• 제목/요약/키워드: Carbon fiber

검색결과 2,788건 처리시간 0.03초

CFRP판으로 프리스트레싱 보강한 RC 보의 휨거동에 관한 실험적 연구 (Experimental Study on Flexural Behavior of RC Beams Strengthened with Prestressed CFRP Plate)

  • 한상훈;홍기남;김형진;우상균
    • 대한토목학회논문집
    • /
    • 제26권2A호
    • /
    • pp.301-310
    • /
    • 2006
  • 탄소섬유보강재(CFRP)는 부식에 대한 저항성과 작은 중량에도 불구하고 높은 강도와 강성을 가지고 있어 토목구조물의 보강에 적합하다. 콘크리트 구조물 보강분야에 CFRP의 적용은 보강이 필요한 구조물들이 점점 증가하면서 점차적으로 확대되고 있다. 그러나, CFRP판을 표면에 부착하는 표면부착 공법으로 보강된 RC 부재들은 설계 시 예상되는 파괴하중보다 작은 하중에서 조기파괴가 발생하게 되어 새로운 보강방법의 필요성이 대두되고 있다. 이러한 표면부착공법의 문제점은 CFRP판을 부착하기 전 긴장력을 도입함으로써 해결될 수 있을 것이다. 본 연구에서는 길이가 3.3 m인 21개의 실험체를 CFRP판 을 이용하여 보강한 후에 4점 휨실험을 실시하였다. CFRP판은 긴장하지 않거나 CFRP판의 변형률을 0.4-0.8%까지 긴장하여 부착하였다. 단부정착 장치를 설치한 모든 실험체는 프리스트레싱 수준과 관계없이 CFRP판의 파단으로 파괴되었으나, 단 부정착 장치가 없는 실험체는 조기 부착파괴로 인해 탄소판이 콘크리트로부터 탈락하면서 파괴되었다. 균열 발생 하중은 프리스트레싱 수준과 비례적인 관계에 있었으나, 프리스트레스를 가한 CFRP판으로 보강한 실험체의 최대하중은 프리스트레싱 수준의 영향을 크게 받지 않았다.

유한요소해석을 이용한 압축 하중을 받는 오픈 홀 복합재 시편의 점진적 손상 및 파손 분석 (Progressive Damage and Failure Analysis of Open-Hole Composite Specimens Under Compressive Loading Using Finite Element Analysis)

  • 김영철;주근수;장홍규;김진봉;강민규;이우경;김지훈
    • Composites Research
    • /
    • 제36권5호
    • /
    • pp.303-309
    • /
    • 2023
  • 본 논문에서는 압축 하중을 받는 오픈 홀(open-hole compression) 탄소섬유 복합재(carbon fiber reinforced plastic, CFRP) 시편의 평면 내 손상(in-plane damage) 및 층간 분리(delamination)를 예측하기 위한 모델링 방법을 제안하고 유한요소해석(finite element analysis)을 수행하였다. 유한요소모델은 오픈 홀 복합재 시편의 점진적 손상 및 파손 분석(progressive damage and failure analysis)을 위해 Hashin 파손 기준(hashin failure criteria)과 표면 기반 응집 거동(cohesive behavior) 모델을 기반으로 구성되었으며 ABAQUS/EXPLICIT Solver를 활용하여 해석을 수행하였다. 유한요소해석의 타당성을 종합적으로 평가하기 위해 세 가지 유형의 적층 패턴(stacking sequences)을 가지는 오픈 홀 압축 복합재 시편에 대한 시험 결과와 비교하였다. 오픈 홀 압축 시편의 강도와 강성은 백분율 오차(percentage error) 10.0 % 미만으로 비교적 잘 예측하였으며 오픈 홀 복합재 적층판의 인장/압축 매트릭스 손상 상태 및 원공(hole) 근처의 복합재 계면 층간 분리에 대한 손상 상태를 추출하여 평가하고 분석하였다.

제품 이송 시 결함 최소화를 위한 CFRP 이중 롤러의 Gap block 설계 전략 (A Strategy of a Gap Block Design in the CFRP Double Roller to Minimize Defects during the Product Conveyance)

  • 양승지;박영준;김성은;안준걸;양현익
    • Composites Research
    • /
    • 제37권1호
    • /
    • pp.7-14
    • /
    • 2024
  • 이중 롤러는 Gap block 설계에 따라 동일한 크기와 하중 조건에서도 다양한 변형 양상을 가질 수 있다. 이러한 특성을 활용하여, 본 연구에서는 제품 이송 과정에서 발생되는 주름과 같은 결함을 최소화하기 위한 Carbonfiber reinforced plastic (CFRP) 이중 롤러의 Gap block 설계 방법을 제안한다. 가장 먼저, Gap block에 대한 주요 설계 변수와 공정 정밀도를 고려한 분석 case들을 선정하고, 유한 요소 해석을 활용하여 CFRP 이중 롤러의 변형 양상을 추출한다. 여기서, 본 연구의 목적을 만족하는 최적의 Gap block 설계를 수행하기 위해, 제품과 롤러가 접촉하는 지점들 간의 변형 편차에 기반하여 CFRP 이중 롤러의 변형 양상들을 비교 분석한다. 그 결과, 본 연구에서 제안한 Gap block 설계 방법을 통해, 롤러의 직경 또는 길이와 같은 전체적인 크기 변화없이 제품 이송 시 결함을 크게 감소시킬 수 있는 최적화된 CFRP 이중 롤러를 구축할 수 있었다.

