• 한국구조물진단유지관리공학회 논문집
• /
• 제12권2호
• /
• pp.67-74
• /
• 2008

본 연구에서는 탄소섬유접착보강공법의 박리와 연관한 부착특성에 대하여 검토하였다. 그 결과를 요약하면, 온도변화에 따른 변형 특성에서는 바탕 콘크리트의 강도에 관계없이 온도 변화에 따라서 각 재료들의 변형 폭도 커지는 것을 알 수 있었다. 초음파 전파 속도도 온도변화에 따라 작아지는 것으로 나타나 계면에서 박리가 발생하였음을 알 수 있었다. 부착강도는 온도 변화가 클수록 부착강도의 값은 작아지는 것으로 나타났는데, 파괴형태는 계면파괴와 모재파괴 형태로 나타났다. 건습 변화에 따라서는 4사이클까지 각 재료의 변형 및 초음파 전파 속도에서 큰 변화를 나타내지 않아 건습 자체의 반복에는 큰 영향이 없는 것으로 판단된다. 단, 부착강도는 40%정도 저하하는 것으로 나타났지만 비교적 양호한 강도를 나타내었다. 동결융해 시험결과는 온도변화 요인과 유사한 경향으로서 동결융해 작용을 받을 경우 4사이클 이내에 박리가 일어날 수 있는 것으로 분석되었다.

• Steel and Composite Structures
• /
• 제20권2호
• /
• pp.413-429
• /
• 2016

A theoretical method to predict the interfacial stresses in the adhesive layer of reinforced concrete beams strengthened with externally bonded carbon fiber-reinforced polymer (CFRP) plate is presented. The analysis provides efficient calculations for both shear and normal interfacial stresses in reinforced concrete beams strengthened with composite plates, and accounts for various effects of Poisson's ratio and Young's modulus of adhesive. Such interfacial stresses play a fundamental role in the mechanics of plated beams, because they can produce a sudden and premature failure. The analysis is based on equilibrium and deformations compatibility approach developed by Tounsi. In the present theoretical analysis, the adherend shear deformations are taken into account by assuming a parabolic shear stress through the thickness of both the reinforced concrete beam and bonded plate. The paper is concluded with a summary and recommendations for the design of the strengthened beam.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.999-1022
• /
• 2016

The use of Carbon Fiber Reinforced Polymer (CFRP) to strengthen steel structures has attracted the attention of researchers greatly. Previous studies demonstrated bonding of CFRP plates to the steel sections has been a successful method to increase the mechanical properties. However, the main limitation to popular use of steel/CFRP strengthening system is the concern on durability of bonding between steel and CFRP in various environmental conditions. The paper evaluates the performance of I-section steel beams strengthened with pultruded CFRP plate on the bottom flange after exposure to diverse conditions including natural tropical climate, wet/dry cycles, plain water, salt water and acidic solution. Four-point bending tests were performed at specific intervals and the mechanical properties were compared to the control beam. Besides, the ductility of the strengthened beams and distribution of shear stress in adhesive layer were investigated thoroughly. The study found the adhesive layer was the critical part and the performance of the system related directly to its behavior. The highest strength degradation was observed for the beams immersed in salt water around 18% after 8 months exposure. Besides, the ductility of all strengthened beams increased after exposure. A theoretical procedure was employed to model the degradation of epoxy adhesive.

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.629-640
• /
• 2019

This paper presents a theoretical and finite element (FE) study on the stress intensity factors of double-edged cracked steel beams strengthened with carbon fiber reinforced polymer (CFRP) plates. By simplifying the tension flange of the steel beam using a steel plate in tension, the solutions obtained for the stress intensity factors of the double-edged cracked steel plate strengthened with CFRP plates were used to evaluate those of the steel beam specimens. The correction factor α₁ was modified based on the transformed section method, and an additional correction factor φ was introduced into the expressions. Three-dimensional FE modeling was conducted to calculate the stress intensity factors. Numerous combinations of the specimen geometry, crack length, CFRP thickness and Young's modulus, adhesive thickness and shear modulus were analyzed. The numerical results were used to investigate the variations in the stress intensity factor and the additional correction factor φ. The proposed expressions are a function of applied stress, crack length, the ratio between the crack length and half the width of the tension flange, the stiffness ratio between the CFRP plate and tension flange, adhesive shear modulus and thickness. Finally, the proposed expressions were verified by comparing the theoretical and numerical results.

