• 한국결정성장학회지
• /
• 제27권5호
• /
• pp.249-255
• /
• 2017

화력발전소에서 발생되는 매립회의 지오폴리머 원료화를 위하여 자력선별 공정을 이용하여 자성체와 비자성체로 분리하였으며, 매립회의 입도 및 자석의 세기에 따른 미연탄소의 선별 특성을 관찰하였다. 3000 G 자석을 이용한 세립(0.15~0.84 mm)과 조립(0.84~2.4 mm) 매립회의 자력선별 결과, 매립회는 입도에 상관없이 비자성체의 무게분율과 강열감량이 자성체보다 높게 나타났으며, 세립 매립회의 경우 자석의 세기를 3000 G에서 10000 G로 증가시키면, 약한 자성을 띠는 물질들도 자성체로 분리됨에 따라 자성체의 무게 분율이 급격히 증가되면서 낮은 강열감량에도 불구하고 전체 강열감량의 32.6 wt%의 66.9 %(22.8 wt%)를 차지하였다. 자력 선별된 조립 매립회로 제조된 지오폴리머의 재령일별 압축강도 측정결과, 미연탄이 적게 포함된 자성체로 제조된 지오폴리머의 압축강도가 20 MPa를 나타내었다.

• 공업화학
• /
• 제24권6호
• /
• pp.668-671
• /
• 2013

본 연구에서는 정수기용 필터로 사용되는 활성탄 블록을 압출 방법으로 제조할 경우 활성탄 블록의 비표면적에 영향을 미치는 고분자 바인더의 특성에 관하여 고찰하였다. 고분자 바인더로 사용되는 Polyethylene의 입자 크기를 변화하여 그에 따른 활성탄 블록의 비표면적의 변화 및 수용액상에서 염소 이온의 흡착 특성을 연구하였다. FE-SEM을 이용하여 PE의 입자 크기 및 입자의 모양을 분석하였으며, 질소 흡 탈착을 이용하여 활성탄 및 활성탄 블록의 비표면적을 측정하였다. 비표면적 측정결과 원료 활성탄은 $1186(m^2/g)$, PE 바인더의 입자크기가 $200{\mu}m$일 때 $444(m^2/g)$, $20{\mu}m$일때 $940(m^2/g)$로 측정되었으며, 필터 성능을 확인하기 위하여 염소 흡착 실험을 실시하여 정수 성능을 평가하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.81-85
• /
• 2007

A fluidized bed reactor is made with quartz. The size of FBR is 0.055 m I.D. and 1.0 m in height. The FBR was employed for the thermocatalytic decomposition of propane to produce hydrogen without $CO_{2}$. The fluidized bed was proposed for the continuous withdraw of product carbons from the reactor. Carbon black DCC-N330 is used to decompose the propane gas. The propane decomposition reaction over carbon black catalyst in a fluidized bed reactor was carried out the temperature range of 600 ${\sim}$ 800 $^{\circ}C$, propane gas velocity of 1.0 ${\sim}$ 4.0$U_{mf}$($1U_{mf}$ = 0.61cm/s) and the catalyst loading of 100 ${\sim}$ 200g. Production of $H_{2}$ such as other reaction temperature, gas velocity, catalytic loading on the reaction rates was investigated. The carbon depositied on the catalyst surface was observed by FE-SEM. The particle size of the carbon black was observed by Particle size analyzer. Resulting production in the experiment was not only hydrogen but also several by-products such as methane, ethylene, ethane, and propylene.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.336-337
• /
• 2005

This study shows the effect of addition of $LiCoO_2$, with different milling time ranging from 0, 30, 200 hours, to the activated carbon electrode. Test cells consisting of activated carbon (100-X%) and $LiCoO_2$ (X%)were made (where X=10, 20, and 40). Test cells with varying concentrations of $LiCoO_2$ which differ in the milling time showed improved specific capacity compare with the cells fabricated using activated carbon alone. The enhanced capacity may be caused due to the addition of $LiCoO_2$ powders at varying concentration. An improved ESR value obtained may be caused by the smaller particle size of $LiCoO_2$. It was concluded that finer the particle size higher will be the efficiency.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.41-45
• /
• 2006

