• 제목/요약/키워드: Carbon cryogel

검색결과 5건 처리시간 0.015초

Preparation and Electrochemical Properties of Carbon Cryogel for Supercapacitor

  • Song, Min-Seob;Nahm, Sahn;Oh, Young-Jei
    • 한국세라믹학회지
    • /
    • 제45권11호
    • /
    • pp.662-666
    • /
    • 2008
  • Electrochemical properties of carbon cryogel electrode for the application of composite electrode materials mixed with metal oxide in supercapacitor have been studied. Carbon cryogels were synthesized by sol-gel polycondensation of resorcinol with form aldehyde, followed by a freeze drying, and then pyrolysis in an inert atmosphere. Physical properties of carbon cryogel were characterized by BET, X-ray diffraction (XRD) and scanning electron microscopy (SEM). It is found that carbon cryogel is amorphous material. The electrochemical properties of carbon cryogel were measured by cyclic voltammetry as a function of concentration of liquid electrolyte, galvanostatic charge-discharge with different scan rates and electrochemical impedance measurements. The result of cyclic voltammetry indicated that the specific capacitance value of a carbon cryogel electrode was approximately 150.2 F/g (at 5 mV/s in 6M KOH electrolyte).

수정진동자를 이용한 흡착특성의 측정 (Measurement of Adsorption Characteristic Using a Quartz Crystal Resonator)

  • 김병철;성익기;야마모토 타쿠지;김영한
    • Korean Chemical Engineering Research
    • /
    • 제47권3호
    • /
    • pp.368-372
    • /
    • 2009
  • 흡착제의 흡착특성인 흡착표면적과 세공크기를 수정진동자를 이용하여 측정하는 방법을 제안하고 그 성능을 조사하였다. 액체질소를 활용하는 기존의 방법에 비해 상온에서 이산화탄소를 이용하기 때문에 장치가 소형이고, 조작이 간편하며 짧은 흡착시간 내 측정이 가능한 이점을 가지고 있다. 마이크로 입자의 카본 크라오젤과 대나무 활성탄에 대해 흡착특성을 측정한 측정치를 흡착능 측정기로 측정한 측정치와 비교한 결과 메조세공의 흡착제에 대해서는 유효한 측정치가 얻어진 반면 마이크로 세공의 입자에서는 다소 큰 오차를 나타내었다.

흡착공정용 온라인 측정시스템의 개발 (Development of On-Line Measurement System for Adsorption Process)

  • 김병철;이기성;야마모토 타쿠지;김영한
    • Korean Chemical Engineering Research
    • /
    • 제47권3호
    • /
    • pp.321-326
    • /
    • 2009
  • 간단한 기체농도 측정장치를 제안하여, 혼합기체를 분리하는 흡착공정에서 성능을 실험적으로 조사하였다. 측정센서는 수정진동자의 전극에 고체의 흡착제를 도포하여 유효성분을 선택적으로 분리하게 하여 농도를 측정하였다. 센서용 흡착제는 마이크로 입자의 카본 크라이오젤(Micro-Particle Carbon(MCC))을 사용하였고, 공기와 i-부탄의 혼합기체를 대상으로 대나무 활성탄을 채운 칼럼에서 분리하는 공정을 사용하였다. 칼럼의 입구와 출구에 측정시스템을 각각 장치하고 i-부탄의 농도를 측정하였다. 입구와 출구의 실제농도를 GC로 측정한 결과와 측정한 수정진동자의 공진주파수를 비교하여 제안한 측정시스템이 유용하게 농도를 측정할 수 있음을 보였다. 실험을 통하여 제안하는 시스템이 비교적 간단한 장치로, 실시간 인라인 측정이 가능함을 입증하여 실제공정에 유용하게 활용할 수 있음을 보였다.

솔-젤 합성에 의한 직접 메탄올 연료전지용 고분산 Pt-Ru/C 음극 촉매의 제조 (A Study on Sol-gel Preparation of Pt-Ru/C Anode Catalysts for Direct Methanol Fuel Cells)

  • 이강희;김일곤;박태진;서동진
    • 전기화학회지
    • /
    • 제6권1호
    • /
    • pp.13-17
    • /
    • 2003
  • 직접 메탄을 연료전지의 음극 촉매로 사용되는 Pt-Ru/C를 솔-젤법을 이용하여 크라이오젤 및 에어로젤 형태로 제조하였다. 탄소의 원료가 되는 유기물의 종류에 따라 B종의 촉매를 제조하였으며 XRD분석에 의해 금속이 탄소담체 위에 고분산되어 있음을 확인하였다. 초임계건조, 탄화. 환원 공정을 거쳐 완성된 에어로젤 촉매의 전극 활성은 Cyclic voltametry를 이용한 half cell test를 통하여 평가하였다. 그 중 Phloroglucinol-Formaldehyde(PF) 형의 촉매가 가장 우수한 활성을 보였으며 내구성 또한 양호하였다.

대용량 액체 수소 저장탱크를 위한 다층단열재의 단열성능 분석 (Adiabatic Performance of Layered Insulating Materials for Bulk LH2 Storage Tanks)

  • 김경호;신동환;김용찬;강상우
    • 한국수소및신에너지학회논문집
    • /
    • 제27권6호
    • /
    • pp.642-650
    • /
    • 2016
  • One of the most feasible solution for reducing the excessive energy consumption and carbon dioxide emission is usage of more efficient fuel such as hydrogen. As is well known, there are three viable technologies for storing hydrogen fuel: compressed gas, metal hydride absorption, and cryogenic liquid. In these technologies, the storage for liquid hydrogen has better energy density by weight than other storage methods. However, the cryogenic liquid storage has a significant disadvantage of boiling losses. That is, high performance of thermal insulation systems must be studied for reducing the boiling losses. This paper presents an experimental study on the effective thermal conductivities of the composite layered insulation with aerogel blankets($Cryogel^{(R)}$ Z and $Pyrogel^{(R)}$ XT-E) and Multi-layer insulation(MLI). The aerogel blankets are known as high porous materials and the good insulators within a soft vacuum range($10^{-3}{\sim}1$ Torr). Also, MLI is known as the best insulator within a high vacuum range(<$10^{-6}{\sim}10^{-3}$ Torr). A vertical axial cryogenic experimental apparatus was designed to investigate the thermal performance of the composite layered insulators under cryogenic conditions as well as consist of a cold mass tank, a heat absorber, annular vacuum space, and an insulators space. The composite insulators were laminated in the insulator space that height was 50 mm. In this study, the effective thermal conductivities of the materials were evaluated by measuring boil-off rate of liquid nitrogen and liquid argon in the cold mass tank.