• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.26-30
• /
• 2008

This study was carried out to develop artificial culture method of Grifola frondosa in polypropylene bag. To find out the favorable substrate formulation of G. frondosa, physicochemical conditions were investigated. The T2 formulation (55 : 25 : 12 : 8) mixing ratio of oak sawdust, oak chip, dried bean-curd refuse and wheat bran showed the shortest time to complete the crop cycle and the highest yield (weight of fresh mushrooms harvested at maturity). Those physicochemical conditions were pH 4.3, 2.4% crude fat contents, 54.1% total carbon, 1.42% total nitrogen, 38.1 C/N ratio, 75.5% porosity and $0.21\;g/cm^3$ bulk density. Among the physicochemical factors, pH, crude fat and total nitrogen may affect mushroom yield. Therefore, development of favorable substrate would be benefit to increase production efficiency of G. frondosa, mushrooms and be commercial potential.

• Journal of the Korea Concrete Institute
• /
• v.24 no.1
• /
• pp.61-70
• /
• 2012

Recently, the government has been working feverously to save energy and reduce greenhouse gas emission by enacting Basic Act on Low Carbon Green Growth at the national level. Improving the insulation performance of building exterior and insulator can reduce the energy in the building sector. This study is about developing light-weight foamed concrete insulation panel that can be applied to buildings to save energy and to find the optimal condition for the development of insulation materials that can save energy by enhancing its physical, kinetic and thermal characteristics. Various experimental factors and conditions were considered in the study such as foam agent types (AES=Alcohol Ethoxy Sulfate, AOS=Alpha-Olefin Sulfonate, VS=Vegetable Soap, FP=Fe-Protein), foam agent dilution concentration (1, 3, 5%), and foam percentage (30, 50, 70%). Experiment results indicated that the surface tension of aqueous solution including foam agent, was lower when AOS was used over other foam agents. FP produced relatively stable foams in 3% or more, which produced unstable foams containing high water content and low surface tension when diluted at low concentration. Depending on foam agent types, compressive strength and thermal conductivity were similar at low density range but showed some differences at high concentration range. In addition, when concentrations of foam agent and foaming ratio increased, pore size increased and open pores are formed. In all types of foam agent, thermal conductivity were excellent, satisfying KS standards. The most outstanding performance for insulation panel was obtained when FP 3% was used.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.662-668
• /
• 2018

Most electric rooms are located in the underground spaces of buildings. When a fire occurs in electrical equipment, the fire expands to cable insulation material, resulting in toxic smoke and combustion products. If the smoke and combustion products quickly move vertically and horizontally, the evacuation of occupants and firefighting activities will be hindered. Therefore, it is necessary to design optimal equipment for smoke control in cases of fires in electric rooms. This study analyzes the characteristics of smoke and combustion products in fires in a cubicle-type switchboard in an electric room using PyroSim, which is based on the program Fire Dynamics Simulator (FDS). The fire modeling consists of four scenarios according to the operation mode of the mechanical ventilation equipment, the amount of air supply and exhaust, and the location of the air supply slot. The analysis shows that the mechanical ventilation equipment improves the smoke density, visibility, carbon monoxide concentration, and temperature characteristics. The visibility and temperature characteristics were improved when the air flow rate and the location of the air supply slot from fire defense regulations were applied.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.249-252
• /
• 2016

Timing, place, and the high-tech industry to overcome barriers to the introduct of the so-called "smart agriculture". The core factors of precision agriculture, including temperature, humidity, location information, and real summary information, are all significant for ICT controlling technique. The system is a four-season container allowing mushroom product, humidity, illumination, and factors such as carbon dioxide were regulated to create the optimal environment for mushroom cultivation. Hericium erinaceum (also called Lion's Mane Mushroom, Bearded Tooth Mushroom, or Bearded Tooth Fungus) is an edible and medicinal mushroom in the tooth fungus group. During approximately 40 days of incubation, 1.4 kg of oak sawdust was used as the test medium. The humidity, temperature, and $CO_2$ density were maintained at >85-95%, $18-20^{\circ}C$, and 700-1,000 ppm, respectively, in the container type culture system. The time for primordium formation was observed to be 4-7 days. The amount of fruitbody production was 74-95 g per bag. This technique will be used to establish a new community support program, in conjunction with international movement, domestic sales and exports are also planned.

• Microbiology and Biotechnology Letters
• /
• v.10 no.2
• /
• pp.133-144
• /
• 1982

The distribution of acid phosphatase activity was investigated with 141 microorganisms from the type culture collection of Chong Kun Dang laboratory and the 41 strains isolated from natural sources. The phytase activity was detected mainly with fungal strains. A fungus isolated from soil and identified as Aspergillus niger had shown the highest phytase activity. The environmental conditions for the enzyme formation by the isolate and some properties of the enzyme were also studied. The results obtained were as follows: (1) The highest phytase production was observed when the fungus was cultivated at 28$^{\circ}C$ for 5 days in the corn starch based medium using the cells incubated at 34$^{\circ}C$ for 3 days as a seed. (2) The optimal initial pH of the culture medium was found to around 2 for the formation of phytase. (3) Sucrose was proved to be one of the most effective carbon sources tested for the enzyme production. (4) As an inorganic nitrogen source, potassium nitrate was found to give a good result in the production of phytase. (5) Synthesis of phytase was significantly increased by the supplement with 0.2 % corn steep liquor to the basal medium as an organic nitrogen source. (6) At the concentration of 40-80 mg inorganic phosphate per liter of the culture medium, the enzyme formation revealed the highest level. But as the phosphate was increased above this optimum concentration the phytase activity was drastically decreased although the cell density showed to be still increasing

• Microbiology and Biotechnology Letters
• /
• v.44 no.3
• /
• pp.341-348
• /
• 2016