The study on laser-ablation plasmas has been strongly interested in fundamental aspects of laser-solid interaction and consequent plasma generation. In particular, this plasma has been widely used for the deposition of thin solid films and applied to the semiconductors and insulators. In this paper, we developed and discussed the generation of carbon ablation plasmas emitted by laser radiation on a solid target, graphite. The progress of carbon plasmas by laser-ablation was simulated using Monte-Carlo particle model under the pressures of vacuum, 1 Pa, 10 Pa and 66 Pa. At the results, carbon particles with low energy were deposited on the substrate as the pressure becomes higher. However, there was no difference of deposition distributions of carbon particles on the substrate regardless of the pressure.

• Asian Journal of Atmospheric Environment
• /
• 제7권2호
• /
• pp.120-128
• /
• 2013

The concentration and composition of particulate matter (PM) in the atmosphere can directly reflect the environmental pollution. The atmospheric pollution in some Cameroonian cities is increasing with the industrial development and urbanization. Air pollution is inherently complex, containing PM of varied size and composition. This PM exists as a dynamic cloud interacting with sunlight and is modified by the meteorology. The reflectometer and the EDXRF spectrometry are applied to determine the concentration of some specific elements at four sites in the city of Yaound$\acute{e}$. The particular aim of the present work is to put in place data base on air pollution in urban area and elaborate regulations on the emissions issued to industrial and vehicle activities. This study provides an overview of the concentration of black carbon and some specific elements in the air, which have impacts on human health. The measurement was done by distinguishing the size of particle. So that, the particle with aerodynamic diameter between $2.5-10{\mu}m$ (so-called coarse particle) and aerodynamic diameter < $2.5{\mu}m$ (so-called fine particle) were considered to obtain more information about levels of the inhalable fraction of the location. The results obtained in four locations of the city of Yaound$\acute{e}$ show that the black carbon concentration is very considerable, the element sulfur is a major pollutant and the concentration of fine particle is very greater. The results obtained of fine and coarse filters range from $5-17{\mu}g/m^3$ and $10-18{\mu}g/m^3$ for the black carbon. S, Cu, Zn, Pb, Cd, As, Se and Hg are the specific findings of this work. The pollutants with a greater concentration are S, Pb, and Zn. These later seem to be non-uniformly, non-regular in some location and high compared to other countries. This work allows us to make a potential relation between pollutants and emission sources. In this framework, some suggestions have been proposed to reduce emissions for an improvement of the air quality in the environment and thus, the one of the city of Yaound$\acute{e}$.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.963-969
• /
• 2014

본 연구는 고회분탄의 최적화된 연소 조건을 알아보기 위해 회분 함량이 각기 다른 네 종류 석탄의 연소시 배출되는 NOx및 미연분 특성을 알아보았다. 실험은 DTF(Drop Tube Furnace)를 통해서 다양한 입자크기조건 및 공기다단방식을 도입하여 수행하였다. 결과로 회분의 함량이 증가할수록 미연분이 증가하며, 입자크기가 증대될수록 미연분에 대한 회분의 영향이 명확해짐을 확인하였다. 또한, 회분의 함량이 증가할수록 Char-NOx가 감소하며, 입자크기가 감소할수록 NOx의 배출이 감소하는 것을 확인하였다. 본 연구는 고회분탄의 NOx를 저감하는 방법으로 공기다단방식의 적용을 제안하며 전단 연소 영역의 공기과잉률 변화를 통한 최적화된 연소조건을 제시하였다.

