solution during irradiation are not so significant with respect to peptide bond rupture, except the recombination of free-radicals produced in deoxygenated solution. Peptide bond rupture in solution is attributable to the mechanisms proposed by Garrison et al.; dehydrogenation followed by hydrolysis to yield acid amide and carbonyl function as found on the basis of radiolytic products. Peptide bond attack at $\\alpha$-carbon locus might be suggestive for irradiated solid but not significant in view of low degree of peptide bond rupture.

• Journal of the Korean Chemical Society
• /
• v.23 no.6
• /
• pp.368-373
• /
• 1979

Kinetic studies have been carried out on solvolyses and halide exchanges $(Cl^-,\;Br^-,\;I^-)$ of N,N-dimethyl-, N,N-diethylcarbamoyl chlorides, and solvolyses of N,N-diphenylcarbamoyl chloride. Kinetic results together with simple MO analysis indicated that: (a) N,N-dialkylcarbamoyl chlorides reacted via the $S_N2$ mechanism, while N,N-diphenylcarbamoylchloride reacted via the $S_N1$ mechanism; (b) in chloride exchanges, the bond-breaking appeared to be important, whereas in bromide and iodide exchanges, the bond-formation was shown to be important.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.362-363
• /
• 2003

Photochemical ozone is formed from nitrogen oxides (NOx) and volatile organic compounds(VOCs) through non-linear interactions between chemical reactions and meteorology, and the relationship between precursors and photochemical ozone will be changed to match the emission distribution and meteorological fields. It is generally known that for some conditions the process of ozone formation is controlled almost entirely by NOx and is largely independent of VOC, while for other conditions ozone production increases with increasing VOC and does not increase(or sometimes even decreases) with increasing NOx (omitted)