• Microbiology and Biotechnology Letters
• /
• v.24 no.3
• /
• pp.376-379
• /
• 1996

Cane molasses, the most widely used carbon source for the industrial fermentation of L-lysine, usually contains a high concentration of calcium ions which tend to cause scaling problem in the recovery process. To remove the calcium ions, cane molasses was pretrea ted with sulfuric acid by adjusting the pH to 2.5-3.5. When the pretreated solution was directly heat-sterilized and used in the fermentation, a significant reduction in L-lysine production was observed. In this paper, we proved that sucrose is a superior substrate for L-lysine fermentation to that of glucose or fructose and that the above-mentioned decrease of L-lysine production was caused by the hydrolysis of sucrose in the molasses when the molasses was heat-sterilized at a low pH. The problem was overcome by adjusting the pH of molasses to neutral before sterilization.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.10a
• /
• pp.131-131
• /
• 2003

• Journal of Korean Society on Water Environment
• /
• v.23 no.5
• /
• pp.781-788
• /
• 2007

The Carbon source to enhance the denitrification is essential matter in the advanced sewage treatment. For the high level of nutrient removal, external carbons such as ethanol, methanol, volatile fatty acids and so on should be needed. In this study, the methods to increase the sludge solubilization and acidification rate were compared with waste activated sludges and food waste leachate. Ultrasonication and acids were used for the pretreatment of organic particles in sludges. As a results, the optimal temperature and HRT were $60^{\circ}C$ and 5 days, respectively. HAc, HPr, HBr, and other VFAs for acid fermentations reduced up to 22, 16, 14, and 48% with HRT reduction. For the increase of solubilization, 28% of solids destruction rate was shown at 0.3 watts/mL.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.4
• /
• pp.637-643
• /
• 2006

The bench-scale chlorine exposure study was performed to investigate the effect of pretreatment by free chlorine and monochloramine ($NH_2Cl$) on the performance of RO membranes made of polyamide (PA). Feed monochloramination at 2mg/L did not cause significant productivity loss compared to free chlorine. However, metal coagulants reacted with monochloramine, the PA membrane suffered from a gradual loss of membrane integrity by chlorine oxidation, which was characterized as a decrease in salt rejection. Especially, RO membranes exposed to alum coagulants with monochloramine revealed the salt rejection lower than those exposed to iron coagulants. XPS membrane surface analysis demonstrated that the chlorine uptake on the membrane surface increased and carbon peaks were shifted significantly when exposed to alum coagulants with monochloramine.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.92-102
• /
• 1996

In this research, to develope the A1 7075/CFRP multilayered hybrid composites, CRALL(Carbon Reinforced aluminum lamiate) specimens were processed by autoclavecuring system that curing temperature, time, surface pretreatment condition of aluminum were constant. Andthe fatigye life and failure mechanism on CFRP volume fraction and fiber orientation of CRALLspecimens were investigated. A fatigue life was greatly influenced by effect of CFRP fiber volume fraction but it was less effected than those of fiber orientation. The fatigue failure arised from interface delamination of CFRP and aluminum sheet after shear fracture of aluminum layer. The failure mechanism is assumed that the aluminum laminates which divide the CFRP into many thim layers tend to arrest the failure propagation.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.3
• /
• pp.103-109
• /
• 1997

As the quality of raw water deteriorates, a number of additional treatment techniques have been developed and adapted to water treatment for producing a safe and aesthetically satisfactory drinking water. So, BACFB process as pretreatment in water supply is to be effective to remove dissolved organics. This study performed to find out the effects of HRT and hydraulic characteristics on BACFB reactors in water supply. The flow type in reactor was a high dispersion with complete mixing. As superficial velocity was increased, bed expansion was closed to theoretical values. It was considered that below 30 min HRT could operated to ensure the removal of dissolved organics.

• Toxicological Research
• /
• v.4 no.2
• /
• pp.107-115
• /
• 1988

The effects of altering the hepatic mixed-function oxidase(MFO) activities on the acute toxicity of parathion were examined in female rats. Phenobarbital sodium pretreatment (50mg/kg/day, i.p.) for 4 consecutive days has resulted in significant decreases in the toxicity of parathion (2 or 4 mg/kg, i.p.) as determined by lethality and cholinesterase activities wheras the toxicity arising from a single dose of CCl4(2 mmol/kg, i.p.) 24 hr prior to parathion challenge was potentiated.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.535-538
• /
• 1995

This study employs the variety of mixtures of XAD resin and active carbons as concentration base for solid phase extraction (SPE) which has been widely used to preconcentrate and purify phenol and chlorophenols in determination of environmental water samples. In this study, we employed variety of mixtures of copolymer based XAD-4 resin with active carbons. This cartridges shows advantages of both materials, such as better affinity to phenol by active carbon and better mechanical stabilities from XAD resin. The better enrichment factor, pretreatment time, recoveries and limit of detection (LOD) were achieved by the attempts to pack precolumns with both meterials for preconcentration.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.515-521
• /
• 2004

The catalytic oxidation of volatile organic compounds (methanol. acetaldehyde) has been characterized using the copper phthalocyanine catalyst in a fixed bed flow reactor under atmospheric pressure. The catalytic activity for pretreatment conditions was examined by this reaction system. The catalytic activity was ordered as follows: metal free-PC＜Cu ($\alpha$)-PC＜Cu ($\beta$)-PC The formaldehyde, carbon monoxide as a partial oxidation product of methanol and acetaldehyde over Cu ($\alpha$)-PC catalyst were detected and the conversions of methanol and acetaldehyde were accomplished above 95% over Cu ($\alpha$) -PC, Cu ($\beta$) - PC catalyst at 35$0^{\circ}C$. The pretreated metal free -PC, Cu($\alpha$)-PC, Cu($\beta$)-PC catalysts have been characterised by TGA, EA and XRD analysis. The catalytic activity pretreated with air and $CH_3$OH mixture (P-4) or air only (P-5) was very excellent. XRD and EA results showed that Cu($\alpha$)-PC, Cu($\beta$)-PC were destroyed an(1 new metal oxide such as CuO were formed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.340-347
• /
• 2008

Dissolution process of serpentine in distilled water was systematically investigated for study on pre-treatment of serpentine which was a candidate material for carbon dioxide sequestration. The metallic ions(Ca, Si, Mg etc.) were dissolved in distilled water at ambient condition and their concentrations were changed with dissolution time. The precise evaluation of dissolution process for serpentine dissolved solvent was performed by ion conductivity and pH measurement. Serpentine dissolution in distilled water was evaluated as a stable pre-treatment process without changes of crystallographic structure and chemical structure changes.