• 한국의학물리학회지:의학물리
• /
• 제33권4호
• /
• pp.114-120
• /
• 2022

Purpose: Particle beam therapy is advantageous over photon therapy. However, adequately delivering therapeutic doses to tumors near critical organs is difficult. Nanoparticle-aided radiation therapy can be used to alleviate this problem, wherein nanoparticles can passively accumulate at higher concentrations in the tumor tissue compared to the surrounding normal tissue. In this study, we investigate the dose enhancement effect due to gold nanoparticle (GNP) when Carbon-12, He-4, and proton beams are irradiated on GNP. Methods: First, monoenergetic Carbon-12 and He-4 ion beams of energy of 283.33 MeV/u and 150 MeV/u, respectively, and a proton beam of energy of 150 MeV were irradiated on a water phantom of dimensions 30 cm×30 cm×30 cm. Subsequently, the secondary-particle information generated near the Bragg peak was recorded in a phase-space (phsp) file. Second, the obtained phsp file was scaled down to a nanometer scale to irradiate GNP of diameter 50 nm located at the center of a 4 ㎛×4 ㎛×4 ㎛ water phantom. The dose enhancement ratio (DER) was calculated in intervals of 1 nm from the GNP surface. Results: The DER of GNP computed at 1 nm from the GNP surface was 4.70, 4.86, and 4.89 for Carbon-12, He-4, and proton beams, respectively; the DER decreased rapidly with increasing distance from the GNP surface. Conclusions: The results indicated that GNP can be used as radiosensitizers in particle beam therapy. Furthermore, the dose enhancement effect of the GNP absorbed by tumor cells can aid in delivering higher therapeutic doses.

• 해양환경안전학회지
• /
• 제26권7호
• /
• pp.858-863
• /
• 2020

본 연구에서는 활성탄소를 이용하여 해양환경으로 유출된 침강 HNS를 현장에서 대응하기 위한 기술 개발을 목적으로, 활용 가능한 활성탄소의 조건을 검토하고 예상 소요량을 산출하였다. 입자 크기별 7종의 활성탄소들을 대상으로 침강 속도를 측정하였고, 침강 HNS로 분류된 클로로포름(CHCl3)에 대한 흡착용량을 실험실 규모 실험(lab-scale test)으로 측정하였다. 또한 7종 활성탄소들에 대하여 유해물질함량과 용출 실험을 실시하여 용출된 유해물질 함량을 정량 분석하였다. 평균 침강속도(Mean particle-settling velocity)는 0.5~8 cm/sec의 범위로 8-20 mesh 경우를 제외하고 입자의 크기가 클수록 침강속도가 빨랐으며, 클로로포름에 대한 흡착효율은 대체로 입자가 작을수록 표면적이 넓어져 증가되었다. 또한 현장 투입 후 2차 오염가능성 확인을 위한 유해물질함량과 용출 실험 실험에서 >100 mesh의 활성탄소는 전함량분석결과가 아연(Zn)과 비소(As)가 수처리제기준보다 높고, 용출실험결과에서도 크롬(Cr), 아연(Zn), 비소(As)가 다른 활성탄소에 비해 높은 농도로 용출되었다. 흡착효율, 침강속도, 유해성분 용출량 등을 종합적으로 고려하여 현장 처리 적용 가능한 활성탄소는 20-60, 20-40, 2mm&down mesh 이었으며, 흡착용량을 최우선으로 판단하여 투입물량을 계산하면 최소 현장 투입 물량은 각각 0.82, 0.90, 1.28 ton/㎘ 이다.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.278-284
• /
• 2017

Generally, classifiers have been used as machines to crush raw materials and classify suitable particle sizes in all industrial fields, such as food, chemical, and mineral. However, the technique for classifying micron-sized particles between 5 and $20{\mu}m$ is inferior. In particular, numerous experiments and considerable experiences are required to predict the particle size, because the classifier particle size is determined according to the internal flow. However, it is quite difficult to set the driving conditions so that the desired particle size can be classified only by experience and experimentation. Therefore, this study proposes a method of predicting the average particle size by employing multiphase flow analysis and the Taguchi method; this method is subsequently verified.