Quantum annealing을 통한 hybrid composite의 두께 방향 열전도 특성 개선 (Improving Through-thickness Thermal Conductivity Characteristic of Hybrid Composite with Quantum Annealing)

  • 조성욱;전성식
    • Composites Research
    • /
    • 제37권3호
    • /
    • pp.170-178
    • /
    • 2024
  • 본 연구에서는 탄소섬유 강화 플라스틱(CFRP)에 얇은 구리 필름(Cu film)이 배치된 hybrid composite이 제안되었으며, 두께방향 열전도도가 최대가 될 수 있는 Cu film 배치조합을 도출하는데 양자 어닐링(Quantum Annealing)이 적용되었다. CFRP의 각 ply와 Cu film간의 상관관계 분석이 유한요소 해석을 통해 수행되었으며, 수행된 결과를 바탕으로 조합 최적화 문제가 정의되었다. 정의된 문제를 양자 어닐링에 임베딩하기 위한 공식화 과정이 진행되었으며 이를 통해 CFRP의 각 ply에 투입될 수 있는 Cu film 수량에 관한 목적함수와 제약조건이 수식으로 구현되었다. 공식화된 수식은 D-Wave 양자 어닐러에 임베딩되기 위해 Ocean SDK(software development kit)와 Leap을 통해 프로그래밍 되었으며, 양자 어닐링 과정을 통해 두께 방향 열전도도가 최대를 만족하는 최적의 Cu film 배치 조합이 도출되었다. 도출된 배치 조합은 투입될 수 있는 Cu film의 수량이 적어질수록 단순한 배치 형태를 나타내었으며, 수량이 많아질수록 세밀한 배치를 보였다. Cu film의 배치 수량에 따라 생성된 최적 조합들은 두께 방향으로의 고유 열전도 경로를 나타내었으며, Cu film의 횡방향 배치 자유도가 두께 방향 열전도도 결과에 민감하게 나타날 수 있음을 보였다.

위성용 전개형 고안정 반사판 안테나 주반사판 제작 및 검증 (Manufacture and Qualification of Composite Main Reflector of High Stable Deployable Antenna for Satellite)

  • 김동건;김현국;김동연;구경래;안지민;최오영
    • Composites Research
    • /
    • 제37권3호
    • /
    • pp.219-225
    • /
    • 2024
  • 정찰위성의 탑재체인 위성용 전개형 반사판 안테나는 발사 환경에 대한 구조안정성 및 궤도 환경에 대한 운용 성능을 고려하여 경량화, 고성능의 구조 개발이 필수적이다. 그 중, 복합재 주반사판은 전개형 반사판 안테나를 구성하는 핵심 구성품이며, 발사체 탑재 성능을 고려한 경량 설계 뿐만 아니라 위성체 임무 수행 중 민첩한 자세제어 기동 이후 높은 품질의 위성 영상을 획득하기 위해서는 높은 전개 시 강성을 갖는 고성능의 주반사판 개발이 요구된다. 주반사판 개발을 위해 전개형 반사판 안테나를 구성하는 복합재 주반사판의 적층 설계 및 재료 물성에 따른 구조적 성능을 분석하여 주반사판의 초기 설계안을 도출하였으며, 도출된 초기 설계안을 기준으로 제작 공정을 변수로 4가지 타입의 복합재 주반사판을 제작하였다. 공정 변수로는 복합재 구조의 성형 공정, 탄소 섬유 복합재 시트와 허니콤 코어 간 접착 필름의 적용 유/무, 샌드위치 복합재 내부의 벤팅 경로를 선정하였다. 제작된 4가지 종류의 주반사판에 대해 무게 측정, 비파괴 검사, 표면오차 측정 및 모드 시험을 통한 전개 시 강성 측정을 수행하였으며, 경량 및 구조적 성능을 향상시킬 수 있도록 접착 필름을 미적용하며 벤팅 경로를 포함하는 주반사판 제작 공정을 선정하여 SAR(합성 개구 안테나)를 포함한 위성체에 실 적용이 가능한 복합재 주반사판을 개발하였다.