This study aimed to develop a microbial process for producing aminolevulinic acid (ALA) using crude glycerol. In the culture of ALA-producing cells (Escherichia coli/pH-hemA) in a medium containing crude glycerol, the cell density and production were 1.8-fold and 1.2-fold lower than those obtained from pure glycerol, respectively. However, the cell growth and production were improved by supplementing the medium with trehalose (30 or 100 g/l). Engineered cells (E. coli/pH-hemA/pS-otsBA) were constructed to express otsBA and their culture performance was compared with that of control cells (E. coli/pH-hemA/ pSTV28). The effects of isopropyl β-D-1-thiogalactopyranoside (IPTG) concentration and the time of induction were examined to improve the cell growth and ALA production in engineered cells cultured using crude glycerol. When 0.6 mM of IPTG was added at the beginning of the exponential growth phase, the ALA produced by cells was 2,121 mg/l, which was comparable to that from pure glycerol. The results demonstrate that otsBA expression endowed cells with the capacity to tolerate the toxicity of crude glycerol for direct use.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.499-504
• /
• 2015

The composite anodes of expanded graphite (EG) and multiwall carbon nanotube (MWCNT) for microbial fuel cells were fabricated by using coal tar pitch (CTP) binder containing nickel (Ni), and the effect of the anodes with the binders on the performance of the MFCs were examined in a batch reactor. During the start-up of the MFCs, quick increase in voltage was observed after a short lag phase time, indicating that the CTP binder is biocompatible. The biomass attatched on the anode surface was more at higher Ni content in the binder, as well as at smaller amount of CTP binder for the fabrication of the anode. The internal resistance of the MFC was smaller for the anode with more biomass. Based on the results, the ideal combination of CTP and Ni for the CTP binder for anode was 2 g and 0.2 g, respectively. The maximum power density was $731.8mW/m^2$, which was higher 23.7% than the anode with Nafion binder as control. The CTP binder containing Ni for the fabrication of anode is a good alternative in terms of performance and economics of MFCs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.11 no.3
• /
• pp.160-163
• /
• 2008

$CO_2$ ocean sequestration is being considered as a way to earn a frame of time to change other industrial life pattern to overcome the global warming crisis. The method is to dilute the captured $CO_2$ into ocean by ejecting the liquefied $CO_2$ through nozzles. The main issue of such method is the effectiveness and safety, and in both problems the rising speed of those LCO2 droplet is the key parameter. In this paper, the rising speed of LCO2 droplets is numerically studied including the effect of the surfactant which can be residing along the density interface of the droplets. A front tracking method with a simple surface tension model is developed and the rising speed of the droplets is carefully investigated with varying the various parameters. It is demonstrated that the variable surface tension can change the deformation of the droplet, the flow near the interface, and the rising speed.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.4
• /
• pp.164-173
• /
• 2004

Field survey on the marine environmental characteristics by the distribution of dinoflagellate cysts and organic matter was carried out bimonthly at 6 stations in Gamak Bay, the southern part of Korean Peninsula from June 2000 to April 2001. The range of environmental factors on vertical sediments such as ignition loss (IL), chemical oxygen demand (CODs), total sulfide (H₂S), particulate organic carbon (POC), particulate organic nitrogen (PON) and phaeopigment were 3.21∼11.18％. 12.25∼99.26 mgO₂/g dry, 2.49∼116.18 ㎍/g dry, 2.91∼116.18 mgC/g dry, 0.53∼2.82 mgN/g dry and 2.49∼116.18 ㎍/g dry, respectively. A total of 38 species dinoflageuate cysts belonged to 21 genera, 36 species, and 2 unidentified species. A cysts density were 18∼3,836 cysts/g dry. Vertical distribution of organic matter and dinoflagellate cysts was rapidly decreased from surface to deeper sediment. The eutrophication in the northwestern parts of Gamak Bay might originated since 1980s.

• The Korean Journal of Physiology
• /
• v.22 no.2
• /
• pp.307-318
• /
• 1988

Properties of succinate transport were examined in basolaterat membrane vesicles (BLMV) isolated from rabbit renal cortex. An inwardly directed $Na^+$ gradient stimulated succinate uptake and led to a transient overshoot. $K^+,{\;}Li^+,{\;}Rb^+$ and choline could not substitute for $Na^+$ in the uptake process. The dependence of the initial uptake rate of succinate on $Na^+$ concentration exhibited sigmoidal kinetics, indicating interaction of more than one $Na^+$ with transporter Hill coefficient for $Na^+$ was calculated to be 2.0. The $Na^+-dependent$ succinate uptake was electrogenic, resulting in the transfer of positive charge across the membrane. The succinate uptake into BLMV showed a pH optimum at external pH $7.5{\sim}8.0$, whereas succinate uptake into brush border membrane vesicles (BBMV) did not depend on external pH. Kinetic analysis showed that a Na-dependent succinate uptake in BLMV occurred via a single transport system, with an apparent Km of $15.5{\pm}0.94{\;}{\mu}M$ and Vmax of $16.22{\pm}0.25{\;}nmole/mg{\;}protein/min$. Succinate uptake was strongly inhibited by $4{\sim}5$ carbon dicarboxylates, whereas monocarboxylates and other organic anions showed a little or no effect. The succinate transport system preferred dicarboxylates in trans-configuration (furmarate) over cis-dicarboxylates (maleate). Succinate uptake was inhibited by the anion transport inhibitors DIDS, SITS and furosemide, and $Na^+-coupled$ transport inhibitor harmaline. These results indicate the existence of a $Na^+-dependent$ succinate transport system in BLMV that may be shared by the other Krebs cycle intemediates. This transport system seems to be very similar to the luminal transport system for dicarboxylates.