• Structural Monitoring and Maintenance
• /
• 제6권1호
• /
• pp.47-66
• /
• 2019

One method of retrofitting concrete structures is to use fiber reinforced polymers (FRP). In this research, the shear, torsional and flexural strengthening of self-compacting reinforced concrete (RC) girders are fulfilled with glass fiber reinforced polymer (GFRP) and carbon fiber reinforced polymer (CFRP) materials. At first, for verification, the experimental results were compared with numerical modeling results obtained from ABAQUS software version 6.10. Then the reinforcing sheets were attached to concrete girders in one and two layers. Studying numerical results obtained from ABAQUS software showed that the girders stiffness decreased with the propagations of cracks in them, and then the extra stresses were tolerated by adhesive layers and GFRP and CFRP sheets, which resulted in increasing the bearing capacity of the studied girders. In fact, shear, torsion and bending strengths of the girders increased by reinforcing girders with adding GFRP and CFRP sheets. The samples including two layers of CFRP had the maximum efficiencies that were 90, 76 and 60 percent of improvement in shear, torsion and bending strengths, respectively. It is worth noting that the bearing capacity of concrete girders with adding one layer of CFRP was slightly higher than the ones having two layers of GFRP in all circumstances; therefore, despite the lower initial cost of GFRP, using CFRP can be more economical in some conditions.

• 콘크리트학회지
• /
• 제11권2호
• /
• pp.177-186
• /
• 1999

본 연구의 목적은 탄소섬유쉬트로 보강된 시험체의 주요 파괴모드인 계면모드인 계면박리 모드에 의한 부재의 파괴를 규명하는 것이다. 탄소섬유쉬트로 보강된 손상된 보시험체의 계면박리 모드를 해석하기 위하여 선형탄성 파괴역학(LEFM)의 컴플라이언스법과 유한요소법을 사용하여 계면파괴 역학변수인 에너지해방율(strain energy release rate, G)을 고찰하였다. 손상된 단순 보시험체의 해석결과, 최대 에너지해방율($G_{max}$)은 에폭시 접착두께에 관계없이 바깥 휨균열에서 시작된 계면 전단 균열 길이가 18mm 부근에서 발생하였다. 보강보의 강도 해석결과, 극한강도 설계법에 따른 단면의 공칭 휨 강도에 대한 계면박리에 의해 부재가 파괴되는 것으로 해석되었다. 또한 적용된 접착두께 1mm~3mm는 에너지해방율에 거의 영향을 미치지 않아 계면박리의 주요 인자가 아닌 것으로 나타났다.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.221-228
• /
• 2010

탄소섬유시트 보강공법은 열화 손상된 콘크리트 구조물의 보강에 가장 많이 사용되는 보강공법 중 하나이다. 탄소섬유시트 보강공법은 에폭시접착제를 사용하여 탄소섬유시트를 콘크리트의 외부에 부착하는 보강공법으로 탄소섬유시트에 의한 휨보강이 에폭시 접착 경계면을 통하여 콘크리트로 전달된다. 따라서 사용기간이 경과함에 따라 에폭시 접착 경계면에 발생하는 크리프 등의 시간의존적 거동은 보강효과를 감소시키는 요인이 된다. 본 연구에서는 경계면에서 발생하는 크리프 영향을 해석하기 위하여 콘크리트의 크리프 거동에 대한 기존의 연구들을 고찰하고, 이를 바탕으로 에폭시 접착 경계면의 크리프 영향을 예측할 수 있는 이론적인 연구를 수행하였다. 제안된 유한요소해석기법은 기존의 콘크리트 크리프 거동 분석을 위해 사용되던 유변모델을 에폭시 접착 경계면에 적용한 것으로 기존 실험결과와 비교를 통하여 타당성을 검증하였다. 또한, 제안된 유한요소해석을 통하여 탄소섬유시트로 보강된 콘크리트 구조물의 시간의존적 거동에 경계면 재료의 크리프 영향을 반드시 고려해야 한다는 것을 입증하였다.