Wearable Computers

  • Cho, Gil-Soo;Barfield, Woodrow;Baird, Kevin
    • 섬유기술과 산업
    • /
    • 제2권4호
    • /
    • pp.490-508
    • /
    • 1998
  • One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

  • PDF

『이충무공전서』 정고본의 지질분석과 보존처리 (Material Properties and Conservation of 『Collection of Yi Chungmugong』 in Manuscript)

  • 임세연;안지윤;양민정
    • 헤리티지:역사와 과학
    • /
    • 제51권4호
    • /
    • pp.108-119
    • /
    • 2018
  • "이충무공전서" 정고본은 1795년 간행된 이충무공전서 1책에 해당하는 부분을 수기(手記)한 것으로 인쇄하기 전 초고(草稿)를 마지막으로 수정해 내용을 완전하게 한 판본으로 추정된다. 책의 형태는 오침안정법(五針眼訂法)의 선장본 형식으로 되어 있으며, 책 하단부분의 습해로 인한 얼룩, 결실, 산화 등 손상으로 보존처리가 시급하였다. 또한 과학적 조사 및 분석을 통해 지질과 섬유의 특성을 밝히고, 보존처리 과정에 반영될 수 있도록 하였다. 종이의 크기(cm), 두께(mm), 무게(g), 평량($g/m^2$), 밀도($g/cm^3$), 발 끈 간격 및 초 수($3{\times}3cm$) 측정 등 지질 조사를 실시하였다. 지질 조사 결과 조선시대 후기 왕실 발행 도서에 이용된 종이 특징을 추정할 수 있었다. 표지, 책지 등의 종이 섬유를 C염색법으로 분석한 결과 닥 인피섬유인 것으로 확인되었고, 장정된 끈은 면(棉) 재질로 확인되었다. 종이에 포함된 첨가물 유무를 확인하기 위해 SEM-EDS 분석을 실시한 결과 주성분인 탄소(C)와 산소(O) 외에 결정화 된 칼슘(Ca) 성분이 검출되었다. 본 유물은 "이충무공전서"의 정고본으로 전해지는 유일한 책으로 학술적 가치가 높으며, 정확한 시대와 발행 기관에 대한 정보가 수록되어 있어 고전적의 인쇄과정을 추측할 수 있다. 또한 본 연구를 통해 전적류 문화재의 보존 및 복원을 위한 기초자료로써 활용될 수 있을 것으로 기대한다.

Prone Breast Phantom을 이용한 couch 산란영향 평가 (Dosimetric effects of couch attenuation and air gaps on prone breast radiation therapy)

  • 김민석;전수동;배선명;백금문;송흥권
    • 대한방사선치료학회지
    • /
    • 제29권2호
    • /
    • pp.43-51
    • /
    • 2017
  • 목 적: 유방암 환자의 방사선치료 시 엎드린 자세를 적용하면 폐와 심장에 들어가는 선량을 줄일 수 있다. 하지만 빔 방향에 포함되는 couch의 영향으로 피부선량 증가 및 심부선량이 감소한다. 따라서 본 실험에서는 air gap을 이용해서 couch로 인한 영향을 줄일 수 있는 방법을 알아보고자 하였다. 대상 및 방법: 본원에서 치료 받은 유방암 환자의 전산화단층영상을 바탕으로 3D 프린터(Builder Extreme 1000)를 이용하여 체적을 동일하게 묘사한 인체모형을 제작하였다. 제작한 인체모형을 전산화단층촬영하고 전산화치료계획시스템(Eclipse 13.6, Varian, USA)을 이용하여 6MV, Field-in-Field technique을 이용한 200 cGy/fx의 치료계획을 수립하였다. 피부선량 측정을 위해 내, 외측 4 지점(Med 1, Med 2, Lat 1, Lat 2)에서 광자극발광선량계(Optically Stimulated Luminescence Detector, OSLD)를 이용한 측정을 진행하였고, 심부선량 측정을 위해 유방의 전면과 후면의 2 지점(Anterior, Posterior)에서 FC65-G ion-chamber를 이용한 측정을 하였다. Couch와 인체모형 사이의 air gap(기준 3 cm)을 1 cm 씩 총 6 cm까지 증가시켜가며 측정하였으며 치료계획 선량을 기준으로 평가하였다. 결 과: 피부선량 측정 결과 외측 지점은 치료계획과 비교하여 ${\pm}5%$ 이내의 유사한 값을 보였다. 내측 1 지점은 air gap이 증가할수록 감소하며 3 cm 이상부터 7 % 이상 감소하였고, 내측 2 지점은 4 % 이상 감소하였다. 심부선량 측정 결과 후면 지점은 air gap 차이에 의한 선량변화가 ${\pm}1%$ 이내의 값을 보였다. 전면 지점의 선량은 air gap이 증가할수록 높아지며 3 cm 이상부터 치료계획 보다 4 % 증가한 값을 보였다. 결 론: 본 실험을 통해 couch와 인체모형 사이의 air gap을 특정 거리까지 증가시켰을 때 couch로 인한 피부선량과 심부선량의 영향이 감소함을 확인하였다. 따라서 유방암 환자에 대한 치료 전 선량평가를 진행하여 각 환자에게 최적의 air gap을 적용한다면 피부보효 효과를 높일 수 있고, 정확한 심부선량의 전달이 가능할 것으로 사료된다.

  • PDF